Part time Master's Degree in Industrial Engineering

Compare Part time Masters Programs in Industrial Engineering 2017

A Masters degree gives you the opportunity to either further your understanding of a particular question or take off in a completely different way using skills you have gained from your previous undergraduate degree.

Request Information Part time Masters Degrees in Industrial Engineering 2017

Read More

Master's Degree In Agronomic Engineering

Universidade de Évora
Campus 2 years October 2017 Portugal Évora

This training complements the agronomic training and related 1st cycle, introducing more materials related to engineering applied to Agricultural Sciences, and Agricultural Hydraulics and Rural Buildings and deepening more agricultural materials in the areas of Horto-fruit growing, Plant Protection and Biotechnology. [+]

Best Part time Masters in Industrial Engineering 2017. PRESENTATION This training complements the agronomic training and related 1st cycle, introducing more materials related to engineering applied to Agricultural Sciences, and Agricultural Hydraulics and Rural Buildings and deepening more agricultural materials in the areas of Horto-fruit growing, Plant Protection and Biotechnology. The student will be well prepared to understand the technological and environmental problems that present themselves to the modernization of agriculture, being able to study, design, promote and direct the implementation of systems and activities that constitute the best solutions for an agricultural activity success. Careers Technical farms; service and project companies in the agricultural sector; State agencies linked to agriculture; Agencies Scientific and Technological Research; agricultural education (technical, vocational and higher). [-]

Master's Degree In Mechatronics

Universidade de Évora
Campus 2 years October 2017 Portugal Évora

The second cycle in Mechatronics Engineering aims to empower its students with 3 skill levels. [+]

PRESENTATION The second cycle in Mechatronics Engineering aims to empower its students with 3 skill levels: general 1.Competências - Professionalism in Engineering, ability to work in team and leadership; reading ability and comprehension of scientific and technical articles; capacity analysis results; ability to propose new original solutions in the context of development or research; capacity utilization acquired knowledge for solving complex and unfamiliar problems in multidisciplinary contexts; specific 2.Competências - ability to use advanced mathematical methods in the design and design of new Mechatronic equipment; enabling the development of Mechatronic equipment; ability to create and modify simulation software; capacity development and implementation of automated systems for the manufacture or testing of industrial products (integration of different technologies, pneumatics, electronics, machine vision); ability to prepare the planning of the manufacture of new products. 3.Competências professionals - development of professional activity in the design industries, manufacture and assembly of products and mechanical and electronic components, including the automobile and its sub-suppliers, automation companies, enterprises or maintenance departments, consulting firms and certification services and inspection, technical and commercial activities and research and design activity in research laboratories. Careers automated industries (Automotive, Food, components, Renewable Energy); Metalworking Industry (Mechanical Production, Mechanical and Mechatronic Systems Engineering); Consulting Technical / Scientific industrial enterprises; Industry automation and simulation software; research and development units (ID) in Mechatronic equipment. [-]

Mechanical Engineering - Faculty Of Engineering

Universidad Privada De Ciencias Aplicadas
Campus March 2018 Peru Lima

Behind every great company or organization there is a strategist directing its operations, a leader who was able to focus on a goal and chart the best way to reach it. Someone who designed, with creativity and technique, tools, resources and systems were needed to achieve success. [+]

Best Part time Masters in Industrial Engineering 2017. Behind every great company or organization there is a strategist directing its operations, a leader who was able to focus on a goal and chart the best way to reach it. Someone who designed, with creativity and technique, tools, resources and systems were needed to achieve success. UPC formed in industrial engineers committed to the requirement, because we believe that the only way they can fulfill orders that industry and society will demand. Professionals who conceive and put in place systems of production of goods and services high impact that improve the quality of life for all. Our promise is continued excellence. To do this, you will learn hand expert teachers of recognized professional and teaching career. In addition, you will work on projects together with renowned companies application. We support the development of your skills so that you become an expert of great vision. We invite you to review the different careers offered by the Faculty of Business at the following link: http://pregrado.upc.edu.pe/facultad-de-ingenieria/ [-]

MPhil in Industrial Engineering and Logistics Management (Energy Technology Concentration)

The Hong Kong University of Science and Technology
Campus Part time 2 years September 2017 Hong Kong

