Part time Master's Degree in Engineering Studies in United Kingdom

View Part time Master Programs in Engineering Studies in United Kingdom 2018

Engineering Studies

Master-level studies involve specialized study in a field of research or an area of professional practice. Earning a master’s degree demonstrates a higher level of mastery of the subject. Earning a master’s degree can take anywhere from a year to three or four years. Before you can graduate, you usually must write and defend a thesis, a long paper that is the culmination of your specialized research.

The field of engineering is one which uses mathematics, science and creativity in ways that result in inventions that improve the daily routines of people from all walks of life and in all professional fields.

The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom and Britain, is a sovereign state located off the north-western coast of continental Europe.The two most famous (and oldest) universities are Oxford and Cambridge (often referred to as Oxbridge by many Britons) England also has several other world-class institutions, including several in London (notably Imperial College, the London School of Economics, University College London and King's College London, all are part of London University)

Contact Schools Directly Best Part time Master Degrees in Engineering Studies in United Kingdom 2018

Read More

Master in Engineering

Across the Pond
Campus 1 year August 2018 United Kingdom Aberdeen Belfast Brighton Canterbury Cardiff Chester Cirencester Colchester Edinburgh Epsom Exeter Falmouth Farnham Glasgow Guildford Huddersfield Leeds Leicester Lincoln Liverpool London Loughborough Manchester Newcastle Norwich Nottingham Oxford Reading Rochester Sheffield + 28 more

Across The Pond partners with some of the top UK universities for engineering, across a variety of disciplines. The UK has long been a major contributor to the innovation of engineering, and students who study in the UK benefit from intensive learning, opportunities to find placements at major engineering companies, and a concentration on both academic skill and employability. [+]

STUDY ENGINEERING IN THE UK

Across The Pond partners with some of the top UK universities for engineering, across a variety of disciplines. The UK has long been a major contributor to the innovation of engineering, and students who study in the UK benefit from intensive learning, opportunities to find placements at major engineering companies, and a concentration on both academic skill and employability.

BENEFITS OF STUDYING ENGINEERING IN THE UK

Shorter courses: Most Master’s programs are only one year long. Students can obtain a degree in a shorter amount of time compared to studying in Latin America. Funding from Latin American countries for these subjects is also available. Focus: UK universities do not require general education courses; students will be focusing on engineering from Day 1! Employment opportunities: Many universities in the UK focus on having staff that are active in their fields, helping to provide an employability perspective and to generate learning opportunities outside of the classroom. Furthermore, many engineering courses offer the opportunity to take on a placement, whether as an additional year on their degree or as a short-term opportunity during their degree. Either way, UK engineering students graduate with readiness to work. ... [-]

Master in Software and Service Architectures (SSA)

EIT Digital Master School
Campus 2 years September 2018 United Kingdom London

The programme in Software and Service Architectures is an enhanced version of the previous programme on Service Design and Engineering and aims to educate the next generation of service designers and software architects capable of designing and engineering novel software systems to: (i) Drive digitalization of businesses, (ii) Create new businesses based on software intensive services, (iii) Be responsible for the elicitation and definition of what software products and services IT companies should create in order to be successful; (iv) Be responsible for the processes and methods for the effective development of modern software systems. [+]

Formerly known as Service, Design and Engineering SDE)

Why study the EIT Digital Software and Service Architectures programme?

The EIT Digital SSA programme offers:

Innovative and well-grounded education for the next generation of service designers and software architects. Studies at two of Europe´s foremost technical universities leading to a double degree. A good integration with tailored courses in Innovation and Entrepreneurship. A thesis work connected to interesting industrial challenges. Access to the competence of eight EIT Digital innovation action lines (link) not least through a summer school between the two years. Access to the co-location centres and innovation ecosystems of the nine EIT Digital nodes. What is the programme all about? ... [-]

MEng in Civil Engineering

City University of London
Campus 4 - 5 years September 2018 United Kingdom City of London

Studying MEng Civil Engineering at City, University of London equips students with the skills in design, construction, management and sustainability required for a successful future in the construction industry. [+]

Studying MEng Civil Engineering at City, University of London equips students with the skills in design, construction, management and sustainability required for a successful future in the construction industry.

Who is it for?

Our degree in Civil Engineering is a path for students to become a leader in tomorrow's complex world. City, University of London is committed to ensuring that its civil engineering graduates lead the way in technical expertise, strategic thinking, innovation and communication.

