Part time Master's Degree in Manufacturing

Search Part time Masters Programs in Manufacturing 2018

Manufacturing

A Masters degree gives you the opportunity to either further your understanding of a particular question or take off in a completely different way using skills you have gained from your previous undergraduate degree.

Graduates of a Master’s degree in Manufacturing will be able to work in a variety of areas that have manufacturing processes. The program deals with the analysis of manufacturing problems, with the use of computer implementation, case studies or modelling techniques.

Request Information Part time Masters Degrees in Manufacturing 2018

Read More

Master of Manufacturing Management

Universiti Kuala Lumpur
Campus 1.5 - 3 years July 2018 Malaysia Kuala Lumpur

Master in Manufacturing Management is a program to enhance student's capability through industry collaboration, problem based learning, collaborative learning and experience sharing sessions. [+]

Master in Manufacturing Management is a program to enhance student's capability through industry collaboration, problem-based learning, collaborative learning, and experience sharing sessions.

The program is designed primarily for graduates who would like to pursue their career in management particularly in manufacturing field. Hence, the program aims to provide the advanced knowledge and capability in dealing with complex management challenges in modern manufacturing industries.

Requirements: Bachelor degree (level 6, Malaysia Qualifications Framework, MQF) with a minimum CGPA of 2.50 or its equivalent qualifications from local or other institution of higher learning as approved by the Senate of UniKL; or Bachelor degree (Level 6 MQF) with CGPA below 2.50 or its equivalent can be accepted subject to a minimum of 5 years of working experience in related field; and ... [-]

Master of Management (by research)

Universiti Kuala Lumpur
Campus 1 - 3 years July 2018 Malaysia Kuala Lumpur

Master of Management is a program to enhance student's capability through industry collaboration, problem based learning, collaborative learning and experience sharing sessions [+]

Full time - 6 semesters Thesis preparation needs minimum 6 months to graduate Areas of Research

Entrepreneurship - SME Management, Innovation Management, Technology Management, Global Entrepreneurship

Marketing - Retail Management, Supply Chain Management, Consumer Behaviour, International Marketing, Strategic Marketing, Branding, Customer Relationship Management

Finance - Islamic Banking and Finance, Investment, Corporate Finance, International Finance, Behavioral Finance, Monetary Economics, Portfolio Management, Bank Management

Management - Human Resource Management, Industrial Relations, Strategic Management, Organizational Behaviour, Leadership, Organizational Development, Corporate Responsibility, Sustainable Development Management... [-]


Master in Global Production Engineering and Management

Vietnamese-German University
Campus 2 years September 2018 Vietnam Ho Chi Minh City

Global Production Engineering and Management is a full-time 2-year Master Program offered at VGU by the Technische Universität Berlin. [+]

Globalization and technology development advance rapidly. In a global market, companies have to balance the ability to create and design innovative solutions as well as the ability to exploit them. Industry-based companies demand strategy-oriented personnel with a solid technological basis on the one side and an entrepreneurial attitude on the other. To meet the growing challenges and opportunities in a globalized economy, the need for leaders with international perspective increases

Rather than focusing on business administration, Global Production Engineering (GPE) enables engineers to create systematic technological innovation combined with efficient and effective industrial business management.... [-]


Master of Management and Manufacturing

Kellogg School of Management at Northwestern University
Campus 2 years September 2018 USA Evanston Midland

Today's global marketplace requires a new type of manager-leader: one able to fuse strategic business practices with cutting-edge technology. MMM is a two-year dual degree program of the Kellogg School of Management and the McCormick School of Engineering at Northwestern University. [+]

Today's global marketplace requires a new type of manager-leader: one able to fuse strategic business practices with cutting-edge technology. The Master of Management and Manufacturing Program offers an unparalleled opportunity to master these critical skills and prepare for a lifetime of professional achievement. MMM is a two-year dual degree program of the Kellogg School of Management and the McCormick School of Engineering at Northwestern University.The MMM program offers many advantages:

The opportunity to earn two degrees, with one set of curricular requirements, in just two years: the Master of Business Administration degree from the Kellogg School of Management and the Master of Engineering Management degree from the Robert R. McCormick School of Engineering and Applied Science. A flexible curriculum that allows students to take a wide array of courses in areas most suited to their career goals, including marketing, operations, finance, and entrepreneurship. A hands-on, team-based approach to learning that applies theory to real-world challenges. A shared student experience with peers in the Kellogg School's full-time MBA program, including extracurricular and leadership opportunities. Access to world-class experts and facilities in nanotechnology, biotechnology and other technical disciplines with significant business implications. Outstanding career opportunities in a wide range of functions and industries, including general management, operations and production, finance, product development, business development, marketing and strategic planning. ... [-]