The interdisciplinary postgraduate research program in Energy Technology in the School of Engineering at the Hong Kong University of Science and Technology provides long-term support to our ongoing educational training and fast-developing research in technology in general. The MPhil focuses on strengthening students’ knowledge in their chosen area of concentration, and training for engineering research and development. [+]

The world economy has been undergoing a rapid transformation from a capital intensive age to a knowledge-based age. The entire Asia-Pacific region is endeavoring to nurture businesses to meet the challenges of this transformation. Joining the Department of Industrial Engineering and Logistics Management as a postgraduate student gives you the opportunity to gain a comprehensive grasp of both technological and managerial aspects of contemporary issues in this field and to make a contribution to progress in driving the world forward by improving technology management and operations management. Industrial engineers are uniquely trained from the total system perspective to practice as system integrators, cross-functional trainers, and change facilitators. In addition to engineering training, Industrial Engineering and Logistics Management (IELM) also emphasizes strategic issues, integration, and customer-orientation. The MPhil focuses on strengthening students’ knowledge in their chosen area of concentration, and training for engineering research and development. The program is highly suited to individuals who aspire to take a leading technical role in high value-added business organizations. Research Foci The Department covers two main research areas: Design and manufacturing systems Product and service design, quality management, human factors and ergonomics, biomechanics and cognitive decisions, and service system engineering. Logistics management and Operations Management Logistics and supply chain management, dynamic pricing and revenue management, operations research and stochastic modeling, financial engineering and risk management, and service operations management. Energy Technology Concentration Energy has been considered a core research area within the broadly-based disciplines of environmental science and technology. It is one of the... [-]

MPhil in Industrial Engineering and Logistics Management

The Hong Kong University of Science and Technology
Campus Part time 2 years September 2017 Hong Kong

The MPhil focuses on strengthening students’ knowledge in their chosen area of concentration, and training for engineering research and development. The program is highly suited to individuals who aspire to take a leading technical role in high value-added business organizations. [+]

Best Part time Masters in Industrial Engineering 2017. The world economy has been undergoing a rapid transformation from a capital intensive age to a knowledge-based age. The entire Asia-Pacific region is endeavoring to nurture businesses to meet the challenges of this transformation. Joining the Department of Industrial Engineering and Logistics Management as a postgraduate student gives you the opportunity to gain a comprehensive grasp of both technological and managerial aspects of contemporary issues in this field and to make a contribution to progress in driving the world forward by improving technology management and operations management. Industrial engineers are uniquely trained from the total system perspective to practice as system integrators, cross-functional trainers, and change facilitators. In addition to engineering training, Industrial Engineering and Logistics Management (IELM) also emphasizes strategic issues, integration, and customer-orientation. The MPhil focuses on strengthening students’ knowledge in their chosen area of concentration, and training for engineering research and development. The program is highly suited to individuals who aspire to take a leading technical role in high value-added business organizations. Research Foci The Department covers two main research areas: Design and manufacturing systems Product and service design, quality management, human factors and ergonomics, biomechanics and cognitive decisions, and service system engineering. Logistics management and Operations Management Logistics and supply chain management, dynamic pricing and revenue management, operations research and stochastic modeling, financial engineering and risk management, and service operations management. Admission Requirements i. General Admission Requirements Applicants seeking admission to a master's degree should have: obtained a... [-]

Master In Industrial Engineering

Robert Schuman College
Campus 2 years September 2017 Belgium Libramont

The Engineer is involved in the resolution of major technological and environmental challenges of tomorrow. He seeks technological solutions to modern societal problems such as global warming, health, mobility and energy. It manages both the design and industrial production. [+]

Industrial Engineer (3 years + 2 years Master) The Engineer is involved in the resolution of major technological and environmental challenges of tomorrow. He seeks technological solutions to modern societal problems such as global warming, health, mobility and energy. It manages both the design and industrial production. Choose your engineer is choose your player in the evolution of our society. The three years of Industrial Science Bachelor is the first cycle of a higher education university type long. This cycle leads to the Master in industrial engineering with a two-year term. Competences During the master cycle, the future engineer: acquires knowledge about the "state of the art" and addresses technical, scientific and organizational; search for solutions by focusing as compared to learning the recipes; developing a general culture oriented towards human, social and economic role played by the engineer in society; is aware of the various aspects of quality. company visits and the organization of seminars led by experts from the world of work complete this training focused on the future. market outlets After graduation, the industrial engineer will ... holding positions in production: production engineer, quality manager, project manager ...; become office engineer; become conductive sites; hold a position in technical sales; exercise the teaching profession; hold positions in the company's management; conduct research; his education through possible bridges, different for different purposes (physical sciences, space sciences, civil engineering, science and environmental management ...). [-]