Objectives

Civil engineers develop infrastructure and have a profound effect on the way people live through a consideration of function, aesthetics, economics and sustainability.... [-]


MEng Systems Engineering

The University of Warwick, School of Engineering
Campus 4 years September 2018 United Kingdom Coventry

Our accredited Engineering degrees develop an in-depth understanding of the principles of engineering, with teaching from a wide range of automotive, civil, electronic, systems, manufacturing and mechanical engineering experts, and options to specialise in areas that interest you during your second year. [+]

What will I learn?

Our accredited Engineering degrees develop an in-depth understanding of the principles of engineering, with teaching from a wide range of automotive, civil, electronic, systems, manufacturing and mechanical engineering experts, and options to specialise in areas that interest you during your second year. These courses are led jointly by academics in the School of Engineering and WMG (Warwick Manufacturing Group). Interdisciplinary projects enable you to tackle challenges that could range from engineering a robot to rescue victims in a collapsed building, to designing and building a nano-satellite. You will develop sought-after skills including a multidisciplinary approach to problem-solving, the ability to manage projects and communicate ideas, and the capacity to lead, research, design, innovate and develop products and systems.... [-]


MEng in Mechanical Electronic Systems Engineering

Glasgow Caledonian University - The School of Engineering and Built Environment
Campus 3 - 5 years September 2018 United Kingdom Glasgow

Take the masters route and reach the academic levels of Chartered Engineer status. This five-year MEng course is accredited by the Institution of Mechanical Engineers. [+]

Accredited by: IMechE

Engineers are involved in a number of design and development activities. Mechanical Electronic Systems Engineering is a blend of mechanical engineering, computer-aided engineering, control engineering, systems design engineering and electronic engineering in order to design and manufacture useful products.

This programme, developed in partnership with industry, will produce well-rounded engineers able to exercise leadership, initiative, personal responsibility and decision-making in complex and unpredictable situations. You will have access to cutting-edge laboratories and equipment including CAD, CAM and FEA software, as well as to electrical, control systems and instrumentation and electronic laboratories. There is also the opportunity for a 48-week industry placement. The BEng (Hons) degree is accredited by the Institution of Mechanical Engineers (IMechE) as fulfilling the academic requirements for Chartered Engineer (CEng), with the addition of the MEng year or an accredited Masters degree. Successful completion of the BEng (Hons) degree allows transfer to the MEng.... [-]


MEng in Electrical, Electronic and Energy Engineering

Glasgow Caledonian University - The School of Engineering and Built Environment
Campus 2 years September 2018 United Kingdom Glasgow

Take the masters route and complete this MEng degree in just 3 years with a relevant HND. This five-year MEng course is accredited by the Institution of Engineering and Technology and the Energy Institute. [+]

Accredited by: IET EI

Year 3 entry only

The global demand for renewable and other energy technologies is increasing the need for engineering graduates with traditional electrical and electronic skills suitable for energy generation, distribution, instrumentation and telecommunications.

Recent industry and government reports highlight the strong need for renewable and energy technologies to be part of the skills set of electrical and electronic engineering graduates. Graduates will be ideally placed to capitalise on the significant and unprecedented growth in this area.

This programme is accredited by the Institution of Engineering and Technology (IET). The IET Accreditation is an internationally respected benchmark awarded to high-quality programmes that provide an ideal preparation for aspiring professional engineers.... [-]


MEng in Electrical and Electronic Engineering

Glasgow Caledonian University - The School of Engineering and Built Environment
Campus 3 - 5 years September 2018 United Kingdom Glasgow

Take the MEng route and complete the accredited Electrical and Electronic Engineering degree at the masters level. With flexible entry points at year 1, 2 and 3 this course offers valuable industry experience along the way. [+]

Accredited by: IET

The MEng / BEng Electrical and Electronic Engineering will prepare you to compete for a wide range of job opportunities in the UK and internationally. While gaining a broad understanding of emerging electrical and electronic engineering, and the engineering business environment, you'll also develop essential leadership, management and communication skills and the global perspective you need to excel in a career in engineering.

Rapid advancements in communications, sensor technologies, robotics, and high-speed electronics, combined with newer technologies such as machine learning and computer vision continue to revolutionise the world we live in.

