Master's Degree in Engineering & Technology in Brno in Czech Republic

Compare Masters Programs in Engineering & Technology 2017 in Brno in Czech Republic

Engineering & Technology

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Studies in engineering and technology prepare you for the technologically oriented workforce of today.

Members of the workforce with engineering and technology training are sought out by many industries including medical research and computer software development.

 

Czech Republic has a well-established and research based university education. This has made learning ini Prague one of the respected curriculum's in Europe since it cultivates the spirit of creativity and innovation among students.

This city has produced prominent people; the founder of genetics Gregory Mendel has a university named after him. However, the city has that challenge still, and it’s striving through its higher education institutions, to produce other Mendels who can have an impact to the community.

Request Information Master's Degrees in Engineering & Technology in Brno in Czech Republic 2017

Read More

Master in Applied Sciences in Engineering

Brno University of Technology
Campus Full time September 2017 Czech Republic Brno

Two-year follow-up master's study programme "Applied Sciences in Engineering" is designed for graduates from bachelor's study programmes majoring in applied sciences. [+]

Masters in Engineering & Technology in Brno in Czech Republic. Applied Sciences in Engineering Master's study programme: M2A-A Applied Sciences in Engineering Guarantor of the programme: prof. RNDr. Radim Chmelík, Ph.D. Academic year: 2017/18 Type of study: full-time Language of instructions: English (change to Czech) Standard length of study: 2 years Qualification awarded: Ing. Educational and professional goals: Two-year follow-up master's study programme "Applied Sciences in Engineering" is designed for graduates from bachelor's study programmes majoring in applied sciences. It is a university study providing students with wide and deep theoretical as well as practical knowledge in the selected specialised branch. The list of all branches can be found on the faculty website ("Study plans"). Graduates may work e.g. in research and development fields, design and technology, manufacture and operation, as well as management, trade and services. They may occupy positions such as designers, members and leaders of development teams, project managers and the like. Career prospects depend on the selected branch of study. Admission requirements and access to further studies: Condition for admitting is obtaining a bachelor's degree. The graduates may continue in a doctoral study programme. Examination and assessment regulations, required practice: The respective rules and conditions are specified by the Dean's Regulation No. 7/2011. Required practice and its length may be specified by study plans. Conditions required in the course of study and the duly completion: Students have to complete all compulsory and compulsory-optional courses required by study plans (at least of 120 credits). Further conditions are... [-]

Master in Mechanical Engineering

Brno University of Technology
Campus Full time 2 years September 2017 Czech Republic Brno

Two-year follow-up master's study programme "Mechanical Engineering" is designed for graduates from general branches of bachelor's study programmes majoring in engineering. [+]

Mechanical Engineering Master's study programme: M2I-A Mechanical Engineering Guarantor of the programme: doc. Ing. Radek Knoflíček, Dr. Academic year: 2016/17 Type of study: full-time Language of instructions: English (change to Czech) Standard length of study: 2 years Qualification awarded: Ing. Educational and professional goals Two-year follow-up master's study programme "Mechanical Engineering" is designed for graduates from general branches of bachelor's study programmes majoring in engineering. It is a university study providing students with wide and deep theoretical as well as practical knowledge in the selected specialised branch. The list of all branches can be found on the faculty website ("Study plans"). Graduates may work e.g. in research and development fields, design and technology, manufacture and operation, as well as management, trade and services. They may occupy positions such as designers, members and leaders of development teams, project managers and the like. Career prospects depend on the selected branch of study. Admission requirements and access to further studies: Condition for admitting is obtaining a bachelor's degree.The graduates may continue in a doctoral study programme. Examination and assessment regulations, required practice: The respective rules and conditions are specified by the Dean's Regulation No. 7/2011. Required practice and its length may be specified by study plans. Conditions required in the course of study and the duly completion: Students have to complete all compulsory and compulsory-optional courses required by study plans (at least of 120 credits). Further conditions are given by the set of study rules. Final examination Final examination consists of master's thesis... [-]

Master in Electrical, Electronic, Communication and Control Technology

Brno University of Technology
Campus Full time 2 years September 2017 Czech Republic Brno

The master study programme provides the specialized university education to the graduates of the previous bachelor study in all engineering branches of small-power, as of high-power electrical engineering and electronics, communication technologies, cybernetics, control, and measurement techniques. [+]

