Part time Master's Degree in Mechatronics in Europe

Search Part time Masters Programs in Mechatronics in Europe 2018

Mechatronics

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Mechatronics is an applied science formed by merging aspects of the mechanics, electronics, automation, and robotics fields into a new discipline. At the forefront of technology, mechatronics graduates transfer trending technological achievements to optimize products or create solutions.

There are more than four thousand higher education organizations in Europe, from leading research institutions to small, teaching-focused universities. Europe itself is not as much different than other continents, reaching from the Arctic Circle to the coast of Africa.

Contact Schools Best Part time Masters Degrees in Mechatronics in Europe 2018

Read More

Master’s Degree in Mechatronic System Design (Lappeenranta University of Technology)

Edunation
Campus 2 years September 2018 Finland Tampere

In the Master’s program Mechatronic System Design, you will be familiarized with the design and simulation of modern mechatronic machines, which comprise a mechanical system, power transmission (hydraulic, electric, pneumatic or hybrid) and a digital control system. [+]

Intense competition is putting pressure on machine builders to deliver machines with higher output, reduced operating cost, and increased safety.

Increasing demands on the productivity of complex systems, such as manufacturing machines, requires the application of new methods in the product development process. Mechatronic system design is gaining popularity in the machine design process and it is a key approach in the production process of productive life cycle efficient machines.

In the Master’s program Mechatronic System Design, you will be familiarised with the design and simulation of modern mechatronic machines, which comprise a mechanical system, power transmission (hydraulic, electric, pneumatic or hybrid) and a digital control system.... [-]


Master in Electrical Engineering and Informatics, Mechatronics

Technical University of Liberec
Campus 2 years September 2018 Czech Republic Liberec

Mechatronics is an interdisciplinary programme integrating knowledge from electronics, mechanics, informatics and operations. Its substantial features are artificial intelligence, interactivity, autonomous behaviour and advanced structures. [+]

Description

This dual degree master course is based on a cooperation between the Technical University of Liberec, Faculty of Mechatronics, Informatics and Interdisciplinary Studies (Czech Republic) and the Zittau/Görlitz University of Applied Sciences, Faculty of Electrical Engineering and Computer Sciences (Germany).

Mechatronics is an interdisciplinary programme integrating knowledge from electronics, mechanics, informatics and operations. Its substantial features are artificial intelligence, interactivity, autonomous behaviour and advanced structures. It is used in many disciplines such as robotics, intelligent sensors, satellite technology etc.

Since the TUL programmes are recognized by the European Federation of National Engineering Associations FEANI, alumni are eligible for the EUR ING title.... [-]


Master's Degree In Mechatronics

Universidade de Évora
Campus 2 years October 2018 Portugal Évora

The second cycle in Mechatronics Engineering aims to empower its students with 3 skill levels. [+]

PRESENTATION

The second cycle in Mechatronics Engineering aims to empower its students with 3 skill levels:

general 1.Competências - Professionalism in Engineering, ability to work in team and leadership; reading ability and comprehension of scientific and technical articles; capacity analysis results; ability to propose new original solutions in the context of development or research; capacity utilization acquired knowledge for solving complex and unfamiliar problems in multidisciplinary contexts;

specific 2.Competências - ability to use advanced mathematical methods in the design and design of new Mechatronic equipment; enabling the development of Mechatronic equipment; ability to create and modify simulation software; capacity development and implementation of automated systems for the manufacture or testing of industrial products (integration of different technologies, pneumatics, electronics, machine vision); ability to prepare the planning of the manufacture of new products. ... [-]


MSc in Mechanics and Machine Design

Cracow University of Technology
Campus 3 semesters October 2018 Poland Kraków

Advanced Computational Mechanics (ACM) is addressed for students who want to increase their knowledge in mechanics and computer application in design of structures (CAD, FEM), material design (CAMD), material selection (CAMS), manufacturing (CAM) and monitoring of machines. [+]

Program description:

Advanced Computational Mechanics (ACM) is addressed for students who want to increase their knowledge in mechanics and computer application in design of structures (CAD, FEM), material design (CAMD), material selection (CAMS), manufacturing (CAM) and monitoring of machines.