Our programme provides you with the necessary skills and experience that will enable you to take your place in the fastpaced world of electrical and electronic engineering as a creator of next generation, intelligent, connected devices and systems.... [-]


MEng in Electrical Power Engineering

Glasgow Caledonian University - The School of Engineering and Built Environment
Campus 5 years September 2018 United Kingdom Glasgow

Apply directly to first, second or third year of this MEng degree. The Power Engineering MEng is accredited by the Institution of Engineering and Technology and the Energy Institute. [+]

Accredited by: IET EI

Climate change and economic drivers mean there is a strong move toward renewable energy from wind, wave and tidal sources - and correspondingly an increased demand for power system engineers.

This programme has been designed in collaboration with industry and has a strong emphasis on practical experience. It provides a broad education in electrical, mechanical and electronic engineering, alongside specialist modules in power engineering and power electronics.

You will have access to well-equipped computer-aided engineering and electrical and electronic laboratories with leading technologies, as well as the opportunity for two industry placements.... [-]


MEng in Computer-Aided Mechanical Engineering

Glasgow Caledonian University - The School of Engineering and Built Environment
Campus 5 years September 2018 United Kingdom Glasgow

Take the masters route and reach the academic levels of Chartered Engineer status. This five-year MEng course is accredited by the Institution of Mechanical Engineers. [+]

Best Part time Masters in Engineering Studies in United Kingdom. Accredited by: IMechE Computer-aided mechanical engineering is a blend of mechanical engineering, computer-aided engineering and systems design engineering. A form of 'virtual engineering', it allows engineers to test new products or systems without having to build expensive prototypes. This programme has been designed with industry input and uses standard industry software (such as PTC Creo for 3D modelling and manufacturing simulation and ANSYS for Finite Element Analysis) to give you an understanding of the fundamental principles of engineering - design, control, materials and manufacturing methods - as well as learning how to provide solutions to complex engineering problems. All of GCU's Engineering Programmes are accredited by UK Standard for Professional Engineering Competence (UK-SPEC) and we have excellent links with industry, providing access to case studies, projects and work experience. All MEng pathways within the Engineering Suite satisfy the academic requirements required for Chartered Engineer (CEng) status. Accredited by the Institution of Mechanical Engineers (IMechE), the programme meets/will contribute to the academic requirements for registration as a Chartered Engineer. Your career Graduates have found success in a variety of local, national and international industries and consultancies, such as mechanical, aerospace, electronics, offshore, local authority, manufacturing and building services. What you will study Year 1 Broad-based and solid coverage of the Fundamentals of Engineering. Year 2 Thermodynamics & Fluid Mechanics, Engineering Design & Analysis, Mathematics, Integrated Engineering Studies, Control & Instrumentation Systems, Manufacture & Materials, Electrical Systems. Year 3 Computer-Aided Engineering, Energy... [-]

MRes Electrical and Electronic Engineering

The University of Nottingham - Faculty of Engineering
Campus 1 year September 2018 United Kingdom Nottingham

The Electrical and Electronic MRes is project-based, studied over one academic year. A project worth between 130-160 credits is undertaken throughout a full academic year. In addition, students gain essential knowledge and skills to their projects by studying relevant taught modules. [+]

You will be taught using the latest advances in teaching methods and electronic resources, as well as small-group and individual tuition.

Applicants require a 2.1 or international equivalent and/or a masters at merit level or above in a relevant subject, as well as an IELTS level 6.0 (5.5 in each element). Particular features of the programme include:

one-to-one tuition with expert members of staff teaching informed by active leading-edge researchers in the field innovative and engaging teaching modules access to many online resources flexibility in course content

Facilities

Our facilities are outstanding and include a Gigahertz transverse electromagnetic cell, an RF anechoic chamber, an optical materials evaluation system lab, an RF lab, a photoluminescence lab, optics and ultrasonic labs comprising multiple optical benches, semiconductor clean rooms, power electronic module packaging facility, 270 kVA variable frequency ac supply, dynamometer testing to 800 kW and 120,000 rpm, and environmental testing including temperature, altitude, humidity and vibration.... [-]


Master in Prototyping Future Cities

Higher School of Economics
Campus 2 years September 2018 United Kingdom London Canterbury

The programme will focus on the issues of urban planning and management using new city models and technologies. It will be led by international and Russian scholars and experts who are forming the current agenda for smart city development in Russia and worldwide. [+]

The programme will focus on the issues of urban planning and management using new city models and technologies. It will be led by international and Russian scholars and experts who are forming the current agenda for smart city development in Russia and worldwide. The key principle of the programme is learning by doing. The programme will take place in a laboratory-type environment where students will try new technology, prepare prototypes, investigate and analyse the city through data, and develop projects that come as a relevant response to complex problems that affect modern cities.

