Masters Program in Mechanical Engineering in Canada

View all Masters Programs in Mechanical Engineering in Canada 2017

Mechanical Engineering

A Masters degree gives you the opportunity to either further your understanding of a particular question or take off in a completely different way using skills you have gained from your previous undergraduate degree.

A wide range of knowledge as well as an assortment of methods and skills are necessary in mechanical engineering. This subject is diverse because it is the foundation of designing and manufacturing everything from small individual parts and devices to large systems.

Canada is a North American country consisting of ten provinces and three territories. Located in the northern part of the continent, it extends from the Atlantic to the Pacific and northward into the Arctic Ocean.

Top Master Programs in Mechanical Engineering in Canada 2017

Read More

Specialized Graduate Studies In Engineering (project Type)

Université du Québec à Rimouski UQAR
Campus Full time September 2017 Canada Rimouski Lévis

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

Best Masters in Mechanical Engineering in Canada 2017. The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and to increase... [-]

Specialized Graduate Studies In Engineering (model Course)

Université du Québec à Rimouski UQAR
Campus Full time September 2017 Canada Rimouski Lévis

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and to increase their skills in various fields of engineering and... [-]

Master Of Engineering (type Course With Project)

Université du Québec à Rimouski UQAR
Campus Full time September 2017 Canada Rimouski Lévis

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. [+]

Best Masters in Mechanical Engineering in Canada 2017. The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance... [-]

Master Of Engineering (with Memory)

Université du Québec à Rimouski UQAR
Campus Full time September 2017 Canada Rimouski Lévis

The master of engineering is to improve scientific and technical knowledge in engineering, [+]

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance and management of industrial systems Telecommunications and information... [-]

Master of Engineering: Mechanical-Aerospace

University of Windsor
Campus Full time Part time 3 - 5 semesters September 2017 Canada Windsor + 1 more

Windsor’s unique climate of co-operation between academic, business and industry sectors gives you access to state-of-the-art engineering facilities and outstanding career opportunities. [+]

Best Masters in Mechanical Engineering in Canada 2017. Windsor’s unique climate of co-operation between academic, business and industry sectors gives you access to state-of-the-art engineering facilities and outstanding career opportunities. The Faculty of Engineering offers programs designed to develop professional competence and to prepare students to solve the technical problems of society and the global environment. Our departments include: Civil and Environmental Engineering Electrical and Computer Engineering Industrial and Manufacturing Systems Engineering Mechanical, Automotive & Materials Engineering On behalf of our entire Faculty, we'd like to welcome you! Whether you're a high school student trying to figure out what Engineering is all about, a potential graduate student considering advanced study through a Masters or Doctoral degree, a company or industry representative wondering if our university can assist you with a research problem, we're positive that the Faculty of Engineering here at the University of Windsor can help you. For those of you who are new to university, please browse our Faculty website to find out more about what Engineering is, what we can offer you, and if you can't find the information you need, please drop us a line. We certainly hope you will join us, ready to embark on a challenging and exciting journey of education. Engineering takes work, but it is work that is well rewarded. When you finish, you'll have a degree that can lead you to many places. For those of you who already have an undergraduate degree and wondering if you should further enhance your... [-]

Master of Engineering: Mechanical-Materials

University of Windsor
Campus Full time Part time 3 - 5 semesters September 2017 Canada Windsor + 1 more

In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. [+]

MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. Engineering Materials The Vision Statement for the Engineering Materials Graduate Program is: The Engineering Materials Graduate Program recognizes the close relationship between advanced level education and the advancement of knowledge, and is committed to excellence in graduate teaching and research. The Mission statement for the Engineering Materials Graduate Program is to provide an outstanding learning environment for productive graduate research to maintain state-of-the-art research laboratories equipped with the most modern research equipment to offer students with opportunities for a rewarding education to keep self-sustained growth by a high output of student co-authored peer-reviewed research publications, and strengthening collaborative research with other universities and industry to expose students to challenging industrial problems that are studied using a sound scientific methodology and experimental/theoretical research skills to prepare students for careers in teaching and/or research in academia or in industry to train students to acquire autonomy in conducting innovative research The Engineering Materials (EM) graduate program is fully accredited by the Council on Quality Assurance of Ontario Universities (previously, Ontario Council on Graduate Studies (OCGS)). The high caliber of the research activity within the Engineering Materials Program has been a traditional strength of the program. The objective... [-]

Master of Engineering: Mechanical-Automotive Option

University of Windsor
Campus Full time 3 semesters September 2017 Canada Windsor

The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. [+]

Best Masters in Mechanical Engineering in Canada 2017. The objective of the Master of Engineering - Mechanical Engineering (Automotive Option) is to prepare graduates for leadership positions within the automotive industry. The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. At the University of Windsor, we strive to create an environment of learning, opportunity, and personal and professional growth. Our students go on to pursue careers in government, industry and at various universities across North America and the world. Our friendly and safe campus is ideal for learning about and becoming a part of the automotive industry. We are located on the Canada-United States border in the automotive and manufacturing heartland of North America. Our unique location means that we can offer our students opportunities for international study, research and work experience that no other university in Canada can match. Learn from the best The key to a great university education is the quality of its teaching and research done by its professors. At the University of Windsor, you will be interacting with world-class faculty conducting cutting-edge research in the automotive area. They will be your mentors as you prepare yourself for the careers of the future. You will combine what you learn in the classroom with practical application so that you are ready... [-]