Part time Master's Degree in Industrial Management

See Part time Masters Programs in Industrial Management 2017

Industrial Management

Master-level studies involve specialized study in a field of research or an area of professional practice. Earning a master’s degree demonstrates a higher level of mastery of the subject. Earning a master’s degree can take anywhere from a year to three or four years. Before you can graduate, you usually must write and defend a thesis, a long paper that is the culmination of your specialized research.

A Master’s degree of Industrial Management helps Graduates understand technological advance, and how to apply it to strategic decisions for an organization. It uses science and technology to solve these issues, which in turn provides business opportunities.

Request Information Part time Masters Degrees in Industrial Management 2017

Read More

Master In Production And Improvement In Industrial Processes

OBS Business School
Online Part time 12 months May 2017 Spain Barcelona

The Master in Production and Industrial Process Improved OBS Business School pays special attention to planning resources, the definition of a good strategy of industrial organization and in product innovation and production processes. In addition, the program along different ways to manage change through projects will be studied by ... [+]

Best Part time Masters in Industrial Management 2017. Master in Production Management and Process Improvement In industrial companies, the Production Management is a key position whose good management directly impacts the performance of the company and, therefore, is a critical success factor in achieving competitive advantage through continuous innovation in industrial processes . The Master in Production and Industrial Process Improved OBS Business School pays special attention to planning resources, the definition of a good strategy of industrial organization and in product innovation and production processes. In addition, the program along various forms of managing change through projects, with particular emphasis on monitoring and control of production and management skills development will be studied. The program was new in 2014, with great success in its 1st call. The program offers an outstanding range of educational proposals, as Webinars with Danone, Grupo Irizar, Dorje Dondrup, etc. It also incorporates a DISC Development of the most important skills in the area of ​​knowledge module. Participants also have access to a powerful industrial benchmarking (INCO-I), with which we can measure the degree of excellence of its production plant. Professional outings Some of the career options you can choose to, among others, are: Director of operations Industrial Director Head of Plant / Factory Manager Address Process Engineering Director of Operational Excellence Continuous improvement Responsible Head of Lean Manufacturing Kaizen responsible Responsible Supply Chain / suppliers Approval Objectives of Master in Production Management and Process Improvement What goals are going to get? To offer a comprehensive vision of industrial management in the new competitive environment, focusing on the keys to Production Management. Skills development production manager to be able to implement the methodologies, through the most appropriate tools. Turning people into 'managers' and experts in the management of production processes. Mastering decision-making tools for proper optimization of production flows. Being aware of the importance of sustainable management of industrial processes. Knowing how to manage the production of ethically and socially responsible. Get a second accredited by the most reputable business school in Spain, EAE Business School, as ranked Merco (2014) and guaranteed qualification for a major public universities in Spain, the University of Barcelona (UB), with more than 560 year history. Curriculum Master in Production Management and Process Improvement The program is divided into 6 blocks and conducting a Final Project. The blocks are: BASICS OF SUPPLY CHAIN ​​MANAGEMENT AND DEMAND: Demand management and resource planning; Supply chain management. OPERATIONAL STRATEGY AND MANAGEMENT METHODOLOGIES: Operational Strategy and Lean Manufacturing Techniques Manufacturing process improvement and rapid response; Total quality management and advanced project management. INNOVATION: Product Innovation and Engineering. MONITORING AND CONTROL: Programming and Production Control; Finance Industrial Operations. Organizations and individuals: organizational systems, team management and leadership skills. PRODUCTION MANAGEMENT MULTICULTURAL ENVIRONMENTS: E-storey international purchases. Management in multicultural environments. Requirements Master in Production Management and Process Improvement The fundamental goal of our admissions process is to ensure the suitability of candidates. All participants must get the most out of this learning experience, through a context in which it is possible to develop a long-term relationship with classmates, teachers and alumni. These are the stages of the admission process: 1. Prerequisites for admission in February. Admission 3. Personal Interview 4. Cover letter in May. 6 Assessment Admissions Committee. Matriculation Degree of Master in Production Management and Process Improvement People who pass the evaluation of the program and meet the academic requirements established by the UB, will be awarded the UB (University of Barcelona). In addition, all persons who pass the assessment will receive the degree of EAE Business School. To obtain the degree of UB is necessary to have University Degree (Engineering Degree or Diploma). Failure to have a University Degree, once passed the different assessments, a diploma of university extension of UB is obtained. Financial Aid Master in Production Management and Process Improvement OBS offers candidates the scholarship program to promote continuing education for professionals, entrepreneurs and managers. To apply for one of these grants, which fund part of the program, candidates must be admitted to the program and meet the specified requirements. The Admissions and Scholarship Committee will assess the adequacy of the profile and the career of the candidates, the reasons given in the letter of scholarship application and the candidate's professional and academic recommendations. [-]

Master in Applied and Industrial Mathematics

Towson University - College of Business & Economics
Campus September 2017 USA Towson

Towson's Master of Science (MSc.) in applied and industrial mathematics (APIM) prepares you for high-demand careers in industry, government and academia. The APIM program emphasizes mathematical modeling, numerical computations, chaotic dynamics, queuing systems, financial systems and statistical analysis. [+]