The programme invites architects, designers, engineers, economists, entrepreneurs and graduates interested in the management of cities and technologies. The skills acquired during the programme will provide the graduates with a variety of career opportunities in large technological companies, city administrations or their own innovative businesses.... [-]


MEng Mechanical Engineering

The University of Warwick, School of Engineering
Campus 4 - 5 years October 2018 United Kingdom Coventry

Mechanical systems, mechanisms and machines lie at the heart of our traditional engineering industries. The skills and techniques associated with them continue to be essential. [+]

What will I learn?

Mechanical systems, mechanisms and machines lie at the heart of our traditional engineering industries. The skills and techniques associated with them continue to be essential. In recent years these have extended into the areas of precision engineering, nanotechnology, and mechatronics, as mechanical engineers have broadened their skill sets and embraced technologies from other disciplines to solve difficult problems.

Our courses take a multidisciplinary approach to engineering challenges. Led by experts in the School of Engineering and WMG (Warwick Manufacturing Group) we provide opportunities to learn from leading researchers in areas such as precision mechanics, fluid dynamics and sustainable thermal energy technology, as well as complementary areas in other fields of engineering. We also work with many of the country’s leading companies. This collaboration feeds back into our research, informs our teaching and helps us to keep our courses at the forefront of industry best practice.... [-]


MEng Manufacturing and Mechanical Engineering

The University of Warwick, School of Engineering
Campus 4 - 5 years October 2018 United Kingdom Coventry

Manufacturing and Mechanical engineers are creative problem solvers and require vision to work with a range of other engineers in the development of innovative and cost-effective products [+]

What will I learn?

Globally, manufacturing is a key provider of wealth and employment. Manufacturing and mechanical engineers apply their creativity, skills and vision to work with a range of other engineers in the development of innovative and cost-effective products.

As a manufacturing and Mechanical Engineer, you’ll master modern technologies and skills such as robotics, computer-aided design and simulation. We offer you a rich curriculum and the resources to achieve this, accredited by the Institution of Engineering and Technology, and the Institution of Mechanical Engineers. We will give you a significant understanding of management techniques and skills alongside these technical subjects.... [-]


MEng Engineering

The University of Warwick, School of Engineering
Campus 4 - 5 years October 2018 United Kingdom Coventry

Our accredited Engineering degrees develop an in-depth understanding of the principles of engineering, with teaching from a wide range of automotive, civil, electronic, systems, manufacturing and mechanical engineering experts, and options to specialise in areas that interest you during your second year. [+]

What will I learn?

Our accredited Engineering degrees develop an in-depth understanding of the principles of engineering, with teaching from a wide range of automotive, civil, electronic, systems, manufacturing and mechanical engineering experts, and options to specialise in areas that interest you during your second year. These courses are led jointly by academics in the School of Engineering and WMG (Warwick Manufacturing Group). Interdisciplinary projects enable you to tackle challenges that could range from engineering a robot to rescue victims in a collapsed building, to designing and building a nano-satellite. You will develop sought-after skills including a multidisciplinary approach to problem-solving, the ability to manage projects and communicate ideas, and the capacity to lead, research, design, innovate and develop products and systems.... [-]


MEng Electronic Engineering

The University of Warwick, School of Engineering
Campus 4 - 5 years October 2018 United Kingdom Coventry

Electronic systems play a vital role in almost all aspects of our everyday life and are the power of the 'information revolution' that is increasingly impacting on all our lives [+]

What will I learn?

This course is for you if you are looking for an accredited Electronic Engineering degree that develops your specialist knowledge in the field while working in multidisciplinary teams. Our joined-up, research-oriented approach to learning supports personal development and provides key skills that are aligned with best commercial practices – and much sought after by leading employers. This enables our graduates to contribute within a variety of sectors, such as microelectronics, design and production, energy, transport, the built environment, information and communications.

You’ll learn through lectures, tutorials, example classes, face-to-face contact with academics for resolving module queries, laboratories, coursework assignments and projects. Practical work in electronics starts from the first year with the third-year individual project and fourth-year multidisciplinary group project forming major parts of your degree. State-of-the-art laboratories are equipped with software and instruments to support the varied teaching activities in electronic engineering. The course significantly benefits from our close links with industry.... [-]