Program of studies:

Regular:

Advanced mathematics (4 ECTS), Engineering mathematics II (2 ECTS), Solid state physics (2 ECTS), Continuum mechanics (2 ECTS), Analytical mechanics (2 ECTS), Numerical methods II (2 ECTS), Objectoriented programming (1 ECTS), Material science II (4 ECTS), Modern structural materials (2 ECTS), Advanced modeling of materials and structures (5 ECTS), Modeling in machine design (4 ECTS), Integrated processing systems (3 ECTS), Advanced FEM modeling (4 ECTS), Advanced strength of materials (2 ECTS), Dynamics of mechanical systems (2 ECTS), Experimental mechanics of solids (2 ECTS), Individual project (5 ECTS), Seminar (3 ECTS), Final project (20 ECTS) ... [-]

Master in Advanced Mechatronics

Université Savoie Mont Blanc
Campus 4 semesters September 2018 France Annecy-le-Vieux

Mechatronics is a synergistic and integrated process of several sciences and skills (among which control and computer sciences, electronics, mechanics) which allows to conceive and to design products and systems with augmented or improved functionality and which requires to consider the conception of the product or system in its overall lifecycle in a cooperative interdisciplinary approach. [+]

OBJECTIVE

Mechatronics is a synergistic and integrated process of several sciences and skills (among which control and computer sciences, electronics, mechanics) which allows to conceive and to design products and systems with augmented or improved functionality and which requires to consider the conception of the product or system in its overall lifecycle in a cooperative interdisciplinary approach.

After having completed this program, the students are being prepared for Ph.D. studies. They can also work as engineers or occupy high level technical and scientific positions in research centers, in research and development departments and in specialized consulting firms.

COMPETENCIES AND KNOW-HOW ... [-]

Master in Software engineering in Mechatronics (double degree program with Lappeenranta University of Technology, LUT)

Samara National Research University
Campus 2 years September 2018 Russia Samara

The purpose of the Master’s double degree program in the area of software engineering is the training of world-class specialists in design and implementation of software products and information systems. The Master’s degree graduates receive a comprehensive set of competencies in such areas as applied mathematics, software engineering, software analysis methods, database design, project management methodology, and organization of advanced mechanical engineering, including product lifecycle management. [+]

Master’s program “Software engineering in Mechatronics” was established in collaboration with one of the leading higher education institutions of Finland – Lappeenranta University of Technology (LUT).

The students have a unique opportunity to exchange experience with domestic and foreign specialists in the area of software and information systems development and acquire premium level education equally authenticated by diplomas of both universities (Russian and European template).

The training takes two years. The second-year occurs at the premises of LUT. The graduates can be employed by professional Russian and foreign companies supplying for the needs of industry, business, power structures, and research and development centers.... [-]


Master in Mechatronics Systems (Lappeenranta University of Technology)

Samara National Research University
Campus 2 years September 2018 Russia Samara

The Master’s programme “Mechatronics Systems”, within course 24.04.05 “Aircraft Engines”, was created together with one of the leading universities in Finland, Lappeenranta University of Technology (LUT). [+]

The Master’s programme “Mechatronics Systems”, within course 24.04.05 “Aircraft Engines”, was created together with one of the leading universities in Finland, Lappeenranta University of Technology (LUT).

The students have the unique opportunity of borrowing the experience not only of Russian, but also foreign specialists in the field of building mechatronics systems and receiving education of the highest level, confirmed simultaneously with two diplomas, Russian and European.

The programme graduates receive not only deep theoretical knowledge, but also broad practical skills in automatic control systems, commercial pneumatic and hydraulic units, and mechatronics systems. The students study theory without separation from practice, which is supported by multiple laboratory equipment units, created on the basis of modern commercial models. The graduates in this academic programme are in demand both by Russian enterprises and foreign companies working with automation and mechatronics.... [-]


Master in Automation and Mechatronics

Saint Petersburg Electrotechnical University
Campus 2 years September 2018 Russia St. Petersburg

The structure of the degree program consists of advanced professional studies, elective courses and Master’s Thesis. [+]

Programme: 120 ECTS credits, full-time study (2 years), Master’s Degree

Eligibility: candidates must hold a Bachelor's Degree in the corresponding field

Scholarship: scholarship covers the tuition fee, some study materials and includes the amount of additional payments for personal needs that varies from 3600 to 11000 RUR (from 60 to 190 USD) depending on the academic performance

An academic year: includes 2 semesters beginning on 1st September and 10th February, Winter holidays - 2 weeks, Summer holidays - 2 months (July, August). Master’s Thesis defense is in June

Career prospects: graduates, who have completed the Master's program " Automation and Mechatronics", are prepared for independent scientific and practical activities, to the development of software, mathematical and technical assistance for the creation of automatic and automated control systems. Therefore, after graduation, they are in demand at many enterprises, research and production firms and commercial structures... [-]


Master in Mechatronic Systems

Technical University of Ostrava
Campus 2 years September 2018 Czech Republic Ostrava

The aim of the study is to prepare graduates for research and development work, and design of mechatronic systems with applications in the various kinds of production and applied technologies. [+]

Branch Profile

The aim of the study is to prepare graduates for research and development work, and design of mechatronic systems with applications in the various kinds of production and applied technologies. Graduate profile includes methods for the integrated design of mechatronic systems which are composed from the mechanical and electronic subsystems, including actuators, sensors and control systems. Graduates are trained in computer aided modeling and computer simulation and design of control algorithms.

