Part time Master's Degree in Mechatronics

Find Part time Masters Programs in Mechatronics 2017

Mechatronics

Master-level studies involve specialized study in a field of research or an area of professional practice. Earning a master’s degree demonstrates a higher level of mastery of the subject. Earning a master’s degree can take anywhere from a year to three or four years. Before you can graduate, you usually must write and defend a thesis, a long paper that is the culmination of your specialized research.

Education in mechatronics involves study and research in a wide variety of laboratories. Specialized laboratories for robotics, microprocessor systems, control systems, and sustainable energy are often utilized. CAD/CAM systems and multimedia computer equipment are also used in mechatronics education.

Request Information Part time Masters Degrees in Mechatronics 2017

Read More

Master in Simulation Based Engineering Sciences – Applied Computational Mechanics

esocaet Studies by CADFEM
Online & Campus Combined Part time 4 semesters October 2017 Germany Landshut Ingolstadt Grafing + 2 more

Since 2005 many engineers and scientists have been successfully studying through the part-time master’s degree program Simulation-based Engineering Sciences (SBES), focusing on Applied Computational Mechanics. [+]

Best Part time Masters in Mechatronics 2017. Program Overview 2005 marked the first time the part-time master’s degree program Applied Computational Mechanics was offered jointly by the universities of applied sciences Landshut and Ingolstadt as well as CADFEM. Since then many engineers and scientists have been successfully studying through the part-time master’s degree program Simulation-based Engineering Sciences (SBES), focusing on Applied Computational Mechanics. Possible Degrees Master’s (M.Eng., 90 ECTS-credits) Module studies Recognition of competencies, that participants already acquire at work Yearly program starts in September. Those with specific background knowledge may have the possibility to enroll later. Flexible Scheduling: Master’s degrees usually take four semesters to complete. With a reduced course-load it will take longer. Comprehensive combination of modules as needed Experienced professors from different universities and from industry The language of instruction is EnglishLifelong learning: Even after degree completion, you can take module coursework. Participant Group The ideal candidates are college graduates, who have already collected professional experience in engineering or science, and who are interested in a professional or managerial career in the field of product development with a focus on simulation. Since the study is supervised individually, it also takes into account the interests of newcomers as well as experienced professionals who wish to transfer from other applications. Thus, the offer is also open to professionals who have been contemplating a diploma, bachelor's, master's or even a doctoral degree. Module Course Offerings Structure Mechanics Solid Mechanics* Finite Element Method* Geometrical Nonlinear and Contact Analysis* Materials and Material... [-]

Master’s degree in Mechanical Engineering ( taught in Italian )

University Of Bergamo
Campus October 2017 Italy Bergamo

Aim of the course is to provide students with in-depth knowledge on: design and management of industrial production systems; structural and functional design; materials and relevant working technologies; ... [+]

EDUCATIONAL OBJECTIVES Aim of the course is to provide students with in-depth knowledge on: design and management of industrial production systems structural and functional design materials and relevant working technologies modelling and analysis of products and processes life-cycle design and management of plants for energy conversion. Moreover, students can deepen still further some specific topics concerning: energy, biomedical engineering, mechatronics, production, design. JOB OPPORTUNITIES The postgraduate students can be employed in several industrial fields: mechanical and electro-mechanical industry energy production and conversion plants' design, installation and testing maintenance and management of machines, production lines, complex systems. Typical assignments for a postgraduate Mechanical Engineer are: design of complex devices and systems production management maintenance and management of machines, production lines and production departments. ADMISSION A Three-Year First level Degree or equivalent. ENTRY TESTS Individual interview. [-]

Master in Mechatronics and Sensor Systems Technology

Vietnamese-German University
Campus 2 years September 2017 Vietnam Ho Chi Minh City

From touch screens and cameras in mobile phones to highly automated robots in modern production facilities: it is obvious that sensors and their applications have become a key part of technology in engineering. [+]

Master in Mechatronics and Sensor Systems Technology

Mechatronics and Sensor Systems Technology (MSST) is a full-time two-year (4 Semester) Master's Program offered at VGU by the Hochschule Karlsruhe - University of Applied Science, Germany.The language of instruction is English.

Why this program?

From touch screens and cameras in mobile phones to highly automated robots in modern production facilities: it is obvious that sensors and their applications have become a key part of technology in engineering.

