Filter
Master Degrees
Czech Republic

Page 2 of 2, search Masters Programs in Technology Studies in Czech Republic 2019

Master-level studies involve specialized study in a field of research or an area of professional practice. Earning a master’s degree demonstrates a higher level of mastery of the subject. Earning a master’s degree can take anywhere from a year to three or four years. Before you can graduate, you usually must write and defend a thesis, a long paper that is the culmination of your specialized research.

Although technology may seem like a contemporary development, humans have been using technology since they began converting natural resources into tools. For example, the understanding of fire and its use in prehistoric cooking could be considered a facet of technology.

Master 16-21 (out of 21). Top Master Programs in Technology Studies in Czech Republic 2019

Read More Read Less
Other options within this field of study:

21 Results in Technology Studies, Czech Republic

Charles University Faculty of Mathematics and Physics

This Master Program focuses on deeper knowledge of various mathematical disciplines and their algorithmic aspects. The student can get specialized either in Mathematics f ... [+]

This master's program focuses on deeper knowledge of various mathematical disciplines and their algorithmic aspects. The student can specialize either in Mathematics for Information Security or in Computer Geometry.

Mathematics for Information Security focuses on deepening theoretical knowledge of number theory, probability theory, the theory of error-correcting codes, complexity theory, theory of elliptic curves, and computer algebra applied to some of these subjects. Attention is also given to practical aspects such as internet security, standards in cryptography, and legal aspects of data security.

Computer Geometry deepens theoretical knowledge in various algebraic and geometric subjects together with their applications in the geometry of computer vision and robotics, computer graphics and image processing, optimization methods, and numerical linear algebra.... [-]

Czech Republic Prague
October 2019
Full-time
2 years
Campus
Charles University Faculty of Mathematics and Physics

The study plans Discrete Mathematics and Combinatorial Optimization and Mathematical Structures in Computer Science provide advanced knowledge in the fields of applied ma ... [+]

The study plans Discrete Mathematics and Combinatorial Optimization and Mathematical Structures in Computer Science provide advanced knowledge in the fields of applied mathematics and computer science. An emphasis is put on up-to-date theoretical and applied questions in the area. The study plans Optimization and Mathematical Economics provide skills to solve difficult technical and economical problems with the use of optimization methods and suitable methods from mathematical economics.

Description of verification and evaluation criteria

Conditions for Admission

The goal of the admissions review process is to select from the pool of applicants those individuals who have shown the capability and diligence expected of Charles University students. To apply for our Computer Science or Mathematics Master's programs given in English you must... [-]

Czech Republic Prague
October 2019
Full-time
2 years
Campus
Charles University Faculty of Mathematics and Physics

The aim of the Computational Linguistics program is to prepare students for research in the area of natural language processing and the development of applications dealin ... [+]

The aim of the Computational Linguistics program is to prepare students for research in the area of natural language processing and the development of applications dealing with both written and spoken language. Examples of such applications are systems of information retrieval, machine translation, grammar checking, text summarization and information extraction, automatic speech recognition, voice control, spoken dialogue systems, and speech synthesis.

Description of verification and evaluation criteria

Conditions for Admission

The goal of the admissions review process is to select from the pool of applicants those individuals who have shown the capability and diligence expected of Charles University students. To apply for our Computer Science or Mathematics Master's programs given in English you must... [-]

Czech Republic Prague
October 2019
Full-time
2 years
Campus
University of Chemistry and Technology, Prague

The programme prepares experts with high-level knowledge of environmental chemistry, microbiology, hydrobiology, water and atmosphere technologies, decontamination techno ... [+]

Overview

The programme prepares experts with high-level knowledge of environmental chemistry, microbiology, hydrobiology, water and atmosphere technologies, decontamination technologies and waste handling technologies. The interdisciplinary character of the programme supports employability of the graduates in all areas related to environmental protection and engineering. The programme provides students with comprehensive knowledge of environmental protection and engineering. The study involves areas of atmosphere, water and soil protection. The programme particularly focuses to education of experts specialized in waste production both in industrial and municipal areas. The programme also concentrates on prevention and minimization of waste production, on waste utilization and reprocessing, waste removal and assessment of environmental impacts. An important part of the programme is devoted to water technologies and air protection technologies. The programme also involves education oriented towards industrial toxicology, ecotoxicology, environmental analysis, decontamination technologies and environmentally oriented legislation.... [-]

Czech Republic Prague
September 2019
Full-time
2 years
Campus
University of Chemistry and Technology, Prague

The study programme “Chemistry, Technology and Materials“ (CTM) consists of two specializations, viz. “Chemistry and Chemical Technology“ (CCT) and “Materials Chemistry a ... [+]