Master's Degree In Design And Manufacture

Jaume I University (Universitat Jaume I)
Campus 3 semesters September 2018 Spain Castellón de la Plana

The aim of the course is to enhance and complement the training of graduates of degree in the fields of industrial engineering and design in the fields of design and manufacture of industrial products and design and manufacture of machinery, fields with numerous professional opportunities . [+]

The aim of the course is to enhance and complement the training of graduates of degree in the fields of industrial engineering and design in the fields of design and manufacture of industrial products and design and manufacture of machinery, fields with numerous professional opportunities .

The approach is essentially practical and oriented to project development and the use of CAD / CAM / CAE technologies. Access to master is contemplated for different input profiles: Graduates of future undergraduate degrees in the field of industrial engineering graduates in industrial engineering or technical engineering of existing titles and qualified aliens profile similar to previous training. The master has obtained the quality seal EURACE (European Accreditation of Engineering Programmes). ... [-]


Master of Good Manufacturing Practice

University of Technology Sydney
Campus Part time 2 - 4 years January 2019 Australia Sydney

The Master of Good Manufacturing Practice provides up to date and in depth good manufacturing practice (GMP) knowledge within the pharmaceutical, biotechnology and medical device industries. The course provides critical knowledge of legislation relating to the registration, manufacture, storage and supply of licenced therapeutic goods; GxP and quality systems compliance; and the concepts of quality management, risk management, quality assurance and quality control within this heavily regulated industry – all essential ingredients for career development. [+]

This being the only course of its kind in the Asia–Pacific region, the UTS: Pharmacy discipline has partnered with SeerPharma, the industry’s leading provider of technical compliance and quality assurance knowledge, to deliver students a practice-based and research-led education. Designed by leading experts in the field, the course provides professional development options and career pathways for students at all levels of industry organisations. It is ideal for students wishing to commence or enhance their pharmaceutical industry manufacturing career with an industry-recognised qualification.

Career options include laboratory and production staff, managers and practitioners in companies where good manufacturing practices are required.... [-]


MicroMasters Program in Principles of Manufacturing (Massachusetts Institute of Technology)

edX
Online Part time 64 weeks September 2018 USA Cambridge

Develop the fundamental skills needed for global excellence in manufacturing and competitiveness with the Principles of Manufacturing MicroMasters Credential, designed and delivered by MIT’s #1-world ranked Mechanical Engineering department. [+]

Overview

Develop the fundamental skills needed for global excellence in manufacturing and competitiveness with the Principles of Manufacturing MicroMasters Credential, designed and delivered by MIT’s #1-world ranked Mechanical Engineering department.

This program provides students with a fundamental basis for understanding and controlling rate, quality and costs in a manufacturing enterprise.

The Principles of Manufacturing are a set of elements common to all manufacturing industries that revolve around the concepts of flow and variations. These principles have emerged from working closely with manufacturing industries at both the research and operational levels.

Targeted towards graduate-level engineers, product designers, and technology developers with an interest in a career in advanced manufacturing, the program will help learners understand and apply these principles to product and process design, factory, and supply chain design, and factory operations.... [-]


Master of Engineering Leadership in Advanced Materials Manufacturing

University of British Columbia - Faculty of Applied Science
Campus 1 year January 2019 Canada Vancouver

The Master of Engineering Leadership (MEL) in Advanced Materials Manufacturing is an intensive one-year degree program for engineers who want to advance their careers in the automotive, aerospace and manufacturing sectors. [+]

The Master of Engineering Leadership (MEL) in Advanced Materials Manufacturing is an intensive one-year degree program for engineers who want to advance their careers in the automotive, aerospace and manufacturing sectors.

Experts in advanced materials manufacturing are instrumental to the research, development, testing and optimization of new multi-material manufacturing solutions to lighten cars and planes and reduce their environmental footprint. This is a rapidly evolving field and the growing need across multiple industries for those technical experts make participants of the program highly sought after.

