Part time Master's Degree in Mechanical Engineering in North America

Compare Part time Masters Programs in Mechanical Engineering in North America 2017

Mechanical Engineering

Master-level studies involve specialized study in a field of research or an area of professional practice. Earning a master’s degree demonstrates a higher level of mastery of the subject. Earning a master’s degree can take anywhere from a year to three or four years. Before you can graduate, you usually must write and defend a thesis, a long paper that is the culmination of your specialized research.

Mechanical engineers almost always need to have the ability to analyze and design objects and systems with motion. This includes small individual parts, like micro-sensors, and large complex machines, like control systems for airplanes and spacecraft.

The United States of America is located on the continent of North America. It is the third largest country by size in the world. It has a relatively short history compared to other world nations, has one of the world's largest economies, and has one of the world's most diverse populations.

Start Today Best Part time Master's Programs in Mechanical Engineering in North America 2017

Read More

15 Results in Mechanical Engineering, North America Filter

Mechanical Engineering

  1. Master
  2. Mechanical Engineering
:

Master Degrees

All (50) Master Degrees (15) Masters of Science (11)

North America

North America

Study type

All Campus Online

Part time

All Full time Part time

Master’s Degree in Mechanical Engineering

McGovern Education Group
Campus September 2017 USA Oklahoma City

A Master of Mechanical Engineering is a degree program that applies the principles of engineering, physics, and materials science for the design, analysis, manufacturing, and maintenance of mechanical systems. [+]

Top Part time Masters in Mechanical Engineering in North America. A Master of Mechanical Engineering is a degree program that applies the principles of engineering, physics, and materials science for the design, analysis, manufacturing, and maintenance of mechanical systems. It is the branch of engineering that involves the design, production, and operation of machinery. The BS in Mechanical Engineering degree requires an understanding of core areas including mechanics, kinematics, thermodynamics, materials science, structural analysis, and electricity. Mechanical engineers use these core principles along with tools like computer-aided design, and product lifecycle management to design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling systems, transport systems, aircraft, watercraft, robotics, medical devices, weapons, and others. Tuition for a Master’s degree in Mechanical Engineering starts at $28,000 USD per academic year, although international scholarships are available for highly qualified applicants. Questions? Would you like to speak with an American counselor about this degree program? We’re a team of American counselors who are trained to help international students find the ideal degree program at a respected American university at a tuition price you can afford. Did you know there are more than 4,000 colleges and universities in the United States? We partner with hundreds of safe, affordable, and respected American universities that offer ranked programs, international scholarships, and provide job placement services for graduates. We can fast track your application at hundreds of partner US universities. Our American counselors are waiting to provide unlimited one-on-one assistance at no cost. FREE degree... [-]

MEng in Mechanical Engineering

Northern Arizona University
Campus August 2017 USA Flagstaff

The Master of Engineering is a non-thesis professional degree, based primarily on course work and/or on an engineering project designed with the guidance of a faculty advisor to address a need or problem specific to their engineering field of study (Civil, Environmental, Electrical, or Mechanical Engineering). [+]

The Master of Engineering is a non-thesis professional degree, based primarily on course work and/or on an engineering project designed with the guidance of a faculty advisor to address a need or problem specific to their engineering field of study (Civil, Environmental, Electrical, or Mechanical Engineering). This degree program is designed to provide a broad, practice-based education. Student Learning Outcomes LO1. Demonstrate the ability to apply graduate level critical thinking skills to formulate and solve advanced mechanical engineering problems: Acquires knowledge on advanced contemporary engineering topics and computational tools specific to mechanical engineering. Develops the ability to identify, formulate, and solve relevant advanced mechanical engineering problems. Develops the ability to synthesize, explain, verify, and justify solutions to complex mechanical engineering problems. LO2. Demonstrate the ability to, independently and creatively, design, plan, and conduct complex mechanical engineering projects: Assesses the state of the art in the field of study. Applies, independently and creatively, appropriate engineering theories and tools towards developing a viable solution for the project. Designs and conducts activities specific to the project. LO3. Demonstrate the ability to communicate effectively the results of a comprehensive research project through oral presentations and publications. Creates a report reflecting the integration of knowledge acquired through the project. Delivers an oral presentation to peers summarizing the work performed on the project and its outcomes. Synthesizes and presents the relevance of the engineering project in both technical and non-technical terms. ADMISSIONS AND ENTRY The Master of Engineering (MEng) program offers a practice-oriented education that prepares... [-]