Why Earn a Master's Degree in Applied and Industrial Mathematics? Towson's Master of Science in applied and industrial mathematics (APIM) prepares you for high-demand careers in industry, government and academia. The APIM program emphasizes mathematical modeling, numerical computations, chaotic dynamics, queuing systems, financial systems and statistical analysis. You will apply your knowledge outside of the classroom in a variety of research and internship opportunities. A Degree that Works The graduate program emphasizes numerical, algorithmic and computational problem-solving methods, and prepares you for careers in operations research, stochastic modeling, financial data analysis, statistics and more. The Applied and Industrial Mathematic Program offers two tracks. In the APIM you choose to focus your studies in either Differential Equations/Optimization or Applied Statistics/Mathematical Finance. If you prefer to study part-time you can take advantage of the program's flexible evening schedule. Advance Your Career Unlike most graduate programs in mathematics, Towson's applied master's gives you hands-on training through capstone coursework and required applied research projects. You will gain professional experience and learn to apply your skills in a two-term intern¬ship. Internship opportunities include projects in local industry or government and on-campus projects with faculty. Take the Lead With access to Towson's innovative Applied Mathematics Lab (AML), M.S. you gain leadership experience while working with undergraduates and faculty on research projects sponsored by corporations and government agencies. Past sponsors include Westinghouse Electrical Corporation, Citicorp of Maryland, Blue Cross-Blue Shield, Bell Atlantic, the Science Application International Corporation and the National Institute of Justice. Application Deadline This program has rolling admissions - in order to ensure timely processing we recommend submitting your application by August 1 for fall admission, December 1 for spring admission, and May 1 for summer admission. While we will continue to accept applications and materials after these dates, we cannot guarantee that your application will be reviewed in time for the start of classes. Admission Requirements A baccalaureate degree in mathematics or a related field. The applicant's undergraduate training must have included at least three terms of calculus, a course in differential equations and a course in linear algebra. Students with any deficiency in their mathematical background may be admitted conditionally if they are willing to correct such deficiency. An undergraduate GPA of at least 3.00 for full admission, 2.75 for conditional admission is required. All GPA calculations for admission are based upon the last 60 credits of undergraduate and post-baccalaureate study. [-]

Master in Industrial Systems Analytics

University of Vaasa
Campus 2 years August 2017 Finland Vaasa

The Master's Programme in Industrial Systems Analytics (ISA) provides content, models and methods to design, develop, implement and operate complex processes and systems in the energy sector organizations. [+]

Best Part time Masters in Industrial Management 2017. The Master's Programme in Industrial Systems Analytics (ISA) provides content, models and methods to design, develop, implement and operate complex processes and systems in the energy sector organizations. Energy systems are complex systems that require a holistic understanding and thus multiple perspectives of research and education. Energy systems can be seen as socio-technical systems, and the new ISA programme is built from Technology, Organization and People perspectives (TOP). Systems dynamics and systems thinking are the connecting elements necessary for the programme. It is important to understand how the technology and people are organized to achieve the goals. The program prepares the students to develop and manage product and service innovation for industrial energy systems, delivery and use. The courses consist of lectures, team work assignments, projects, presentations and final exams. The topics taught in this programme include Data science and analytics, Quality engineering, Systems engineering, Decision support, Project management and Industrial project work. [-]

Master Control Systems Engineering

HAN University of Applied Sciences
Campus Part time 16 - 18 months September 2017 Netherlands Arnhem

HAN's Masters course in Control Systems Engineering provides you with cutting-edge knowledge and techniques that can be directly used in an industrial [+]

Applying knowledge to the industrial environment HAN's Masters course in Control Systems Engineering provides you with cutting-edge knowledge and techniques that can be directly used in an industrial environment. Complex processes require advanced control systems. This Masters course focuses on advanced regulating systems used in industry, such as optimal and model predictive control devices and multi-variable non-linear control devices. You also learn about the latest methods of statistical analysis. Upon graduation you will be ready for a specialised career in systems engineering. Cooperation with companies and other universities Associated large industries and specialised companies all acknowledge the constant need for control systems engineers with a Masters qualification. This is reflected in the support given by companies like DNV GL (KEMA), Shell, IPCOS, OMRON, SKF and Tatasteel, who share their knowledge by providing trainers and facilitate many of our major projects and excursions. HAN also cooperates with other institutes and universities, such as Delft University of Technology, Wageningen University, Eindhoven University of Technology and Artemis/Edulab. As a result, teaching and laboratory facilities can be shared and students can benefit from guest lecturers. This also enables the level and content of the course to be continuously monitored. The course is recognised and supported by the Royal Institute of Engineers in the Netherlands. International focus This course is unique in the Netherlands in that it focuses on the translation of skills and knowledge taught at university to the real world. Many of our graduation projects are carried out in association with multinational companies and the course itself has a truly international focus with students from all over the world. Master of Engineering in Control Systems Students completing the course with a graduation project (thesis) will be awarded the title Master of Science which is acknowledged worldwide. Completion of the course curriculum (without thesis) will entitle you to a postgraduate certificate. Full-time or part-time course taught in English The Masters course in Control Systems Engineering is taught entirely in English. You can combine your work and studies by choosing the part-time option. If you opt for studying full-time in the Netherlands, we will help you find a work placement position. Entry Requirements Applicants for this course need a Bachelors degree in Engineering or a related technical discipline, with a GPA of 2.8 or higher based on a 4.0 scale. Sufficient level of English As well as having a Bachelors degree, you will also need to be proficient in English. You will need one of the following: - TOEFL score of 550 or more - IELTS score of 6.0 or more - Cambridge Certificate in Advanced English - Cambridge Certificate of Proficiency in English Mathematics If you have doubts about whether you possess the required level of mathematics, you can work on some extra mathematics modules at home before the course starts. Exemptions If you can demonstrate that you have already covered certain units in the curriculum, you may receive exemption from some of the taught components of the course. All candidates with sufficient academic or field experience may indicate this in their application. [-]

MEng in Mechanical Engineering

Northern Arizona University
Campus August 2017 USA Flagstaff

The Master of Engineering is a non-thesis professional degree, based primarily on course work and/or on an engineering project designed with the guidance of a faculty advisor to address a need or problem specific to their engineering field of study (Civil, Environmental, Electrical, or Mechanical Engineering). [+]