According to the current development, a major part of the prospective growth in this industry will be in Asia. Siemens, Bosch or Intel: many companies have just started to shift their production and research facilities to Vietnam and there is already a shortage of highly trained professionals. This is a good reason to participate in the career possibilities. In close cooperation with the industry, MSST responds to the demands of the job market and provides superior graduates to create the technology of tomorrow. This program opens up excellent job and research opportunities for students in many branches of this industry like microelectronics, automotive, environmental technologies or automation.... [-]


Faculty of Engineering

Enugu State University of Science and Technology - ESUT
Campus March 2018 Nigeria Enugu

The Department of Civil Engineering offers graduate courses leading to the award of Postgraduate Diploma (PGD) in Civil Engineering; Masters of Engineering (M.Eng) in Structures and Geotechnical Engineering; and Doctor of Philosophy (Ph.D) in Structures and Geotechnical Engineering degrees. [+]

Faculty of Engineering Agricultural & Bioresource Engineering Admission Requirement: Applicants will normally be accepted under the general regulation of the school of Post-graduate studies. 1.Postgraduate Diploma: Applicant should posses HND in Agric Engineering or related field with a minimum CGPA of 2.5 on 5 point scale and 2.0 on 4 point scale, a minimum of pass degree in agricultural Engineering, agricultural mechanization and other engineering disciplines in ESUT or from any recognized university. 2.Masters Degree: Applicant for the M.Eng degree must have normally received at least a good second class honour degree in Agricultural Engineering at ESUT or any recognized University. 3.Doctorate Degree: The admission requirement for the Ph.D program is a good M.Eng or M.Sc degree in Agricultural Engineering. Programme Requirement 1.Postgraduate Diploma: The programme is by course work and a research project. The course work may include undergraduate course for students who are deficient. Every candidate is required to register full time and shall pass all the courses required for the programme as presented in the list of PGD courses below. 2.Masters Degree: The programme is done by course work of a minimum of 27 credit hours in addition to research work to be presented in a project report. Candidates may register for full-time or part-time study. 3.Doctorate Degree: The programme is done by comprehensive research work to be embodied in a written thesis. The research work is supplemented with course-work of a minimum of 12 credit hours. The result of the research findings is to be reported... [-]

Master in Automation and Mechatronics

Saint Petersburg Electrotechnical University
Campus 2 years September 2017 Russia St. Petersburg

The structure of the degree program consists of advanced professional studies, elective courses and Master’s Thesis. [+]

Best Part time Masters in Mechatronics 2017. Saint Petersburg Electrotechnical University "LETI" is one of the most prestigious and oldest universities in Russia with multi-applied study and research areas. The university is included in the governmental «TOP 100 Leading Universities in the world» program. The structure of the degree program consists of advanced professional studies, elective courses and Master’s Thesis. The program provides students with a broad knowledge and skills in the field of automation of production processes and equipment, as well as in the field of mechatronic devices and systems control.Study of network technologies (Intranet- and of Internet-technologies), issues of SCADA-systems construction, practical use of real-time systems are important parts of the program.Students learn the principles of robotics and mechatronics, mechatronic and robotic actuators, modern technologies of microcontroller application.The program gives students a deep theoretical knowledge of modern methods of automatic control theory, in particular the methods of analysis and design of nonlinear, adaptive and intelligent control systems. Program curriculum includes the following advanced courses: Methodology and research logic; Modern problems of control theory; Non-linear, adaptive and intelligent control systems; The electrical and hydraulic actuators of mechatronic and robotic systems; Systems of ensuring a safety for technical control devices; Computer control technology in technical systems. Mastering computer technology is carried out in a laboratory-based, consisting of a research laboratory stands, equipped with the latest generation of industrial controllers and InfinitySuite SCADA-system. Programme: 120 ECTS credits, full-time study (2 years), Master’s Degree Eligibility: candidates must hold a Bachelor's Degree in... [-]

Master of Engineering in Mechanical Engineering

University of Maryland, A. James Clark School of Engineering
Campus September 2017 USA College Park

Master of Engineering in Mechanical Engineering [+]

Admission Requirements: Full admission as a degree seeking student requires the following prerequisites: A bachelor's degree, GPA of 3.0 or better, in engineering; Civil and Environmental, Mechanical, Chemical and Biomolecular, from an accredited institution. Courses in mathematics (Calculus I, II, III, & Differential Equations), and Thermodynamics, Fluid Mechanics, and Heat Transfer are required to be considered for admission. Additional specific prerequisite requirement for specialization : General Mechanical: Strength of Materials/Structural Mechanics [-]