MEng in Civil Engineering

Northern Arizona University
Campus August 2017 USA Flagstaff

The Master of Engineering is a non-thesis professional degree, based primarily on course work and/or on an engineering project designed with the guidance of a faculty advisor to address a need or problem specific to their engineering field of study (Civil, Environmental, Electrical, or Mechanical Engineering). [+]

Top Part time Masters in Mechanical Engineering in North America. This degree provides you with a broad, practice-based education. Degree requirements To earn this degree, you must complete a total of 30 credit hours: applied mathematics course, in a relevant topic such as numerical methods, linear algebra, or statistical analysis (3 credit hours) engineering management course (3 credit hours) 24 credit hours from: general engineering, environmental engineering, civil engineering, mechanical engineering, or geology, selected with your committee’s approval (15 credit hours) elective courses (9 credit hours), which can include up to six credit hours in an optional practice-oriented project Admission information Applicants must select one primary emphasis in: civil engineering electrical engineering environmental engineering mechanical engineering computer science Prerequisites / Admission Requirements 1. You must have a B.S. degree in the discipline and an overall GPA of 3.0 or higher. If you have a B.S. degree in a different discipline from that of your master’s application, you must complete a pre-admission course of study while earning a grade of "B" or higher in all pre-admission courses. See the prerequisite link below for this information. 2. You must take the GRE General Test unless you earned your B.S. degree from NAU or are in our Integrated Program in the discipline of your master’s application. If you are an international applicant whose native language is not English, you must also submit TOEFL scores. 3. Your application must include a statement that includes your educational goals and top areas of interest for your... [-]

Master of Engineering: Mechanical-Aerospace

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

Windsor’s unique climate of co-operation between academic, business and industry sectors gives you access to state-of-the-art engineering facilities and outstanding career opportunities. [+]

Windsor’s unique climate of co-operation between academic, business and industry sectors gives you access to state-of-the-art engineering facilities and outstanding career opportunities. The Faculty of Engineering offers programs designed to develop professional competence and to prepare students to solve the technical problems of society and the global environment. Our departments include: Civil and Environmental Engineering Electrical and Computer Engineering Industrial and Manufacturing Systems Engineering Mechanical, Automotive & Materials Engineering On behalf of our entire Faculty, we'd like to welcome you! Whether you're a high school student trying to figure out what Engineering is all about, a potential graduate student considering advanced study through a Masters or Doctoral degree, a company or industry representative wondering if our university can assist you with a research problem, we're positive that the Faculty of Engineering here at the University of Windsor can help you. For those of you who are new to university, please browse our Faculty website to find out more about what Engineering is, what we can offer you, and if you can't find the information you need, please drop us a line. We certainly hope you will join us, ready to embark on a challenging and exciting journey of education. Engineering takes work, but it is work that is well rewarded. When you finish, you'll have a degree that can lead you to many places. For those of you who already have an undergraduate degree and wondering if you should further enhance your education, we say "yes!" The demands on professional... [-]

Master of Engineering: Mechanical-Materials

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. [+]