Overview

The study programme “Chemistry, Technology and Materials“ (CTM) consists of two specializations, viz. “Chemistry and Chemical Technology“ (CCT) and “Materials Chemistry and Technology“ (MCT). This programme is designed as a follow-up master programme (aiming at a master degree with the Czech title Ing., which is equivalent to the title MSc.) continuing the education of graduates with bachelor degree (Bc.) from the bachelor programme “Chemistry and Technology“ obtained at the UCT Prague or from an equivalent bachelor programme at a university or comparable institution abroad. The study programme CTM is taught in English (requiring English language skills at least at the B2 level) and is designed for students that cannot or do not want to enter a Czech study programme.... [-]

Czech Republic Prague
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

This program focuses on the education of experts in the field of supercomputing and the use of high-performance computing in solving computationally demanding tasks in ap ... [+]

Branch Profile

This program focuses on the education of experts in the field of supercomputing and the use of high-performance computing in solving computationally demanding tasks in applied sciences, as well as technology. It has a unique advantage of its association with the IT4Innovations National Supercomputing Centre, one of Europe’s most powerful supercomputers, located on the University campus. This provides a hands-on opportunity for the practical application of theoretical instruction.

Key Learning Outcomes

KNOWLEDGE

Students will become familiar with various architectures of today’s supercomputers and will learn to program effectively, making use of computational resources to solve demanding practical problems.... [-]

Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

The Branch is focused to the exploitation of computers and automation of technological processes above all in the metallurgical industry by application of knowledge in th ... [+]

Study Branch

Economics and Management of Industrial Systems

Branch Profile

The Branch is focused to the exploitation of computers and automation of technological processes above all in the metallurgical industry by application of knowledge in the field of theory of automated control, integrated computer systems, modern methods of control with the exploitation of artificial intelligence and applied informatics and control of technological aggregates and processes.

Key Learning Outcomes

Knowledge

advanced scientific methods of modeling, simulation and optimal control of dynamic systems, modern tools and techniques for designing and implementation of complex control systems based on programmable logic controllers, programming of information systems and modern control methods, detailed knowledge of industrial technologies, especially in the field of metallurgy and related technologies. ... [-]
Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

The Master‘s Study Branch of Nanotechnology is the second level of nanotechnology study following upon Bachelor’s study. ... [+]

Branch Profile

The Master‘s Study Branch of Nanotechnology is the second level of nanotechnology study following upon Bachelor’s study. The study program contains more advanced methods of the structural and properties’ study of nanomaterials, theoretical and experimental approaches. During the first year of study, students may choose one of two orientations - physical or chemical. Both orientations have common fundamental theoretical and experimental subjects including modeling and computer design of nanomaterials.

Key Learning Outcomes KNOWLEDGE

The aim of the master‘s study of Nanotechnology is to provide advanced education of characterization and properties of nanomaterials. Students extend their knowledge of mathematics, physics, and chemistry in specialized subjects as electron microscopy, magnetic and optic properties of nanomaterials. The program includes the study of the relationship between properties of nanomaterials and their structures and utility as well. Graduates will have gained detailed knowledge about modern methods of structure study (for example electron microscopy, atomic force microscopy etc.).... [-]

Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

The goal of the master study program Mechatronics, specialization Automotive Electronics is to prepare the graduates for work in research and development, and the design ... [+]

Branch Profile

The goal of the master study program Mechatronics, specialization Automotive Electronics is to prepare the graduates for work in research and development, and the design of mechatronic systems with a focus on automotive applications.

Key Learning Outcomes KNOWLEDGE

Graduates will have gained knowledge of mathematics, electronic circuits, information technology, communication technology as well as specialized knowledge of applied electronics.

SKILLS

Graduates are able to analyze the dynamic properties of the complex structural system and use the mathematical/physical modeling and simulation of dynamic systems.

GENERAL COMPETENCIES

The background from electrical, mechanical and control engineering allows graduates to work with complexly structured systems and to consider the interaction of different dynamic subsystems of a car.... [-]

Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

Students specialize in either Commercial or Industrial Electronics complimenting a basic study of electrical engineering. There is a particular emphasis placed on a highl ... [+]

Faculty of Electrical Engineering and Computer Science

Study Branch

Applied Electronics

Branch Profile

Students specialize in either Commercial or Industrial Electronics complimenting a basic study of electrical engineering. There is a particular emphasis placed on a highly efficient education in order to teach students to think creatively and apply new knowledge in the creation of new technical pieces of work. The instruction is focused on the practical and facilitates the development of distinctive diploma theses.