Best Part time Masters in Industrial Management 2017. The Master of Engineering is a non-thesis professional degree, based primarily on course work and/or on an engineering project designed with the guidance of a faculty advisor to address a need or problem specific to their engineering field of study (Civil, Environmental, Electrical, or Mechanical Engineering). This degree program is designed to provide a broad, practice-based education. Student Learning Outcomes LO1. Demonstrate the ability to apply graduate level critical thinking skills to formulate and solve advanced mechanical engineering problems: Acquires knowledge on advanced contemporary engineering topics and computational tools specific to mechanical engineering. Develops the ability to identify, formulate, and solve relevant advanced mechanical engineering problems. Develops the ability to synthesize, explain, verify, and justify solutions to complex mechanical engineering problems. LO2. Demonstrate the ability to, independently and creatively, design, plan, and conduct complex mechanical engineering projects: Assesses the state of the art in the field of study. Applies, independently and creatively, appropriate engineering theories and tools towards developing a viable solution for the project. Designs and conducts activities specific to the project. LO3. Demonstrate the ability to communicate effectively the results of a comprehensive research project through oral presentations and publications. Creates a report reflecting the integration of knowledge acquired through the project. Delivers an oral presentation to peers summarizing the work performed on the project and its outcomes. Synthesizes and presents the relevance of the engineering project in both technical and non-technical terms. ADMISSIONS AND ENTRY The Master of Engineering (MEng) program offers a practice-oriented education that prepares graduates for real-world engineering challenges. Degree requirements The Master of Engineering (MEng) requires the completion of 30 hours of coursework. At least half of the coursework, not including the practice-oriented project, must be in engineering. This minimum may be higher in some academic emphases. A thesis is not required; however, a practice-oriented project of up to 6 hours is optional in some emphases. Within the total of 30 units, you must complete a minimum of 3 units in applied engineering mathematics, as well as 3 units of engineering management or business. You must take at least 10 units of coursework from your home institution. Prior to graduation, you must satisfy the requirements of a capstone event, which is developed and administered by your advisory committee. Also, note the following policies that apply to all students who choose NAU as their home institution: The Graduate College at NAU requires at least 24 hours of formal coursework—that is, courses other than individualized courses such as independent study, research and master's project. You may apply up to two 400-level courses toward your degree (6 credit hours maximum). A limit of 25% of your coursework (a maximum of 7.5 hours) may be transferred from accredited institutions outside Arizona, provided the grade is "A" or "B". You will need to fill in a petition to transfer form and ask for the signature of the chair of your advisory committee. You are responsible for choosing the chair and members of your advisory committee by the time you complete 9 units of coursework. Also, no later than the first month of the semester in which the 10th credit unit is taken, you must submit a program of study (POS) listing all coursework intended to satisfy the MEng degree requirements. Note that the POS is subject to the approval of your advisory committee and the Graduate Programs Director at NAU. Additional requirements for each of the program emphases are described on the specific departmental pages. Each academic emphasis has specific course requirements in addition to the general program requirements described above. If you do not have a bachelor’s degree or an equivalent in Mechanical Engineering, then you will be required to complete pre-admission courses to achieve equivalency. [-]

International Master in Industrial Management (IMIM)

MIP Politecnico di Milano School of Management
Campus 24 months September 2017 Italy Milan Spain Madrid United Kingdom Edinburgh + 3 more

The International Master in Industrial Management (IMIM) is designed to provide students with primarily scientific or engineering based educational backgrounds with essential business and managerial skills, relevant to pursuing careers in internationally orientated manufacturing and servicing industries. [+]

