Master's Degree in Engineering in Stockholm in Sweden

Compare Masters Programs in Engineering 2017 in Stockholm in Sweden

Engineering

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Improvements made to manmade things such as tools, structures and machines are largely due to the efforts of people in the field of engineering. These people combine creativity with mathematics and worldly knowledge, resulting in innovation.

 

Sweden, officially the Kingdom of Sweden, is a Scandinavian country in Northern Europe. Sweden borders Norway and Finland, and is connected to Denmark by a bridge-tunnel across the Øresund. Sweden is a developed post-industrial society with an advanced welfare state. The standard of living and life expectancy rank among the highest in the world.

Being the largest city in Sweden, Stockholm has over 1.3 million people in the urban area. The city comprises of several Islands and it is the capital city of Sweden. Stockholm has over 10 universities and colleges.

Request Information Master's Degrees in Engineering in Stockholm in Sweden 2017

Read More

Master in Turbomachinery Aeromechanic University Training THRUST

KTH Royal Institute of Technology
Campus Full time 2 years September 2017 Sweden Stockholm

The joint Master's programme in Turbomachinery Aeromechanical University Training (THRUST) is a cooperation between KTH, Duke University, Aristotle University of Thessaloniki and Université de Liège. The programme offers education of high [+]

Masters in Engineering in Stockholm in Sweden. The joint Master's programme in Turbomachinery Aeromechanical University Training (THRUST) is a cooperation between KTH, Duke University, Aristotle University of Thessaloniki and Université de Liège. The programme offers education of high international standard as well as cultural experience from at least two different countries and a double degree from two universities. Energy and propulsion are much needed systems in the world for most modern human activities and social development for a sustainable society. Turbomachines produce more than 90% of all electricity in the world, drive the majority of aircrafts and are used extensively as compressors, pumps, etc. in many modern applications (e.g. refrigerators, ventilators, etc). Programme outline The programme is highly integrated, first of all regarding student and teacher mobility for certain common lectures, but also related to the extended use of remote teaching by the specialist teachers at all four universities, in conjunction with “face-to-face” and “virtual” interactive workshops and project courses. The educational programme THRUST offers a unique, modern and highly interactive learning material which enhances the student learning process. This, together with the “remote learning” aspects, will also allow for a substantial potential for already active industrial persons to participate in the programme as part of the life-long learning inside their respective companies. Given the nature of the subject of aeromechanics, multidisciplinary skills are fostered. Career prospects The THRUST programme offers the students a worldwide unique education at a high academic level, involving researchers/teachers at three European and one US... [-]

Master in Engineering Mechanics

KTH Royal Institute of Technology
Campus Full time 2 years September 2017 Sweden Stockholm

The field of Engineering Mechanics includes all areas of the industrial design process that are based on advanced mechanical analysis of product behavior and functionality. The Master’s programme equips students with the knowledge and skills [+]

The field of Engineering Mechanics includes all areas of the industrial design process that are based on advanced mechanical analysis of product behavior and functionality. The Master’s programme equips students with the knowledge and skills required to focus on reliable and sustainable design by simulations and experiments. Programme outline The education within the three tracks – Fluid Mechanics, Solid Mechanics and Sound & Vibration – is conducted with involvement from industry and influenced by the latest research. Only one third of the courses are mandatory, so students can tailor the course structure to meet their individual aims. This is very useful for those interested in exchange studies. The theoretical courses are mixed with more applied project courses and the final degree project is often performed at a company in Sweden or abroad. Degree project The fourth semester is spent working on a five month degree project, where the student has the opportunity to investigate a specific area in-depth. The degree project is performed either in industry or at a university department, in Sweden or abroad. Students doing their degree project close to KTH may also take courses in parallel with their thesis work. Career prospects Students who graduate from the Engineering Mechanics programme will be proficient in fluid mechanics, solid mechanics and sound & vibration – areas that are tied to a multitude of industries. Graduates will find a wide range of job opportunities in research and development within industrial companies, consulting firms and research institutes, not only in mechanical... [-]

Master in Management and Engineering of Environment and Energy ME3

KTH Royal Institute of Technology
Campus Full time 2 years September 2017 Sweden Stockholm

Nowadays, environmental protection and sustainability within the chemical processing and energy industries are of major concerns. In a near future, experts predict that the energy demand will drastically increase, especially because of the spectacular [+]

Masters in Engineering in Stockholm in Sweden. Nowadays, environmental protection and sustainability within the chemical processing and energy industries are of major concerns. In a near future, experts predict that the energy demand will drastically increase, especially because of the spectacular industrial and economic growth of the emerging countries. In such a context, meeting the energy needs of society without serious adverse impacts on humanity and the environment is a world challenge. Whilst generating energy with minimal environmental impact falls within the broad scope of engineering, managing the demand for energy is in the realm of economics and social sciences. In most cases, these issues are interrelated and global solutions and strategies have to be found. The original feature of the ME3 Master's programme is to combine Energy and Environmental Process Engineering with Management and Social Sciences. It aims at offering a well-balanced education to future engineers and managers having the adequate skills to solve environmental and energy issues through an integrated approach, combining technological development and innovations together with the consideration of human, social and economic constraints. The ME3 Masters is thus addressed to engineers and managers, who will work in Europe or in other regions of the world, to monitor complex social-technical systems related to Environment and Energy. Changes in the programme may occur. [-]

Master in Engineering Physics

KTH Royal Institute of Technology
Campus Full time 2 years September 2017 Sweden Stockholm

The programme includes five tracks: Theoretical Physics, Subatomic & Astrophysics, Optical Physics, Nano Physics, and Biomedical Physics; each with compulsory, conditionally elective and elective [+]