In just one year, this master’s degree will: broaden your sector-relevant skills through a project-based curriculum that covers all stages of the industry value chain deepen your technical skill base through advanced simulation tools and case studies provide a dynamic learning environment that includes both classroom learning and integrated hands-on training offer opportunities for you to collaborate with world-renowned faculty and industry experts at UBC’s high-tech facilities and multidisciplinary research centres help you advance your career by balancing technical learning with in-depth leadership courses on project management, business and communication ... [-]

Masters in Leather Engineering - IN FRENCH

ITECH Lyon
Campus 3 years September 2018 France Lyon

ITECH leather engineers work for large chemistry product firms, in tanneries and taweries and for the users: leather shops, shoemakers. [+]

ITECH is the only institution in the world that offers an engineering degree in leather that suits the industry in all its aspects. The leather engineer’s job involves the transformation of raw skin into leather by supplying it with main parts of its added value. Practical workshops are essential and dominant in this major. There’re many qualities that are required: observation, touch, practical knowledge, rigor, esthetical. ITECH leather engineers work for large chemistry product firms, in tanneries and taweries and for the users: leather shops, shoemakers, etc. The leather market spreads worldwide and also requires extreme mobility, polyvale, ce and adaptability.

Admission for Students outside France ... [-]

MEng in Welding Engineering

University of the Witwatersrand
Campus 1 year February 2019 South Africa Johannesburg

Wits University offers the International Institute of Welding course leading to the IWE ( International Welding Engineer -[BScEng graduates]) and IWT ( International Welding Technologist [BTech graduates]). Wits University is an Approved Training Body (ATB) for the International Institute of Welding (IIW). Successful completion of the courses (60% min/each module and a 95% attendance record) entitles the candidate to apply for IIW registration. [+]

Wits University offers the International Institute of Welding course leading to the IWE ( International Welding Engineer -[BScEng graduates]) and IWT ( International Welding Technologist [BTech graduates]). Wits University is an Approved Training Body (ATB) for the International Institute of Welding (IIW). Successful completion of the courses (60% min/each module and a 95% attendance record) entitles the candidate to apply for IIW registration.

Benefits of the programme

The intent is to equip candidates for a career in the welding industry, this implying an understanding of the practice of welding engineering underpinned by sound science.

Curriculum Outline / Modules taught

The MEng in Welding Wits is made up of 12 courses divided into four main modules. The modules are welding processes, welding metallurgy, welded joint design and fabrication, and applications and case studies.... [-]


Expertise In Manufacturing Systems

Universidad Autónoma de Guadalajara
Campus 1 year July 2018 Mexico Guadalajara

Strengthen the area of ​​Manufacturing processing companies through the optimization of production systems, considering for it each of the elements that are part of the production chain. Apply techniques and tools of quality and productivity that lead to the pursuit of excellence. Promote the development of research in areas such as design and process optimization, design and development of new products and integration of production systems. [+]

Study Master of Manufacturing Systems in UAG

Program Objective

Strengthen the area of ​​Manufacturing processing companies through the optimization of production systems, considering for it each of the elements that are part of the production chain.

Apply techniques and tools of quality and productivity that lead to the pursuit of excellence.

Promote the development of research in areas such as design and process optimization, design and development of new products and integration of production systems.

Competitive advantages

Having a managerial approach in the design, development and implementation of manufacturing systems. Having a faculty featured in your area, with high academic vocation and international recognition.... [-]


Master Advanced Manufacturing Processes for Aeronautical Structures (AMPAS)

IMT Mines Albi
Campus 1 year September 2018 France Albi

The Advanced Master course AMPAS is designed by Mines Albi and ISAE with the support of aeronautical industry partners. [+]

Master Advanced Manufacturing Processes for Aeronautical Structures (AMPAS)

A booming industry

After a short recession period, the Aeronautical industry market is facing a rapid and continuous increase worldwide as shown by the record-breaking contracts recently signed by both Airbus and Boeing. These two industry leaders forecast an increase of close to 5% in activity over the next years and estimations indicate that the annual increase of large commercial airplanes will induce a doubling of the number of aircraft by 2030.

Nearly sixty percent of the turnover is subcontracted all over the world and concerns mostly production and manufacturing activities. As a consequence, most aeronautical subcontracting companies will have to increase their production rates but also to keep up to date with technological changes; moving from metallic processes toward composite materials processes. Moreover, the aircraft manufacturers have changed their supply chain structure in the last years, and subcontractors are now required to manage more complex parts and to take over, on their own, the qualification processes.... [-]