In partnership with Heriot Watt University (UK), Universidad Politecnica de Madrid (Spain) and TUM School of Management, Germany Start date: September 
Duration: 16 months + Master Thesis
 Format: Full Time Fee: € 16,500 for European candidates and € 18,500 for non-European candidates Teaching language: English
 Location: MIP Politecnico di Milano (Italy), Universidad Politecnica de Madrid (Spain), Heriot-Watt University (Scotland), TUM School of Manangement (Germany), Beijing Jiaotong University School of Economics and Management (China) Required qualification: 3 year Bachelor's degree in a scientific or technical discipline (minimum 180 ECTS) The International Master in Industrial Management (IMIM) is designed to provide students with primarily scientific or engineering based educational backgrounds with essential business and managerial skills, relevant to pursuing careers in internationally orientated manufacturing and servicing industries. Aims of the IMIM The IMIM aims to provide students with the competencies and skills necessary to develop a successful career in internationally orientated manufacturing and service industries. The programme seeks to bridge the gap between university and industry, by teaching the relevant knowledge and skills essential to effective managerial practices, especially the skills and knowledge not traditionally taught in technical or scientific university programmes. The course places great emphasis on fostering an integrative teaching approach aimed at developing the ability of students to tackle issues in an interdisciplinary manner, while additionally providing an overview of general management concepts, such as marketing and accounting, through an industrial context. The programme also offers, through close collaboration with associated industrial and service companies, the chance for students to combine practical and relevant knowledge and skills with invaluable industry experience. 5 Different Study Locations Around the World Education is performed in a highly internationalised environment with the possibility to spend the 4 semesters of the course in up to 4 different countries across Europe and Asia. The student experience is highly international and goes beyond the classroom. Students come from around 24 nations and participate in language courses, seminars with local managers and company visits in the host country. The International Master of Industrial Management is a collaborative master between MIP Politecnico di Milano, Universidad Politécnica de Madrid and Herriot-Watt University in Edinburgh. Students will also have the possibility of attending the 3rd semester and undertaking the master thesis in TUM School of Management, Germany. Alternatively, they can opt to spend their 3rd semester in Beijing Jiaotong University School of Economics and Management, China. The master is ideally designed for students with a technical or scientific background and seeks to develop the managerial skills and competencies needed to pursue managerial careers in internationally orientated manufacturing and service industries. The programme is taught entirely in English and students have the opportunity to study in a number of renowned universities across Europe and the world. Programme Details The IMIM is 50% content and 50% context related. In addition to the delivery of managerial content, the program facilitates and stimulates student participation in the cultural, economic and social life of each of the countries where study is undertaken. The course is 16-months long, plus the Master Thesis. At the conclusion of the programme, students will be awarded with an internationally recognised degree from the partner universities including: International Master in Industrial Management from Universidad Politécnica de Madrid First Level Master degree: International Master in Industrial Management from Politecnico di Milano Master of Science from Heriot-Watt University or Master of Science (MSc) in Management, from Technische Universitaet Muenchen For most international specializing masters, MIP offers an intensive Italian language course during the first week of classes. Students have then the opportunity to attend a standard Italian language course (up to 40 hours) along the semester. Students will spend each of the three semesters at one of the partner institutions: starting in Madrid, Spain, and subsequently continuing with the second semester in Milan, Italy and the last one in either Edinburgh (UK), Munich (Germany) or Beijing (China). Students now have the possibility of attending the 3rd semester and undertaking the master thesis in TUM School of Management, Germany or they may opt for a semester in Beijing. In order to receive the MSc degree from TUM School of Management, students have to undertake the third semester receiving 30 credits and also undertake the Master thesis there receiving another 30 credits. Examples of companies involved in students' Master Thesis and post-programme hiring: ABB Accenture Arbikie Highland Estate Arcelor Mittal Automotive Lighting italia S.p.A. BMW Bombarider Cisco Systems CONAI – Consorzio Nazionale Imballaggi Decathlon France EFMD Ernst&Young Consulting Garuda Indonesia General Electric GIS International Henkel AG & Co. KGaA IKEA Infineon technologies Italcementi Lamborghini L'Oréal Materialise Medtronic italia S.p.A ONU P&G Porsche SAS Siemens Sony Telefonica The Lean Six Sigma Company UPS VivaSanté Whirlpool Course Objectives The programme prepares students for careers in industrial and technical management, meeting the need for technical university graduates to be able to assume broader tasks and responsibility in modern managerial roles. This is done through: Emphasis on relevant managerial topics that are highly beneficial for graduates of technical university programmes, such as operations and supply chain management. The study of concentration streams, as chosen by the student according to preference or region of interest, which allow the students to focus their studies on a particular area of managerial theory. The participation in the social, economic and cultural life of the host country, which prepares students for working in an international economy across many countries. Admissions Ideal Candidates for the IMIM Programme The ideal candidate for the IMIM course are students with educational experience in a technical or scientific discipline. The minimum educational requirement for the programme is a bachelor’s degree or recognised equivalent from an accredited institution of at least three years full time study (180 ECTS). Although not essential, graduates with some years of experience in a scientific or technical field are highly regarded. In addition, students should display a strong work and leadership ethic, and be prepared to meet the challenges associated with an intensive masters degree. The course is taught entirely in English, and so students are expected to have a proficient level of English prior to the commencement of the programme. Applications Applications are now closed for both EU and Non-EU candidates for the September 2016 intake. The application cycle for the September 2017 intake will open in October 2016. All applications have to be submitted via the Online Application Platform The minimum requirements for admission -A Bachelor degree or recognized equivalent from an accredited institution (minimum 3 years full time study = 180 ECTS) in a scientific or technical discipline. (e.g. candidates with a background in Economics are not eligible) Please note that applicants' most recent Degree-level award must have been awarded no later than five years from the starting date of the academic year for which the candidate is applying i.e. a candidate applying for a place in 2016 must have gained their bachelor degree no earlier than 2010. -High proficiency in the English language (The relevant certificate must be valid at the time of admission AND during entrance in the UK for the third semester) TOEFL ibT 89 (with minimum scores of 21 in listening, 22 in speaking, 24 in reading and 22 in writing) - We do NOT accept TOEFL paper-based; We do NOT accept TOEFL ITP. IELTS = min. 6.5 (with no individual subject lower than 6.0) CAMBRIDGE = min. CAE (Certificate of Advanced English) - grade B with a minimun of C in each element Pearson PTE - min. 62 overall score (min. 57 in each of the 4 elements) We do NOT accept TOEIC We usually do NOT accept university studies carried out in English as proof of language ability. A list of English-speaking countries are excluded from the requirements above. Please contact us for further information. The candidate must also submit the following supporting documentation in English via the online platform: Online Application Form; Curriculum Vitae (European format) - relevant work experience is highly regarded but not mandatory; Two letters of recommendation; Recent GMAT scores – highly regarded but not mandatory, we also accept GRE scores; Essay (in English) describing previous studies, motivations and professional project; for students applying for Erasmus Mundus scholarships, please also state your motivation towards Europe and the European culture. Copy of passport; 2 recent passport photos; Publication list and patents in English (only if applicable) WARNING: please, follow strictly the list provided; all documents must be in PDF format and have to be uploaded according to the order provided in the list. All extra documents (i.e. high school academic records, training certificates) will not be considered. All candidates who apply before the deadline in January have the option to be considered for Erasmus Mundus. To be considered, students should only tick the ‘Erasmus Mundus’ option in their online application form. [-]

Master of Engineering (Management)

RMIT University: Online
Online Part time 2 years October 2017 Australia Melbourne

Develop engineering leadership and project management skills with RMIT University’s online Master of Engineering (Management). Likened to an MBA for engineers, this Masters is designed not just for skilled engineers but also for entrepreneurs who want to advance their career and prepare for the challenges of leadership in engineering and technology-based organisations. [+]