Programme outline The programme includes five tracks: Theoretical Physics, Subatomic & Astrophysics, Optical Physics, Nano Physics, and Biomedical Physics; each with compulsory, conditionally elective and elective courses. The Biomedical Physics specialisation aims to develop the ability of physicists to interact with the life science disciplines, and offers suitable combinations of subjects, both for a career in industry, as well as for continued studies towards a PhD degree. In Nano Physics, a number of highly interesting current fields are treated, such as nano structures, nano magnetism & spin electronics, superconductivity and other phenomena with very special properties. Optical Physics is important in basic and applied research, as well as in industrial applications; students with a thorough knowledge of this field are much sought after as PhD students, as well as for positions in industry and consulting. The Subatomic and Astrophysics specialisation covers a selection of topics at the frontline of contemporary physics; both the experimental and theoretical aspects of atomic, nuclear, and particle physics with applications to astrophysics are included. The Theoretical Physics specialisation provides the students with a broad education in fundamental theoretical physics, preparing them for a future as problem solvers or researchers in industry, or for continued PhD studies. Degree project The degree project may be carried out in an academic or industrial environment in Sweden or abroad, and suitable project topics may be obtained from the staff at the three physics departments. Students are also encouraged to seek other contacts in the academic field or within the... [-]

Master in Production Engineering and Management

KTH Royal Institute of Technology
Campus Full time September 2017 Sweden Stockholm

The Master's programme in Production Engineering and Management is designed to provide production knowledge and skills with a holistic perspective. [+]

Master in Production Engineering and Management The Master's programme in Production Engineering and Management is designed to provide production knowledge and skills with a holistic perspective. After graduating from the programme, students will have:Basic understanding of various dimensions and functions of the broad field of production.Analytical skills needed to tackle the ever-changing problems and situations of modern competitive production.Conceptual and reasoning skills with appropriate decision support methods and tools used in production management.Communication and presentation skills necessary for leadership positions. Understanding of how environmental and cultural differences effect the production process.Understanding of the need and requirements for sustainable and energy efficient production processes.Programme outlineThis programme will provide a strong foundation on which a professional engineering career can be built, as both engineering and management aspects of production and their integration are covered. The engineering side includes operation and integration of manufacturing equipment, automation technology, production development tools and methods and software used by engineers. The managerial side covers systematic decision-making, operations strategy, planning, control and management of resources during development and operations of manufacturing systems. The programme has four focus areas: Pproduction Development, Pproduction Management, Iindustrial IT Systems, and Iindustrial Joining. There is a set of mandatory courses for all students of the programme, and courses pertaining to each focus area. Moreover, students have the possibility to combine further elective courses on an individual basis.Degree projectTopics for degree projects are selected within the four focus areas. The projects can be carried out in cooperation with the department’s research groups, with... [-]


Master in Engineering Design

KTH Royal Institute of Technology
Campus Full time September 2017 Sweden Stockholm

The Master’s programme in Engineering Design educates engineers by promoting excellent technical and organisational skills in product development, engineering and design of complex and innovative products. Students of the programme will choose one of three [+]

Master in Engineering DesignThe Master’s programme in Engineering Design educates engineers by promoting excellent technical and organisational skills in product development, engineering and design of complex and innovative products. Students of the programme will choose one of three specialisations: Machine Design, Mechatronics or Combustion Engines.Programme outlineThe programme is structured to enhance technical skills, as well as to give an introduction to various aspects of engineering design. The specialisations include a set of advanced courses which are compulsory and constitute two-thirds of the total course work.The first semester consists of basic courses in engineering design, modelling, programming (Mechatronics track), robustification (Machine Design track) and combustion technology (Combustion Engineering track). The second semester consists of advanced courses within your specialisation, and voluntary courses. During the third semester a large industrial project is the basis for an advanced course within your selected field. The programme concludes with a thesis project that can be performed in either an industrial setting or in an academic environment. Each student is encouraged to actively search for a suitable thesis project in industry, and KTH will provide information on helpful points of contact.Degree projectThe thesis project is supervised by an experienced researcher and can be performed in an industrial setting or in an academic environment. Exchange students are recommended to find a thesis project in their country of permanent residence or where they intend to begin a professional career.Career prospectsEngineering Design professionals educated at KTH work in a wide range of fields: as technology specialists at large industrial... [-]


Master in Aerospace Engineering

KTH Royal Institute of Technology
Campus Full time 2 years September 2017 Sweden Stockholm

The main objective of the Master’s programme in Aerospace Engineering is to educate skilled engineers for the European aerospace sector. [+]

Masters in Engineering in Stockholm in Sweden. The main objective of the Master’s programme in Aerospace Engineering is to educate skilled engineers for the European aerospace sector. Graduates of the programme will possess solid theoretical skills in aerospace modelling, analysis and design, as well as the ability to approach and solve complex engineering tasks, and the experience of working in a team. They will also be adept at communicating effectively and working within an international environment – skills that translate to global career opportunities. Aerospace Engineering at KTH The Aerospace Master's programme at KTH is very international, with contacts and students from all over the world. Programme director is an astronaut and alumni of KTH, Christer Fuglesang. The first semester consists of a set of courses to enhance basic skills, as well as give an introduction to various aspects of aerospace engineering. The basic courses are compulsory and constitute almost one third of the course work. The student then chooses one of four tracks for further specialisation – Aeronautics, Space, Systems or Lightweight Structures. Each track has a few compulsory courses, but most are optional out of a set of recommended courses. There are many possibilities to combine courses between the tracks. Career The employment market for European aerospace engineers is strong and will remain so for the foreseeable future. Airbus is the main European aerospace company in the civil sector, however a large part of the work is performed at various subcontractors all over Europe and worldwide. The space... [-]