Top Part time Masters in Mechanical Engineering in North America. MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. Engineering Materials The Vision Statement for the Engineering Materials Graduate Program is: The Engineering Materials Graduate Program recognizes the close relationship between advanced level education and the advancement of knowledge, and is committed to excellence in graduate teaching and research. The Mission statement for the Engineering Materials Graduate Program is to provide an outstanding learning environment for productive graduate research to maintain state-of-the-art research laboratories equipped with the most modern research equipment to offer students with opportunities for a rewarding education to keep self-sustained growth by a high output of student co-authored peer-reviewed research publications, and strengthening collaborative research with other universities and industry to expose students to challenging industrial problems that are studied using a sound scientific methodology and experimental/theoretical research skills to prepare students for careers in teaching and/or research in academia or in industry to train students to acquire autonomy in conducting innovative research The Engineering Materials (EM) graduate program is fully accredited by the Council on Quality Assurance of Ontario Universities (previously, Ontario Council on Graduate Studies (OCGS)). The high caliber of the research activity within the Engineering Materials Program... [-]

Master of Engineering: Mechanical-Automotive Option

University of Windsor
Campus 3 semesters September 2017 Canada Windsor

The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. [+]

The objective of the Master of Engineering - Mechanical Engineering (Automotive Option) is to prepare graduates for leadership positions within the automotive industry. The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. At the University of Windsor, we strive to create an environment of learning, opportunity, and personal and professional growth. Our students go on to pursue careers in government, industry and at various universities across North America and the world. Our friendly and safe campus is ideal for learning about and becoming a part of the automotive industry. We are located on the Canada-United States border in the automotive and manufacturing heartland of North America. Our unique location means that we can offer our students opportunities for international study, research and work experience that no other university in Canada can match. Learn from the best The key to a great university education is the quality of its teaching and research done by its professors. At the University of Windsor, you will be interacting with world-class faculty conducting cutting-edge research in the automotive area. They will be your mentors as you prepare yourself for the careers of the future. You will combine what you learn in the classroom with practical application so that you are ready for the world of opportunities that will follow... [-]

Master of Engineering in Mechanical Engineering

University of Maryland, A. James Clark School of Engineering
Campus September 2017 USA College Park

Master of Engineering in Mechanical Engineering [+]

Top Part time Masters in Mechanical Engineering in North America. Admission Requirements: Full admission as a degree seeking student requires the following prerequisites: A bachelor's degree, GPA of 3.0 or better, in engineering; Civil and Environmental, Mechanical, Chemical and Biomolecular, from an accredited institution. Courses in mathematics (Calculus I, II, III, & Differential Equations), and Thermodynamics, Fluid Mechanics, and Heat Transfer are required to be considered for admission. Additional specific prerequisite requirement for specialization : General Mechanical: Strength of Materials/Structural Mechanics [-]

Master of Engineering in Reliability Engineering

University of Maryland, A. James Clark School of Engineering
Online & Campus Combined Part time September 2017 USA College Park

Master of Engineering in Reliability [+]

Admission Requirements: Full admission as a degree seeking student requires the following prerequisites: A bachelor's degree, GPA of 3.0 or better, in engineering or a closely related discipline; Computer Science, Physics, Applied Mathematics, or Physical Sciences from an accredited institution. Courses in mathematics (Calculus I, II, III, & Differential Equations) are required to be considered for admission. Further admissions requirements. Completed applications are reviewed and considered for admission on a case-by-case basis. [-]

Master of Engineering in Mechanical Engineering

Rochester Institute of Technology (RIT)
Campus Part time 2 years September 2017 USA Rochester

This is a post-baccalaureate internship program leading to the professional degree of master of engineering. The objective of the program is to provide the engineering BS graduate the means for earning a terminal master’s degree. [+]

Master of Engineering in Mechanical Engineering is a post-baccalaureate internship program leading to the professional degree of master of engineering. The objective of the program is to provide the engineering BS graduate the means for earning a terminal master’s degree. The capstone experience for the master of engineering degree may be a course design project, a well-organized and carefully chosen industrial internship, or an independent study project in place of the conventional thesis requirement of an MS degree. This master’s degree is particularly well-suited to students who wish to study part time, those interested in updating their technical skills, and those not focused on a research-oriented master of science thesis.The program consists of core courses (12 credit hours), concentration courses (16 credit hours), and elective courses (20 credit hours).... [-]