Master's Degree in Structural Engineering

Gheorghe Asachi Technical University Of Iasi
Campus 2 years October 2017 Romania Iasi

Master Program “Structural Engineering” is a modern interdisciplinary study program offered at the Faculty of Civil Engineering since 2005-2006, the first master program taught in English in field of Civil Engineering from Romania. [+]

Best Part time Masters in Industrial Engineering 2017. In brief Faculty Name: Faculty of Civil Engineering and Building Services Study domain: Civil Engineering Name of the university programme: Structural Engineering Language of instruction: This study programme is offered both in English and Romanian. Type of studies (full time, part time, distance learning): Full time Standard length of studies (in years) & number of semesters: 2 years / 4 semesters Number of ECTS Credits (on semester and on length of studies): 30 credits / semester, 120 credits in total Academic calendar (starting and ending dates of the courses): October 1st – June 30th. Extended to September 30th for re-examinations. Master Program “Structural Engineering” is a modern interdisciplinary study program offered at the Faculty of Civil Engineering since 2005-2006, the first master program taught in English in field of Civil Engineering from Romania. The master program is intended to help the students gain expertise in designing civil engineering structures, develop skills in construction project management, finite element analysis and not only. The program gives additional qualifications on Management of European and international research projects and Business communication and ethics / legislation. First Year During the first year, the student will be acquainted to both theoretical concepts and practical methods to assess the complex behaviour of structural elements and civil engineering structures subjected to static and dynamic loads. At the same time, advanced numerical modelling techniques will be presented as a necessary step towards an efficient design process both from a structural and... [-]

Master in Power Engineering

South Ural State University
Campus 2 years September 2017 Russia Chelyabinsk

The purpose of this degree program is to train highly qualified specialists capable of solving complex engineering and management tasks in power industry. The program is focused on preparing students for leading edge positions in the area of automated electromechanical and heat power systems in following industries: [+]

Highlights The purpose of this degree program is to train highly qualified specialists capable of solving complex engineering and management tasks in power industry. The program is focused on preparing students for leading edge positions in the area of automated electromechanical and heat power systems in following industries: metallurgy, oil and natural gas industry, mechanical engineering, electric transport etc. Our students will benefit from outstanding learning experience available and acquire in-depth knowledge of up-to-date and innovative technologies in electric drive systems; information systems; industrial networks; dust, gas, water treatment systems; modern electrical and heat engineering equipment; distribution of electricity and thermal energy; industrial safety. Forms The degree program offers lectures and practical training sessions, computer modeling, research activities, industrial and teaching practice. Support You will learn from leading SUSU academics, who are at the cutting-edge of their discipline and possess an extensive experience in training power-engineering specialists. This means you will learn the latest theories and techniques, which help supporting your intellectual and professional development. Facilities We have dedicated computing facilities with industrially relevant software and hardware, modern scientific and educational laboratories including the supercomputer simulation technologies, systems and equipment of world leaders in power engineering. You are always working with the most up-to-date equipment available. This study program allows you to gain the knowledge and experience necessary for professional work in the field of power engineering at multinational world leading companies. Find more details at www.epa.susu.ru at South Ural State University (SUSU) [-]

MTech in Industrial Engineering (Research - based)

University of Johannesburg
Campus Part time 1 - 2 years February 2018 South Africa Johannesburg

This qualification is intended to allow graduates to apply integrated operations techniques, together with advanced analysis and problem-solving, to a particular specialisation in the field of Industrial Engineering/Operations Management, through involvement in an applied research project. [+]

Best Part time Masters in Industrial Engineering 2017. This qualification is intended to allow graduates to apply integrated operations techniques, together with advanced analysis and problem-solving, to a particular specialisation in the field of Industrial Engineering/Operations Management, through involvement in an applied research project. Qualification outcomes and assessment criteria Conduct research and development in a specialised area and engage in the transfer of technology in the field of Industrial Engineering or Operations Management. Admission requirements and selection criteria A Baccalaureus Technologiae: Industrial Engineering, or an equivalent qualification of an equivalent standard. Conferment of the degree The MTech: Engineering: Industrial will be conferred on students who have completed the dissertation successfully. [-]