Best Part time Masters in Industrial Management 2017. Develop engineering leadership and project management skills with RMIT University’s online Master of Engineering (Management). Likened to an MBA for engineers, this Masters is designed not just for skilled engineers but also for entrepreneurs who want to advance their career and prepare for the challenges of leadership in engineering and technology-based organisations. 
While closely following the MBA with specific Engineering studies, our online Master of Engineering (Management) delivers a tailored qualification specific to the needs of the growing engineering management sector. 
 What you will learn: skills necessary to face the evolving challenges of engineering management complex project management techniques how to evolve established practices and develop systems-thinking approaches strategic managerial skills 
 What you will study: System Engineering Principles Management of Technology Building Quality Organisations Industrial Systems and Environments Integrated Logistics Support Management Risk Management and Feasibility Engineering Economic Strategy International Engineering Management Performance Management Foundations Project Management Masters Research Project 1 
 The benefits of studying online with RMIT Study while you work full-time RMIT’s accelerated online programs prepare you for greater career success, while you continue to work full time. This flexible approach to postgraduate study offers more opportunity to carry on with life commitments while advancing your career. Finish sooner You can enrol into any of our six study periods throughout the year; each study period is seven weeks long. So whether you need to fit your study around work, family, or treks through the Himalayas, you can create a timetable that suits you. No on-campus exams or lectures
While you will have online assessments, the Master of Engineering (Management) delivers a convenient online program without the requirement for on-campus attendance and traditional exams. All lecture material and content is delivered direct to you through an interactive online learning platform, wherever you are. Access to world-class academics Our online programs are developed and led by renowned academics and industry leaders who possess the most up-to-date knowledge to equip you to tackle management challenges. We’ve simply optimised our on-campus content for the digital classroom to make studying more achievable for busy lifestyles. Work-connected learning
The driving force behind our program is the industry connections you’ll make while studying. Learn from renowned academics and industry leaders, while guided by a notable advisory board of executives. This means that what you learn can be applied to your work immediately. Dedicated support and assistance Our study concierges are experts in student support and will be with you every step of the way, available to help you throughout your study journey. Students will receive one-on-one guidance, assistance and motivation as well as help you access any tools, resources or services you need, and help you achieve your study goals. Program intakes 6 intakes annually (October, January, March, May, July and September). Nested qualifications Our Master of Engineering (Management) encompasses courses that make up our Graduate Certificate and Graduate Diploma, so should you need to exit the program early you still have earned a postgraduate qualification. Entry requirements An Australian Bachelor of Technology, Bachelor of Engineering Science or Bachelor of Engineering, at AQF8 level or equivalent, in any engineering discipline, or a Bachelor of Business, at AQF8 level or equivalent, in any business discipline, with a Grade Point Average (GPA) of equal to or greater than 2.0 out of 4.0. Applicants with a GPA less than 2.0 out of 4.0 may be considered on a case-by-case basis, with consideration given to at least two years' relevant work experience in engineering or business; or An Australian Bachelor of Technology, Bachelor of Engineering Science or Bachelor of Engineering, at AQF7 level or equivalent, in any engineering discipline, or a Bachelor of Business, at AQF7 level, or equivalent, in any business discipline, with a Grade Point Average (GPA) of equal to or greater than 2.0 out of 4.0. AND at least two years' relevant work experience in engineering or business. Applicants with a GPA less than 2.0 out of 4.0 may be considered on a case-by-case basis, with consideration given to at least two years' relevant work experience in engineering or business; or An Australian Master of Engineering, Master of Business or PhD, or equivalent, in any engineering or business discipline. International qualifications are assessed for comparability to Australian qualifications according to the Australian Qualifications Framework (AQF). [-]

ME Materials Science & Engineering

UCD College of Engineering and Architecture
Campus 2 years September 2017 Ireland Dublin

The ME in Materials Science and Engineering provides engineers with a specialist education and training in the area of metals, ceramics, polymers and composites for industrial engineering applications from biomedical device manufacture to future energy solutions. [+]

ME Materials Science & Engineering Graduate Taught (level 9 nfq, credits 120) The ME in Materials Science and Engineering provides engineers with a specialist education and training in the area of metals, ceramics, polymers and composites for industrial engineering applications from biomedical device manufacture to future energy solutions. This Masters is accredited by both Engineers Ireland and the IOM3 (UK). Graduates from this programme will be fully qualified professional engineers, capable of working anywhere in the world at an advanced technical level. Focus on real-world materials used for the manufacture of advanced engineered components and systems such as biomedical implants. Integrated theoretical, conceptual and practical knowledge. Technical research project in collaboration with world leading research groups and researchers. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes A bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Engineering or science graduates from any cognate discipline who are seeking to specialise in materials science and engineering at postgraduate level Course Description Materials Scientists and Engineers are at the centre of virtually every area of technology from optoelectronics to space materials and from automotive and aeromotive manufacturing to biomedical devices. Graduates from this programme will be fully qualified professional engineers, capable of working anywhere in the world at an advanced technical level or as a professional engineering manager. Graduates will also have specialist training in underlying scientific fundamentals and practical materials handling and analysis techniques that will make them attractive to either potential employers or equip them for further study at advanced postgraduate level such as PhD studies in Ireland or across the world. Career Opportunities If you are a graduate of the ME Materials Science & Engineering programme you can look forward to limitless employment opportunities in a substantive array of industries. Most companies worldwide employ materials professionals. A number of UCD materials graduates have been employed by companies such as General Electric or Rolls Royce (Aerospace), Astrium (Space), Stryker, Boston Scientific (Biomedical) or Siemens (Energy). Fees, Funding and Scholarships ME Materials Science & Engineering (T275) Full Time EU Year 1 - € 7490 EU Year 2** - € 7490 nonEU Year 1 - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Student Internships The Professional Work Experience (PWE) module is incorporated into the two-year Masters of Engineering Programme and is designed to integrate a student’s academic and career interests with paid practical work experience for a 6-8 month period. The module provides students with the perfect opportunity to gain increased experience and understanding of their chosen field, assess where their strengths and weaknesses lie and maximise their knowledge of the available career possibilities. The practical skills acquired during this placement will give graduates a competitive advantage when applying for positions upon graduation. Entry Requirements A bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Graduate Profile Gavin McGlynn Graduate I chose this course as I was interested in working with the smallest building blocks in engineering. Once in the course I became fascinated by CSI-like investigations used to understand a material and how to improve its properties. My work placement brought me to the UK to work with polycrystalline diamond composites and was so fascinating that I did my research project with the company.Life in UCD also has the potential to be very rich. As well as studying, I had the chance to join and run many clubs and societies, experienced other cultures, picked up new sports and made friends from all areas of this diverse college. The course itself covered a broad range of processes and applications but was also flexible and allowed me to delve deeper into areas of interest to me such as medical devices, composites and nano-materials. This flexibility allowed me to work with people from different backgrounds which gave me new perspectives on how to tackle problems. The skills I have gained during this degree have given me a great grounding, allowing me to work in almost any field. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