Key Learning Outcomes

Knowledge

Graduates have a broad and deep knowledge in the technical fields of this branch, which corresponds to the current state of the art. They understand the state-of-the-art theories, concepts, and methods of the branch. They are able to apply knowledge from related branches in their own branch. Students of Applied Electronics acquires the necessary knowledge of mathematics, the theory of electrical circuits, information technology, and special knowledge in the following technical fields:... [-]

Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

Computational Mathematics has a distinct focus on the important areas of applied mathematics relative to other branches of Information and Communication Technology, which ... [+]

Faculty of Electrical Engineering and Computer Science

Study Branch

Computational Mathematics

Branch Profile

Computational Mathematics has a distinct focus on the important areas of applied mathematics relative to other branches of Information and Communication Technology, which the students can use when dealing with practical problems in the workplace. Students gain a solid base for a career, or can continue in a doctoral programme focusing on the development of new methods for computational solutions of engineering problems with particular application in R&D. Computational Mathematics is a branch of the study programme of Information and Communication Technology.

Key Learning Outcomes ... [-]
Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

The Master’s course of Computer Science and Technology provides the students with an education designed to help them find employment mainly in the field of creation and a ... [+]

Faculty of Electrical Engineering and Computer Science

Study Branch

Computer Science and Technology

Branch Profile

The Master’s course of Computer Science and Technology provides the students with an education designed to help them find employment mainly in the field of creation and administration of various extensive and complex software products, in the creation and administration of computational systems and computer networks, in the production of computers and their components, and finally, among others, in the fields of business and education. Apart from the knowledge ensuring very good chances of employment in practice, the students are educated in relevant theoretical areas as well, which enables them to find employment in R&D as well as to continue their studies in the doctoral programme.... [-]

Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

The aim of the course is to cultivate engineers as specialists in the fields of automation, control systems, measurement, and sensors using cutting-edge laboratories and ... [+]

Faculty of Electrical Engineering and Computer Science

Study Branch

Control and Information Systems

Branch Profile

The aim of the course is to cultivate engineers as specialists in the fields of automation, control systems, measurement, and sensors using cutting-edge laboratories and expert instruction. The priority of the Branch is to teach students to approach technical problem solving creatively, and to deal with assignments in the field of measurement and control engineering independently and systematically – i.e. to acquire all skills that are necessary for work as an engineer.

Key Learning Outcomes

Knowledge

The graduates have detailed knowledge in the technical areas they acquaint themselves with over the course of their studies. The students can focus on the following specializations:... [-]

Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Technical University of Ostrava

Graduates gain experience in the field of information and communication technologies with a focus on the mobile networks. They can design, operate, modify and optimize mo ... [+]

Faculty of Electrical Engineering and Computer Science

Study Branch

Mobile Technology

Branch Profile

Graduates gain experience in the field of information and communication technologies with a focus on the mobile networks. They can design, operate, modify and optimize mobile wireless networks, develop, and optimize applications for mobile devices, and have knowledge of mobile networks, radio technology and software designing of applications for mobile devices. Practical laboratory training is carried out in coordination and cooperation with experts of leading telecommunications companies which focus on providing mobile services such as T-Mobile and O2.

The study also focuses on business needs and its incorporation in the design of appropriate mobile applications, both in the sphere of labor-service and areas of administration and management. Graduates have the potential to control the technical tasks related to the operation of mobile networks and the design and implementation of customized solutions. Graduates are in strong demand as mobile network engineers and developers of software for mobile devices.... [-]

Czech Republic Ostrava
September 2019
Full-time
2 years
Campus
Brno University of Technology

Master study program Information Technology broads and deepens knowledge and skills of bachelors degree study programs focused on informatics or information technology. ... [+]

Why study at FIT BUT? The best technologies – supercomputing, modern labs, flight simulator Practical orientation – industry, research, projects Campus – old monastery full of modern facilities Graduates – high demand, 99% in 3 months, 120% salary Brno – Silicon Valley of Europe Learn from the best – lecturers are research leaders International cooperation Become the elite in IT at FIT BUT „Be part of one of the leading European institutions“

Located in the unique, former Carthusian monastery, interconnected with a new modern building near the city centre, the Faculty of Information Technology (FIT) is one of the leading European educational and research institutions providing top quality degrees in information and computer technologies. Students are encouraged to work on their own projects in the Faculty’s Computer Centre and to join teams pursuing national and international research in state-of-the-art laboratories, including, but not limited to, multimedia, biometrics, optics and robotics.... [-]

Czech Republic Brno
September 2019
Full-time
2 years
Campus