Master in Mechatronics Systems (Lappeenranta University of Technology)

Samara National Research University
Campus 2 years September 2017 Russia Samara

The Master’s programme “Mechatronics Systems”, within course 24.04.05 “Aircraft Engines”, was created together with one of the leading universities in Finland, Lappeenranta University of Technology (LUT). [+]

Best Part time Masters in Mechatronics 2017. The Master’s programme “Mechatronics Systems”, within course 24.04.05 “Aircraft Engines”, was created together with one of the leading universities in Finland, Lappeenranta University of Technology (LUT). The students have the unique opportunity of borrowing the experience not only of Russian, but also foreign specialists in the field of building mechatronics systems and receiving education of the highest level, confirmed simultaneously with two diplomas, Russian and European. The programme graduates receive not only deep theoretical knowledge, but also broad practical skills in automatic control systems, commercial pneumatic and hydraulic units, and mechatronics systems. The students study theory without separation from practice, which is supported by multiple laboratory equipment units, created on the basis of modern commercial models. The graduates in this academic programme are in demand both by Russian enterprises and foreign companies working with automation and mechatronics. Brief characterisation of the programme The programme prepares high-class specialists who have deep theoretical knowledge and practical skills in automatic control systems, commercial pneumatic and hydraulic units and mechatronics systems. After completing this specialty, the professional abilities received by the students allow them to be achievers in various types of activity: research; organisational; production-manufacturing; design; experimental. The programme emphasises special disciplines in the fields of automation, mechatronics, dynamics and strength, design of pneumatic and hydraulic system units, as well as the design fundamentals of aviation engine control systems. Studies are conducted by Candidates and Doctors of Science with extensive teaching, production and research experience using multimedia... [-]

Master of Science in Electromechanical Engineering Technology

KU Leuven - University of Leuven
Campus 1 year September 2017 Belgium Leuven

The cornerstones of this programme are mechanical design and energy conversion. The former starts with an idea that is shaped in a graphical design and results in a finished product through choice of materials, simulation and production technique. Energy conversion is aimed at all aspects of energy efficiency in this process and ranges in practice from electrical controls and automation to thermal power plants, combustion engines, climatisation, etc. [+]

The cornerstones of this programme are mechanical design and energy conversion. The former starts with an idea that is shaped in a graphical design and results in a finished product through choice of materials, simulation and production technique. Energy conversion is aimed at all aspects of energy efficiency in this process and ranges in practice from electrical controls and automation to thermal power plants, combustion engines, climatisation, etc. Intelligent Manufacturing option The issues covered in this option include the latest production techniques; the way production systems operate; and the intrinsic relationship between production and other business processes, especially the design process. At the core of this option are the possibilities that computer-based systems offer in this context. Moreover, you learn to factor in the tension between technology, economics, and the environment and ergonomics. Intelligent Mechanics option The option Intelligent Mechanics relates to designing, developing and optimising automated mechanical machines. Based on a strong background in electricity and mechanics, you delve more deeply into aspects like advanced design methods, electronic operations, controls, measures and drives, data communication and visualisation methods. Intelligent Mobility option Intelligent Mobility deals with the sustainable application of smart solutions. Its application area is very broad, but examples include: fitting electric or hybrid cars with intelligent recharging systems and designing vehicles that can warn each other about accidents or traffic jams. Intelligent Mobility also has to do with choosing materials or production methods that have the smallest ecological impact possible, and optimally syncing transportation systems to one another.... [-]

Master Of Engineering (with Memory)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski Lévis

The master of engineering is to improve scientific and technical knowledge in engineering, [+]

Best Part time Masters in Mechatronics 2017. The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance and... [-]

Masters Programme in Mechanical Engineering

Sapienza University of Rome
Campus 2 years October 2017 Italy Rome

The Master of Science in Mechanical Engineering aims at training young engineers with an advanced education, providing them with skills in designing, planning and managing complex activities of research and development in an industrial environment. This goal is achieved by means of a broad training proposal based on advanced mathematics and physics, [+]