Master of Science in Chemical Engineering Technology

KU Leuven - University of Leuven
Campus 1 year September 2017 Belgium Leuven

This master's programme includes a variety of disciplines. In addition to fundamental chemical-scientific course units, the curriculum includes the fields of socio-economics (company management, economics) and chemical technology (engineering, separation techniques, chemical process technology, industrial process technology, surface chemistry, environmental technology, etc.). [+]

Best Part time Masters in Industrial Management 2017. This master's programme includes a variety of disciplines. In addition to fundamental chemical-scientific course units, the curriculum includes the fields of socio-economics (company management, economics) and chemical technology (engineering, separation techniques, chemical process technology, industrial process technology, surface chemistry, environmental technology, etc.). A flexible cross-campus elective package and a master's thesis conducted in either a research-specific or industrial context enable you to focus your studies according to your specific interests and career goals. Sustainable Process and Materials Engineering option In the Sustainable Process and Materials Engineering option emphasis is placed on reliable technology that meets today's needs without jeopardising the welfare of future generations. This implies that materials and energy must be used efficiently, taking into account their impact on the environment. Thus, on the one hand this option is aimed at sustainable designing, development, and manufacturing of products and systems, and on the other it is aimed at development, properties, characterisation, production and processing of (new) materials. This is an initial master's programme and can be followed on a full-time or part-time basis. Add an in-company or project-based learning experience to your master's programme You can augment your master's programme with the Postgraduate Programme Innovation and Entrepreneurship. This programme is made up by a multifaceted learning experience in and with a company, with an innovative engineering challenge as the central assignment. It is carried out in a team setting, has a distinct international dimension, and usually requires a multidisciplinary approach. Entrepreneurs and students alike are encouraged to innovate, transfer knowledge and grow. It is a unique cross-fertilisation between company and classroom. Profile Are you a future industrial engineer? Are you a doer and are you fascinated by how and why things are done? Then you must be a future industrial engineer! - You enjoy looking into how to implement new ideas and improve old ones; - You prepare abstract designs for implementation in a business environment; - You like to link theory to practice; - You aim for a position of responsibility that allows you to apply your knowledge to concrete challenges in the day-to-day workings of a company; - You are eager to develop excellent communication and management skills. Objectives The Master of Industrial Sciences in Chemical Engineering is capable of: selecting, formulating, analyzing and answering appropriately a research question of his own choice based on a theoretical or practical problem in his area of technology while taking into consideration the paradigms and making use of appropriate research methodology. designing, implementing, testing, and improving industrial processes in a chemically and technologically responsible manner. researching, developing and applying new materials such as polymers, composites, metals and ceramics. integrating environment and safety in the various phases of a process supported by the principles of sustainable development. managing technology and communicating efficiently the results of his own work, study and research. continuing the process of self-education as well as coaching others in their development as individuals and professionals. integrating relevant research, work and/or study experiences acquired in a different environment either at home or abroad. functioning and cooperating in multidisciplinary and international teams through project work and through an exchange of views and opinions. recognizing and taking into consideration the ethical, economic, ecological and aesthetic aspects and implications of his actions International Students Diversity and an open mind are vital elements in the international learning and work environment at the Group T campus. The student population, staff, and guests come from all corners of the world, turning our campus into a true intercultural nexus for bachelor- and graduate-level education, university-industry collaboration, innovation and professional development. Advantages for international students - All of our undergraduate and graduate degree programmes are offered in English. English is ubiquitous both inside and outside the classroom. If you've mastered English, you'll feel right at home. - Admission to our programmes is not based on an entrance exam. Anyone with the necessary background can apply. - An engineering degree from KU Leuven's Group T campus is a stepping stone to universities and businesses worldwide. Our international network ensures that your degree is recognised by educational institutes and companies in Europe and across the globe. - Leuven is one of Europe's oldest university towns and is located in the heart of Western Europe - just 20 minutes from Brussels, and within easy reach of Paris, Amsterdam, and London. - Tuition fees are markedly lower than those of comparable universities in the US or the UK. Also, Leuven is a mid-sized university town, so cost-of-living expenses tend to be lower than those of other university towns. - The International Office at KU Leuven, Group T Campus has years of experience in welcoming international students from universities worldwide. [-]

Master in Industrial Management

KTH Royal Institute of Technology
Campus September 2017 Sweden Stockholm

The Master of Science programme in Industrial Management is designed for students with a profound engineering background who aim to take leadership positions in industrial and technology- based organisations. [+]