Master's Degree In Structural Design And Calculation

laSalle Barcelona Postgraduate
Campus September 2017 Spain Barcelona

The Master in Integral Construction Management - Specialty Design and Structural Calculation (MGICE) focuses on the study of structural analysis and its application in project planning, organization, implementation and maintenance. [+]

The Master in Integral Construction Management - Specialty Design and Structural Calculation (MGICE) It focuses on the study of structural analysis and its application in project planning, organization, implementation and maintenance. Currently structures of equal or greater importance than traditional ones, which are most commonly implanted in our constructions arise. So technicians have to be constantly updated and should even have specific professional accreditation, with increasing level of demand, according to industry demands. Prefabricated, provisional, spatial structures are studied, etc. All of great complexity, but increasingly common in our work environment. Moreover, the importance of project management is increasingly important to achieve some projects and execution of the most specific and cost structures. The complex study of the economic management and the sustainability of these elements make us discover more viable types and structures adapted to our times. The program also responds to the current demand from the construction have unprofesional with capacity to develop, with guarantees, management building process industry from a holistic perspective and with the particular focus of each of their specialties offer . INTERNATIONAL RECOGNITION OF RANKINGS for MASTER IN MANAGEMENT INTEGRAL CONSTRUCTION 4th Best in Spain in Real State Management sector and among the top 100 in the World Ranking Eduniversal. 5th Best Master in Spain. World Ranking. Responds to the demand in the market for professional profiles able to provide architectural solutions that incorporate the use of efficient energy systems. Addresses the entire management of the construction process from the gestation of the ideaque... [-]

Masters in Plastic Materials Engineering

ITECH Lyon
Campus 3 years September 2017 France Lyon

ITECH engineers distinguish themselves from those of other chemistry schools through advances in the manufacturing of plastic materials, on top of fundamental knowledge. [+]

Best Part time Masters in Industrial Engineering 2017. ITECH engineers distinguish themselves from those of other chemistry schools through advances in the manufacturing of plastic materials, on top of fundamental knowledge. ITECH plastic manufacturing engineers complement their speciality with aspects of the other majors: coating different plastic materials (Formulation Chemistry); composite materials used in transport, sports and leisure, and geo-textiles (Textile Materials). From hygiene to aeronautics, automotive to sports, many sectors make use of plastic manufacturing engineers who can work as much with raw material suppliers, as with “formulators”. Admission for Students outside France 1st year admission: Graduate studies in chemistry (Bachelor’s degree or equivalent , 180 ECTS) A satisfying level in English: B2 CERF + interview with ITECH 2nd year admission: 1 year of postgraduate studies completed (M1 or equivalent, 240 ECTS) How to apply? Visit and register at inscription.itech.fr (for EU students) Or Apply through Campus France site (CEF procedures). For countries which do not have CEF procedures with France, you must do an Application for Preliminary Admission (DAP) to the cultural service of the French embassy in your country of residence. Tuition fees Tuition fees are 6 500€/year. Hands on training ITECH is adamant in supplying students with a strong professional experience. On top of a multidisciplinary teaching, the institute adds a 10 month minimum of mandatory internships in companies for the regular status students. End of 1st year: International experience - minimum 6 weeks This international experience is prepared in advance in terms of an intercultural... [-]

Master's Degree In Industrial Engineering

Jaume I University (Universitat Jaume I)
Campus 3 semesters September 2017 Spain Castellón

The master collects the experience of being imparted two decades leading the degree of Industrial Engineering at the University, and he generalist and multidisciplinary training feature of this degree is consolidated. [+]

The master collects the experience of being imparted two decades leading the degree of Industrial Engineering at the University, and he generalist and multidisciplinary training feature of this degree is consolidated. This training enables today has industrial engineers in areas as diverse as management, direction and production management, purchasing management, maintenance, mechanical, electrical and thermal design of machinery and equipment, automation and control, etc. areas The general training is also what makes it a very valuable professional for small and medium enterprises, which is corroborated by the high demand for labor. Graduates of this Masters get own professional responsibilities industrial engineer and can access doctoral programs to continue their research training. Coordination: Ramón Cabello López. Department of Mechanical Engineering and Construction. UJI. Number of credits: 90 ECTS credits Duration: three semesters (October 2017 / February 2019) Mode: Group A (October 2017 / May 2018 and the first semester of 2018/2019) Presencial Group B (February 2018 / May 2018 and the full year 2018/2019) Language of teaching: Spanish Price: pending publication (2016: € 46.20 / credit) [-]