The Master of Science in Mechanical Engineering aims at training young engineers with an advanced education, providing them with skills in designing, planning and managing complex activities of research and development in an industrial environment. This goal is achieved by means of a broad training proposal based on advanced mathematics and physics, and professional expertise targeted to the solution of complex engineering problems concerning design of processes, plants, systems, devices, machines. Engineering Design professionals educated at Sapienza can work as technology specialists in a wide range of fields, including manufacturing, mechatronic, transportation (automotive, naval, aeronautical and railroad), conventional and renewable energy production, biomechanics and many others. In these settings mechanical engineers are responsible for design, testing, manage, research and development services. The present Mechanical Engineering Course keeps the educational spirit and objectives since the origin of Mechanical Engineering in the most modern sense, during the industrial revolution in the eighteenth century. This continuity to the tradition is combined with the innovation in the didactic approaches, designed to transfer the research know-how of the academic staff in a continuous improvement of teaching experiences and methodologies. Becoming a “Mechanical Engineer” still gives an education of international relevance, and studying in Rome warrants the possibility of living a vivid industry-related cultural experience. [-]

Master in Industrial Mechanical Engineering

Free University of Bozen - Bolzano
Campus 2 years October 2017 Italy Bolzano

The aim of this two-year programme is to provide students with solid knowledge about mechanical engineering (mechanical design, production and plant maintenance, logistics and production planning, etc.) and its related fields. [+]

Best Part time Masters in Mechatronics 2017. The aim of this two-year programme is to provide students with solid knowledge about mechanical engineering (mechanical design, production and plant maintenance, logistics and production planning, etc.) and its related fields. To this end, the course aims to form a modern mechanical engineer, able to integrate traditionally separated specialized fields, such as the mechanical design, mechatronics, automation, management and logistics ones. The degree course splits into two different branches in which students can specialize: “Mechanics and Automation” and “Logistics and Production”. Short description of the international Study Program The Master has been established at the Faculty of Science and Technology of the Free University of Bolzano (unibz). The Master is offered singularly from the Free University of Bolzano and has an international character. The path “Logistics and Production” is offered in collaboration with the Otto-von Guericke University of Magdeburg (OvGU) and allows obtaining a "double degree". Careers opportunities Graduates can expect to work in the industrial sectors in the following company’s functions: research and development, design, procurement, production, operational management, internal and external logistics and quality assurance. As well as for pursuing freelance careers as consultants, the course provides the students with the tools for working for companies in the manufacturing, mechanical and mechatronic, energy production and conversion, automation and robotic industries or in the public administration. The graduates’ activities will be directed toward designing and producing instruments, engines, machines and other mechanical equipment and/or managing materials procurement, operations management and logistics. [-]

Master - Mechatronics And Robotics

Far Eastern Federal University
Campus 2 years September 2017 Russia Vladivostok

The program combines theoretical and practical training in the field of robotics and industrial automation in various sectors of the economy, automation of technological processes, planning systems and business management methods and means of computer control and automation of production, transport, dispatching and other systems. [+]

Program Overview The program combines theoretical and practical training in the field of robotics and industrial automation in various sectors of the economy, automation of technological processes, planning systems and business management methods and means of computer control and automation of production, transport, dispatching and other systems. The specifics of the program is to prepare in the framework of research and design activities of professionals in the field of mechatronic and robotic systems for various, including special purpose entities. acquired competence compilation of mathematical models of mechatronic and robotic systems, subsystems, including the executive, information and sensor and control modules; use software packages for various purposes; Development and research of models of experimental control, information and execution units of mechatronic and robotic systems; and development of methodologies for conducting experiments on samples and current pilot mechatronic and robotic systems and subsystems; organization and conduct of scientific research; protecting the rights of intellectual property; participate in the development of design and project documentation mechatronic and robotic systems. Competitive advantages highly faculty; availability of modern laboratory and technological base for the educational process and scientific research; Partnership with research institutes of the Russian Academy of Sciences; joint research with universities in Russia (Moscow, St. Petersburg, Omsk, Krasnoyarsk), Europe (Germany, Austria, France, Italy), Asia-Pacific (South Korea, China, Japan, Taiwan); partnership leading industrial enterprises of the Far Eastern region; Membership in Russian and international scientific and technical communities; Implementation of training on the basis of scientific and educational center "Underwater Robotics"; participation in the... [-]

MEng in Civil Engineering

Northern Arizona University
Campus August 2017 USA Flagstaff

The Master of Engineering is a non-thesis professional degree, based primarily on course work and/or on an engineering project designed with the guidance of a faculty advisor to address a need or problem specific to their engineering field of study (Civil, Environmental, Electrical, or Mechanical Engineering). [+]