Master in Industrial ManagementThe Master of Science programme in Industrial Management is designed for students with a profound engineering background who aim to take leadership positions in industrial and technology- based organisations. Programme outlineThe main focus of theM programme is understanding the creation of value for customers. We address this issue at three different levels: ffirstly, the industry level, where the focus of attention is the economic and technical transformation in national and global markets. Secondly, the firm level, which focuses on the management of value-creating functions and processes such as research and development, operations and sourcing, and marketing and distribution. Thirdly, the individual level, which focuses on leading people in change.... [-]


Master of Engineering Management

United Arab Emirates University, College of Engineering
Campus September 2017 United Arab Emirates AL Ain

Engineering Management is the Process of Planning, Organizing, Staffing, leading and influencing People and Controlling Activities which have a Technological Component. [+]

Best Part time Masters in Industrial Management 2017. Engineering Management is the Process of Planning, Organizing, Staffing, leading and influencing People and Controlling Activities which have a Technological Component. These functions require foundation skills from engineering managers to manage themselves, staff, teams, projects, technologies and global issues of importance. These requirements being partly technical and partly business related, the Colleges of Engineering, and Business and Economics got together and launched the program in 2006. The program focuses on product development, process management, Quality Engineering and Project management from the technical side and leadership, management of technical innovations, supply chain, finance and decision making from the business side. The knowledge and skills thus gained are integrated through an action project. Program Objectives Management decision-making skills. Professional leadership and management skills. Knowledge of cost, financial and economic analysis. Knowledge about management of existing and emerging technologies. Continued intellectual growth in the engineering field. Program Learning Outcomes Upon successful completion of this program, students will be able to: Understand the designing process and synthesize strategies to manage designing an overall engineering system or product that meets desired needs. Apply knowledge of mathematics, engineering and technology in managing engineering processes. Analyze engineering problems relating to Quality and manufacturing operations and Synthesize Solutions. Understand supply chain concepts and apply them to improve the business’ overall and supply chain performance Apply concepts to manage technological innovations and synthesize relevant business strategy. Apply the accounting information for decision-making Apply knowledge of applied statistics and decision techniques in managing engineering processes. Analyze subjects with technical and business content and synthesize effective written reports and oral presentations Apply theories of human behavior to analyze and evaluate the role of managers and leaders in driving effective employee behaviors in industrial organizational contexts. Degree Requirements Required Credit Hours : minimum 33 hours Engineering Management Required Courses (33.00 hours) Credit Hours ACCT603 Management Accounting & Financial Analysis 3.00 MEME621 Operations Research for Engineers 3.00 MEME635 Engineering Project Management 3.00 MEME651 Quality Engineering 3.00 MEME661 Engineering Process Management 3.00 MEME676 Product Development and Marketing 3.00 MEME685 Action Project (Capstone) 3.00 MGMT675 Management and Leadership 3.00 MIST625 Management of Technology and Innovation 3.00 SCML655 Supply Chain Management 3.00 STAT609 Decision Techniques and Data Analysis 3.00 [-]

Master’s Programme in Industrial and Employment Relations

Turin School of Development
Online & Campus Combined October 2017 Italy Turin

It aims at developing specialized multidisciplinary knowledge in the field of industrial and employment relations from a comparative viewpoint. [+]

OBJECTIVES General objective Participants will be exposed to international and comparative industrial and employment relations systems with a view to better understanding the implications for the industrial relations systems of today. Specific objectives At the end of the Master’s Programme, participants will be able to: describe the industrial and employment relations systems with a comparative approach; apply tools and methodologies for effective labour-management relations at different levels of the economy from enterprise to the national and international level; advise government, employers’ and workers’ representatives on industrial and employment relations issues. PARTICIPANTS’ PROFILE AND REQUIREMENTS Participants' profile government, workers’ and employers’ representatives; practitioners in the field of industrial and employment relations from the public and private sectors; human resources managers; personnel in human resources departments dealing with industrial and employment relations; labour administration and labour inspection officials; staff from international organizations and United Nations agencies; ILO staff from field offices and technical cooperation projects; graduate students and researchers. Participants' requirements for the Master’s Programme a first university degree (BA) of minimum three years duration;* working knowledge of spoken and written English; ability to use computers and access to the internet. STRUCTURE, METHODOLOGY, CONTENT AND RESOURCES The Master’s Programme will be divided into three phases: Phase 1: Distance-learning from October 2016 to January 2017 (15 weeks) Phase 2: Residential face-to-face phase at the ITCILO campus in Turin from January to April 2017 (12 weeks) Phase 3: Preparation of Master’s thesis from April to September 2017 (21 weeks) Phase 1 includes assignments, self-study and exercises with the assistance of a tutor. Participants will have access to an online platform through which they will learn on an individual basis. They will receive support from tutors with expertise in the subject matter; participate in a forum; use the documentation centre, and network with other participants. This preparatory phase will enable participants with different levels and fields of knowledge to be introduced to the fundamentals and basic concepts relating to industrial and employment relations to reach an adequate and homogeneous level to take full advantage of the residential phase. Phase 2 - the residential phase in Turin - will focus on the following topics: International labour standards and industrial relations Legal sources and institutional framework of industrial and employment relations in Europe Workers’ and employers’ organizations: structure and role Social dialogue and tripartism Collective bargaining machinery; administration and implementation of collective agreements Settlement of labour disputes: conciliation, mediation, arbitration and labour courts Information and consultation at the enterprise level Labour administration and labour inspection Industrial relations systems, competitiveness and public policy Globalization and industrial and employment relations Recent trends in human resources management policies Workplace relations Professors, practitioners and other resource persons will use lectures, case-studies, case law judgments, excerpts of collective agreements and legislation, discussions, group-work and practical exercises to strike a balance between theory and practice and to stimulate interaction with the resource persons and among participants. Phase 3: participants will be required to carry out individual research in their home country for the preparation and submission of their thesis, assisted at a distance by tutors and/or professors. The outline of the thesis to be presented in Turin by April 2016 and completed before September 2016. Study visits Study visits to selected local enterprises will be organized during the face-to-face phase in Turin to provide an opportunity to participants to be exposed to different practices of industrial and employment relations. Documentation Participants will receive documentation to expand their knowledge of the topics. A bibliography and links section will be incorporated into the virtual platform for the distance-learning phase. Faculty The faculty will be selected for its professional experience and subject knowledge. It will consist of academic resource persons and practitioners: Professors from the University of Turin and other renowned universities; ILO and ITCILO experts; Specialist tutors who will support and interact with the participants throughout the programme. DEGREE A first level Master’s Degree from the University of Turin (60 certified university credits) will be issued. The degree will be awarded to the participants who fulfill all of the following conditions: the administrative requirements and documents required by the University of Turin; attendance of training sessions during the residential phase (only participants with at least 95% attendance will be entitled to apply for the degree); submit the assignments within the set deadlines and quality requirements; pass the prescribed examinations demonstrating the level of competence required by the Scientific Committee. PARTICIPATION IN THE MASTER’S PROGRAMME Tuition fees: 8,000 Euros payable by the participant or his/her sponsoring organization. This covers tuition, use of training facilities and support services, routine medical care and medical insurance. Applications for the Master’s Programme Candidates interested in participating in the Master’s Programme should complete and submit the online application form available on this link: http://intranetp.itcilo.org/MSTF/A978534/en Eligibility criteria The selection of participants for the Master’s Programme, as well as the award of partial scholarships, will be made by a Selection Committee consisting of ITCILO and the University of Turin representatives. The selection criteria will include academic and professional qualifications, experience, organization, country of origin, and gender balance. Deadline for applications: 21 August 2015 [-]