Master's Degree In Design And Manufacture

Jaume I University (Universitat Jaume I)
Campus 3 semesters September 2017 Spain Castellón

The aim of the course is to enhance and complement the training of graduates of degree in the fields of industrial engineering and design in the fields of design and manufacture of industrial products and design and manufacture of machinery, fields with numerous professional opportunities . [+]

Best Part time Masters in Industrial Engineering 2017. The aim of the course is to enhance and complement the training of graduates of degree in the fields of industrial engineering and design in the fields of design and manufacture of industrial products and design and manufacture of machinery, fields with numerous professional opportunities . The approach is essentially practical and oriented to project development and the use of CAD / CAM / CAE technologies. Access to master is contemplated for different input profiles: Graduates of future undergraduate degrees in the field of industrial engineering graduates in industrial engineering or technical engineering of existing titles and qualified aliens profile similar to previous training. The master has obtained the quality seal EURACE (European Accreditation of Engineering Programmes). Coordination: José Vicente Abellán Nebot. Department of Industrial Systems Engineering and Design. UJI. Number of credits: 75 ECTS credits Duration: three semesters (October 2017 / November 2018) Mode: (October 2017 / June 2018) Language of teaching: Spanish Price: pending publication (2016: € 46.20 / credit) [-]

Master's Degree In Science, Technology And Applications Of Ceramic Materials

Jaume I University (Universitat Jaume I)
Campus 1 year September 2017 Spain Castellón

The Master in Science, Technology and Applications of Ceramic Materials is proposed as an option for graduate degree holders in Chemical Engineering or a related degree. But in addition, this degree is designed so that its contents are equally useful to provide [+]

This master is presented as an option for graduate degree holders in Chemical Engineering or a related degree. But it has also been designed so that its contents are useful to provide current graduates and engineers trained in complementary and cutting-edge ceramic technology. With the contents of master specialization in ceramic engineering, highly demanded in the largest industrial sector in the vicinity of the UJI, with which it aims to achieve the following objectives conferred: prepare technically to understand, analyze and solve the problems of processing of ceramics; provide essential knowledge for engineering practice applied to ceramics; instruction in the rigor that requires professional engineering practice applied to ceramics. Coordination: Juan Carlos Jarque and Antonio Barba Juan Fonfría. Department of Chemical Engineering. UJI. Number of credits: 60 ECTS credits Duration: one academic year (October 2017 / September 2018) Mode: (October 2017 / May 2018) Language of teaching: Spanish Price: pending publication (2016: € 46.20 / credit) [-]

Master in Engineering Materials Science

KTH Royal Institute of Technology
Campus September 2017 Sweden Stockholm

The Master’s programme in Engineering Materials Science is characterised by a cross-functional approach – focusing on both the understanding and study of current materials, processes and applications, as well as the development of new materials and [+]

Master in Engineering Materials ScienceThe Master’s programme in Engineering Materials Science is characterised by a cross-functional approach – focusing on both the understanding and study of current materials, processes and applications, as well as the development of new materials and processes.Programme outlineThe programme is open to students with materials backgrounds and has three different tracks, each focusing on different complimentary aspects of material and process development, while incorporating each students’ individual experience in the area. This makes the programme both comprehensive in the fundementals of the field, and tailored to meet personal academic and career goals.Track 1 - Industrial Materials (IMTA)Materials such as steel, lightweight metals and semi-conductors have made development possible for many years and will continue to do so in the future. Through the choice of courses, the student may decide to specialise in Materials Design, Process Science or, preferably, a combination of both areas. This track is only for students with a solid background in Materials Science and Engineering and Metallurgy.Track 2 - Materials and Process Design (MDNA)Materials and Process Design has, like Industrial Materials, a strong focus on materials and processes, properties and design. The content of the courses offered within this specialisation will cover all of the different areas of Engineering Materials Science and Metallurgy during the first term. This track is only for students with a background in Mechanical Engineering, Chemical Science and Engineering or Engineering Physics.Track 3 - Materials Processing (MPTA)Materials Processing has a strong focus on materials in general and provides inter-disciplinary... [-]