Masters in Engineering & Technology in Brno in Czech Republic. Electrical, Electronic, Communication and Control Technology Abbreviation: EEKR-MN Level of course unit: Master's Faculty: Faculty of Electrical Engineering and Communication Academic year: 2017/2018 Title awarded: Ing. Qualification awarded: Ing. in the field "Electrical, Electronic, Communication and Control Technology" Level of qualification: Master's (2nd cycle) Accredited from: 20.7.2005 Accredited until: 31.7.2021 Specific admission requirements: Condition for admitting is obtaining a bachelor's degree. Profile of the programme: The master study programme provides the specialized university education to the graduates of the previous bachelor study in all engineering branches of small-power, as of high-power electrical engineering and electronics, communication technologies, cybernetics, control, and measurement techniques. Key learning outcomes: The programme is oriented into the preparation of specialists in electrical and electronic engineering with good knowledge in the design, construction, service, and applications of electrical and electronic devices and systems. The students are educated in various branches of applied electronics and communication techniques, teleinformatics, power electrical and electronic engineering, microelectronics and technology, and control and measurement techniques. The students dispose also with the needed knowledge of the higher mathematics, physics, theoretical electrotechnics, using and programing of computers, applied informatics, and also with the basic knowledge of foreign languages, economics, and management. As the efficient supplements of the obligatory education there are the elaboration of one individual technical project and final master work of the student. According to their concrete study branche, the graduates of the masterr programme can be applied in design, construction, application... [-]

Master in Audio Engineering

Brno University of Technology
Campus Full time 2 years March 2018 Czech Republic Brno

The study programme provides interdisciplinary studies for MSc degree in audio engineering. The programme focuses on the education of professionals - sound engineers and audio technicians with technical and artistic overview in the area of audio equipment, audio signal processing, music direction and studio practice. [+]

Audio Engineering Abbreviation: PU-AUD Length of Study: 2 years Programme: Audioengineering Faculty: Faculty of Electrical Engineering and Communication Academic year: 2016/2017 Accredited from: 20.10.2015 Accredited until: 1.11.2019 Profile of the branch: The study programme provides interdisciplinary studies for MSc degree in audio engineering. The programme focuses on the education of professionals - sound engineers and audio technicians with technical and artistic overview in the area of audio equipment, audio signal processing, music direction and studio practice. Students are educated in the field of audio electronics, studio equipment and digital audio signal processing, and gain practical experience in studio practice. The study of this branch can be commenced only after the students have successfully completed the bachelor’s degree programme and passed the bachelor’s final state examination, preferably in a programme oriented towards audio engineering or multimedia. Instruction is provided primarily by the Department of Telecommunications FEEC and the Faculty of Music of JAMU in Brno. A wide range of optional courses along with individual technical and artistic projects and the master’s final work enable students to focus more closely on the area of studio audio engineering, audio technology, audio signal processing and multimedia. Student can complement his theoretical knowledge by studying courses theoretical extension of the field of higher mathematics and physics. To extend the range of their knowledge the students select courses from other disciplines master's degree of the Faculty of Electrical Engineering and Communication (FEEC) BUT, as well as language courses and general education. Key learning outcomes: The graduate... [-]

Master in Civil Engineering

Brno University of Technology
Campus Full time 1 - 2 years September 2017 Czech Republic Brno

The Building Services specialisation in the Building Constructions branch of the trimestral consecutive master’s study programme Civil Engineering follows on from four-year bachelor’s courses of a similar technical nature. [+]

Masters in Engineering & Technology in Brno in Czech Republic. Civil Engineering Abbreviation: S Specialisation: Building Services Length of Study: 1.5 years Programme: Civil Engineering Faculty: Faculty of Civil Engineering Academic year: 2017/2018 Accredited from: 25.7.2007 Accredited until: 31.8.2023 Profile of the branch: The Building Services specialisation in the Building Constructions branch of the trimestral consecutive master’s study programme Civil Engineering follows on from four-year bachelor’s courses of a similar technical nature. During their studies, students extend their knowledge of the latest scientific and technical findings in the field of Building Constructions and from the Building Services specialisation. During their studies, students become familiar with the latest scientific and technical findings in all their complex mutual interconnectivity and are guided towards the performance of individual creative engineering work. They apply the knowledge acquired in the individual subjects in individually assigned engineering and technical tasks concerning the issues of the given field of study. During the course, great emphasis is placed on independent and creative engineering work. Key learning outcomes: Graduates from the Building Services specialisation of the Building Constructions course of study have gained highly specialised (theoretical and professional) knowledge in the studied field and specialisation. They are capable of applying the acquired knowledge in the solution of problems within the given field of study. They are capable, within the scope of the skills they have gained, of independently solving even demanding specialised problems (the independent solution of complex structural engineering and managerial problems in the construction industry), and are... [-]