Master of Engineering in Mechanical Engineering

Arkansas Tech University
Campus 1 year August 2018 USA Russellville

The department of Mechanical Engineering takes an interdisciplinary approach to maximize the students success through a mixture of cutting-edge research, diversified coursework, and world class faculty. The department is continuously growing and has maintained a consistent leadership as one of the top Mechanical Engineering programs in the state of Arkansas. [+]

Thank you for your interest in the Master's degree program in Mechanical Engineering at Arkansas Tech University. The department of Mechanical Engineering takes an interdisciplinary approach to maximize the students success through a mixture of cutting-edge research, diversified coursework, and world class faculty. The department is continuously growing and has maintained a consistent leadership as one of the top Mechanical Engineering programs in the state of Arkansas. As a new Mechanical Engineering Master's student, you have two program options: coursework and research project. The program requires 36 course credits for completion, and it gives the students the flexibility to select a degree plan that is customized to their goals. Student’s success is the prime goal of the department and we strive to provide the best opportunities for growth and professional development of our students. Unconditional Admission Students are eligible to apply for unconditional admission to the Master of Engineering degree program if they have: Applicants must meet the admission requirements for the Graduate College. ... [-]

Specialized Graduate Studies In Engineering (project Type)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski Lévis

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

Top Part time Masters in Mechanical Engineering in North America. The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and... [-]

Specialized Graduate Studies In Engineering (model Course)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski Lévis

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and to increase their skills in various fields of engineering and... [-]

Master Of Engineering (type Course With Project)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski Lévis

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. [+]

Top Part time Masters in Mechanical Engineering in North America. The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization,... [-]

Master Of Engineering (with Memory)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski Lévis

The master of engineering is to improve scientific and technical knowledge in engineering, [+]

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance and management of industrial systems Telecommunications and information... [-]

M.S. in Mechanical Engineering

Youngstown State University (YSU)
Campus July 2017 USA Youngstown

The Mechanical Engineering graduate program in the Department of Mechanical & Industrial Engineering at Youngstown State University leads to a Master of Science degree with opportunities in a wide variety of engineering and science fields. The program seeks to develop the qualities of engineering problem solving skills, and independent and creative thinking, with a goal of preparing students for successful careers in mechanical engineering disciplines. Specializations are available in the areas of solid mechanics, design, thermo-fluids, manufacturing, and materials. [+]

Top Part time Masters in Mechanical Engineering in North America. The Mechanical Engineering graduate program in the Department of Mechanical & Industrial Engineering at Youngstown State University leads to a Master of Science degree with opportunities in a wide variety of engineering and science fields. The program seeks to develop the qualities of engineering problem solving skills, and independent and creative thinking, with a goal of preparing students for successful careers in mechanical engineering disciplines. Specializations are available in the areas of solid mechanics, design, thermo-fluids, manufacturing, and materials. Students may pursue the M.S. Degree in Mechanical Engineering in one of three planes. The Thesis Plan is a research-oriented program and is strongly recommended for candidates who wish to specialize in a particular mechanical engineering area or/and wish to continue their graduate studies beyond the master’s degree. The Non-thesis Plan allows students to enhance their knowledge and skills to succeed in careers as practicing engineers, and gain experience in working on, writing, and presenting a graduate project. The third option is Management Plan. This plan is recommended to the students who have been in the work arena and are moving into an engineering management role. The Department of Mechanical & Industrial Engineering has excellent computer and laboratory facilities that provide for the following design and research capabilities: solid modeling; FEA in stress analysis; structural dynamics, and heat transfer; experimental stress analysis; vibrations and noise control; computational and experimental heat transfer and fluid dynamics; advanced machine design; additive manufacturing, and advanced... [-]