Masters Programme in Mechanical Engineering

Sapienza University of Rome
Campus 2 years October 2017 Italy Rome

The Master of Science in Mechanical Engineering aims at training young engineers with an advanced education, providing them with skills in designing, planning and managing complex activities of research and development in an industrial environment. This goal is achieved by means of a broad training proposal based on advanced mathematics and physics, [+]

Best Part time Masters in Industrial Management 2017. The Master of Science in Mechanical Engineering aims at training young engineers with an advanced education, providing them with skills in designing, planning and managing complex activities of research and development in an industrial environment. This goal is achieved by means of a broad training proposal based on advanced mathematics and physics, and professional expertise targeted to the solution of complex engineering problems concerning design of processes, plants, systems, devices, machines. Engineering Design professionals educated at Sapienza can work as technology specialists in a wide range of fields, including manufacturing, mechatronic, transportation (automotive, naval, aeronautical and railroad), conventional and renewable energy production, biomechanics and many others. In these settings mechanical engineers are responsible for design, testing, manage, research and development services. The present Mechanical Engineering Course keeps the educational spirit and objectives since the origin of Mechanical Engineering in the most modern sense, during the industrial revolution in the eighteenth century. This continuity to the tradition is combined with the innovation in the didactic approaches, designed to transfer the research know-how of the academic staff in a continuous improvement of teaching experiences and methodologies. Becoming a “Mechanical Engineer” still gives an education of international relevance, and studying in Rome warrants the possibility of living a vivid industry-related cultural experience. [-]

Master of Engineering: Industrial (optional Minor in Business)

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

Graduate programs in Industrial and Manufacturing Systems Engineering (IMSE) are designed to meet the clear and growing need for highly qualified personnel trained to have a deep appreciation for the important systems issues in manufacturing, to prepare candidates for an academic career in teaching and research or leadership roles in industrial research and development and academia. [+]

MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. Graduate programs in Industrial and Manufacturing Systems Engineering (IMSE) are designed to meet the clear and growing need for highly qualified personnel trained to have a deep appreciation for the important systems issues in manufacturing, to prepare candidates for an academic career in teaching and research or leadership roles in industrial research and development and academia. The objective of this program is to impart the required multi-disciplinary education and skills in an environment that fosters excellence in research and awareness of the many challenges of modern Industrial and modern Manufacturing Systems. General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. Program Requirements An MEng Degree may be awarded upon successful completion of a total of 8 courses (the MEng has no research component/thesis/work with a faculty supervisor). Of these 8 courses ... 5 to 8 must be from the student's department (major; electrical, electrical-computer, mechanical, materials, industrial, environmental, civil) 0 to 3 may be from another engineering department 0 to 2 may be from a department outside of engineering Co-op work experience is optional [-]

MTech in Industrial Engineering (Research - based)

University of Johannesburg
Campus Part time 1 - 2 years February 2017 South Africa Johannesburg

This qualification is intended to allow graduates to apply integrated operations techniques, together with advanced analysis and problem-solving, to a particular specialisation in the field of Industrial Engineering/Operations Management, through involvement in an applied research project. [+]

Best Part time Masters in Industrial Management 2017. This qualification is intended to allow graduates to apply integrated operations techniques, together with advanced analysis and problem-solving, to a particular specialisation in the field of Industrial Engineering/Operations Management, through involvement in an applied research project. Qualification outcomes and assessment criteria Conduct research and development in a specialised area and engage in the transfer of technology in the field of Industrial Engineering or Operations Management. Admission requirements and selection criteria A Baccalaureus Technologiae: Industrial Engineering, or an equivalent qualification of an equivalent standard. Conferment of the degree The MTech: Engineering: Industrial will be conferred on students who have completed the dissertation successfully. [-]