Key Learning Outcomes KNOWLEDGE

Graduates will have gained knowledge important for the design of mechatronic systems.

SKILLS

Graduates are able to analyse the dynamic properties of complex structured systems and use mathematical/physical modelling and simulation of dynamic systems. ... [-]


Master in Applied Mechanics

Technical University of Ostrava
Campus 2 years September 2018 Czech Republic Ostrava

The main emphasis in graduate education in the field of Applied Mechanics is on the readiness and ability to develop, elaborate and make practical use of modern computational and experimental approaches to solve technical problems. [+]

Branch Profile

Deeper knowledge of the core disciplines of mechanical engineering creates a broad basis for creative applications in engineering and other professional growth through various forms of lifelong learning. The main emphasis in graduate education in the field of Applied Mechanics is on the readiness and ability to develop, elaborate and make practical use of modern computational and experimental approaches to solve technical problems. Graduates will be able to perform static, kinematic and dynamic analysis of mechanisms and structures, to apply fracture mechanics in the assessment of limit states of components and structures, to assess the reliability and durability of machines and temperature loading, deal with technical tasks, flow dynamics and hydro-thermodynamic systems and heat and mass transfer. They will be able to exploit and further develop computer support in the design, planning and research activities for specific applications.... [-]


Master - Mechatronics And Robotics

Far Eastern Federal University
Campus 2 years September 2018 Russia Vladivostok

The program combines theoretical and practical training in the field of robotics and industrial automation in various sectors of the economy, automation of technological processes, planning systems and business management methods and means of computer control and automation of production, transport, dispatching and other systems. [+]

Program Overview

The program combines theoretical and practical training in the field of robotics and industrial automation in various sectors of the economy, automation of technological processes, planning systems and business management methods and means of computer control and automation of production, transport, dispatching and other systems.

The specifics of the program is to prepare in the framework of research and design activities of professionals in the field of mechatronic and robotic systems for various, including special purpose entities.

acquired competence compilation of mathematical models of mechatronic and robotic systems, subsystems, including the executive, information and sensor and control modules; use software packages for various purposes; Development and research of models of experimental control, information and execution units of mechatronic and robotic systems; and development of methodologies for conducting experiments on samples and current pilot mechatronic and robotic systems and subsystems; organization and conduct of scientific research; protecting the rights of intellectual property; participate in the development of design and project documentation mechatronic and robotic systems. Competitive advantages highly faculty; availability of modern laboratory and technological base for the educational process and scientific research; Partnership with research institutes of the Russian Academy of Sciences; joint research with universities in Russia (Moscow, St. Petersburg, Omsk, Krasnoyarsk), Europe (Germany, Austria, France, Italy), Asia-Pacific (South Korea, China, Japan, Taiwan); partnership leading industrial enterprises of the Far Eastern region; Membership in Russian and international scientific and technical communities; Implementation of training on the basis of scientific and educational center "Underwater Robotics"; participation in... [-]

Master's in Mechanics of Materials and Structures (MMS)

University of Girona
Campus 1 year September 2018 Spain Girona France Dijon United Kingdom Edinburgh + 3 more

The Masters in Mechanics of Materials and Structures is aimed at students who wish to develop their knowledge and skills in the field of the mechanical behaviour of materials and structures. [+]

The Masters in Mechanics of Materials and Structures is aimed at students who wish to develop their knowledge and skills in the field of the mechanical behaviour of materials and structures. Its objective is to link the current knowledge of theories of the behaviour of materials with the most innovative techniques in structural engineering. The proposed syllabus places special emphasis on computational techniques, materials mechanics, advanced structural design and experimental techniques. The masters provides students with the skills to understand the aims of the disciplines involved and with the capacity to design solutions to advanced problems in this field.

[-]

Master's Degree in Mechatronics

Johannes Kepler University Linz - JKU
Campus 4 semesters October 2018 Austria Linz

The study of Mechatronics – a combination of “mechanics” and “electronics” - combines mechanical engineering, electronic engineering and informatics. [+]

Master's Degree in Mechatronics

The study of Mechatronics – a combination of “mechanics” and “electronics” - combines mechanical engineering, electronic engineering and informatics. This interdisciplinary engineering field of study encompasses the collective area ranging from basic substructures, facilities and technology for development, to production and operations of future-oriented technical machinery, appliances and equipment. In the process, systems from technical components are combined with intelligent control systems.Mechatronics has increasingly changed our everyday lives with products and systems such as integrated ABS and EBS in automobiles, DVD and Blue-Ray Players, mobile communications with UMTS systems and video communications. Mechatronics is an essential catalyst for product innovation and the potential is growing more rapidly than ever before.... [-]