Best Part time Masters in Mechatronics 2017. This degree provides you with a broad, practice-based education. Degree requirements To earn this degree, you must complete a total of 30 credit hours: applied mathematics course, in a relevant topic such as numerical methods, linear algebra, or statistical analysis (3 credit hours) engineering management course (3 credit hours) 24 credit hours from: general engineering, environmental engineering, civil engineering, mechanical engineering, or geology, selected with your committee’s approval (15 credit hours) elective courses (9 credit hours), which can include up to six credit hours in an optional practice-oriented project Admission information Applicants must select one primary emphasis in: civil engineering electrical engineering environmental engineering mechanical engineering computer science Prerequisites / Admission Requirements 1. You must have a B.S. degree in the discipline and an overall GPA of 3.0 or higher. If you have a B.S. degree in a different discipline from that of your master’s application, you must complete a pre-admission course of study while earning a grade of "B" or higher in all pre-admission courses. See the prerequisite link below for this information. 2. You must take the GRE General Test unless you earned your B.S. degree from NAU or are in our Integrated Program in the discipline of your master’s application. If you are an international applicant whose native language is not English, you must also submit TOEFL scores. 3. Your application must include a statement that includes your educational goals and top areas of interest for your study and/or research.... [-]

Master's Degree In Mechatronics

Universidade de Évora
Campus 2 years October 2017 Portugal Évora

The second cycle in Mechatronics Engineering aims to empower its students with 3 skill levels. [+]

PRESENTATION The second cycle in Mechatronics Engineering aims to empower its students with 3 skill levels: general 1.Competências - Professionalism in Engineering, ability to work in team and leadership; reading ability and comprehension of scientific and technical articles; capacity analysis results; ability to propose new original solutions in the context of development or research; capacity utilization acquired knowledge for solving complex and unfamiliar problems in multidisciplinary contexts; specific 2.Competências - ability to use advanced mathematical methods in the design and design of new Mechatronic equipment; enabling the development of Mechatronic equipment; ability to create and modify simulation software; capacity development and implementation of automated systems for the manufacture or testing of industrial products (integration of different technologies, pneumatics, electronics, machine vision); ability to prepare the planning of the manufacture of new products. 3.Competências professionals - development of professional activity in the design industries, manufacture and assembly of products and mechanical and electronic components, including the automobile and its sub-suppliers, automation companies, enterprises or maintenance departments, consulting firms and certification services and inspection, technical and commercial activities and research and design activity in research laboratories. Careers automated industries (Automotive, Food, components, Renewable Energy); Metalworking Industry (Mechanical Production, Mechanical and Mechatronic Systems Engineering); Consulting Technical / Scientific industrial enterprises; Industry automation and simulation software; research and development units (ID) in Mechatronic equipment. [-]

Master in Opto-Mechatronics Engineering

National Central University
Campus September 2017 Taiwan Taoyuan

Besides knowledge-based courses, the hands-on activities, the cultivation of creativity, and the capstone courses are specially offered in our training. [+]

Best Part time Masters in Mechatronics 2017. Teaching Characteristics Besides knowledge-based courses, the hands-on activities, the cultivation of creativity, and the capstone courses are specially offered in our training. Arranging undergraduate students to go to Hiroshima University, Southeastern University to have international academic interactions. Double degree program with famous universities in the world. Research Characteristics Main research fields: Energy Technology, Solid Mechanics/Design, Advanced Materials, Precision Manufacturing, Thermal Fluids, System Engineering/Automatic Control, Opto-mechatronic Engineering, Electromechanical Integration. Large research projects: Design of the IC/PV/LED manufacturing equipment, Energy storage, Fuel cells, Clean coal technology, CO2 capture, Wind power systems, Energy saving , Taiwan-Russia satellite. The average research budget from 2008 to 2010 was 0.099 billion NT dollars per year. Each teacher publishes 2.7 pieces of SCI/SSCI publication per year. Professional Core Courses: Elasticity, Mechanical Vibrations, Advance applied Mathematics, Advance Fluid Mechanics, Physical Metallurgy, Finite Element Method Requirements for Graduation Required credits : 24 credits (including “Graduate Seminar” course for 3 semesters) Duration of Study : 1~4 years Other requirements : Pass an oral defense of thesis. Elective Courses Research Facilities & Labs IC and PV Industrial Equipment Design Program Energy Storage Program Satellite/Rocket Engineering MOCVD Design Center Electrical Discharge Machining Laboratory Biomass Gasification/ Pyrolysis System Laboratory Admission Documents Autobiography Study Plan Research Proposal Two Letters of Recommendation TOEFL or Other Evidence of English Proficiency Evidence of Chinese Proficiency Related Academic Publications [-]