Master's Degree in Engineering Studies in Loire-Atlantique in France

Find Masters Programs in Engineering Studies 2018 in Loire-Atlantique in France

Engineering Studies

A master's degree is a postgraduate academic degree. One must already have an undergraduate degree to apply for a master's program. Most master's degree program would require students to complete a master's thesis or research paper.

The process of creating and maintaining new machines, structures and more using mathematics as well as social, economic and scientific knowledge is known as engineering. There are many subdivisions of engineering dealing with everything from the environment to electricity.

 

France offers a superb higher education system to not only its citizens but also foreigners. The country's dynamic culture attracts foreign students and those interested in pursuing international courses. France has a tradition of scientific and technological innovation. This ensures that scholars fully utilize their creativity.

Request Information Master's Degrees in Engineering Studies in Loire-Atlantique in France 2018

Read More

Master in Embedded Real Time Systems (CORO ERTS)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This programme introduces the techniques currently used for the design and the verification of embedded systems, and more especially real-time embedded systems. This specialism relies on several courses covering various topics: the design of real-time systems and the architecture of a real-time operating system (OSEK/VDX standard is used); real-time scheduling policies and associated implementation; tools for the modeling and verification of real-time systems: Petri net, finite state automata and timed automata etc. [+]

This program introduces the techniques currently used for the design and the verification of embedded systems, and more especially real-time embedded systems. This specialism relies on several courses covering various topics: the design of real-time systems and the architecture of a real-time operating system (OSEK/VDX standard is used); real-time scheduling policies and associated implementation; tools for the modeling and verification of real-time systems: Petri net, finite state automata and timed automata etc.

The program of study lasts two academic years - denoted by M1 and M2. Embedded Real-Time Systems is one of five specialisms available within the Control and Robotics stream. Some of the M1 courses are the taught across the five specialisms whereas the M2 courses are specialism-specific. See course content for more details.... [-]


Master in Materials and Structures in their Environment (C-ENG MSE)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This Master programme aims to develop scientific and technological knowledge on materials and structures in both the public works and industrial sectors. It is characterized by a high degree of scientific specialisation. The programme focuses on the following specialised areas: numerical modelling, constitutive laws, structural reliability, advanced experimental techniques, durability, modern concrete, geomechanics and earthquake engineering. [+]

This Master programme aims to develop scientific and technological knowledge on materials and structures in both the public works and industrial sectors. It is characterized by a high degree of scientific specialisation. The programme focuses on the following specialised areas: numerical modelling, constitutive laws, structural reliability, advanced experimental techniques, durability, modern concrete, geomechanics and earthquake engineering.

The programme of study lasts two academic years - denoted by M1 and M2. M1 classes taught in English. The language of instruction for M2 is English and French.

Course Content - M1

Continuum Mechanics Physical Modelling Fluid Mechanics Constitutive Laws Programming and Algorithmics Imaging in Civil Engineering Numerical Methods Geotechnical Engineering Vibration and Differential Equations Concrete and Structures Business Environment Conferences and Initiation of Research Modern Languages ... [-]

Master in Embedded Real Time Systems (CORO ERTS)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This program introduces the techniques currently used for the design and the verification of embedded systems, and more especially real-time embedded systems. This specialism relies on several courses covering various topics: the design of real-time systems and the architecture of a real-time operating system (OSEK/VDX standard is used); real-time scheduling policies and associated implementation; tools for the modeling and verification of real-time systems: Petri net, finite state automata and timed automata etc. [+]

This program introduces the techniques currently used for the design and the verification of embedded systems, and more especially real-time embedded systems. This specialism relies on several courses covering various topics: the design of real-time systems and the architecture of a real-time operating system (OSEK/VDX standard is used); real-time scheduling policies and associated implementation; tools for the modeling and verification of real-time systems: Petri net, finite state automata and timed automata etc.

The program of study lasts two academic years - denoted by M1 and M2. Embedded Real-Time Systems is one of five specialisms available within the Control and Robotics stream. Some of the M1 courses are the taught across the five specialisms whereas the M2 courses are specialism-specific. See course content for more details.... [-]


Master in Atlantic Master on Ship Operation & Naval Engineering (M-TECH AMASONE)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This programme allows its students to develop skills in naval engineering and to become engineers experienced in ship operations. [+]

This programme allows its students to develop skills in naval engineering and to become engineers experienced in ship operations.

Two of the top French engineering schools - Centrale Nantes and the Ecole Navale Universities have teamed up to offer you a unique programme. An outstanding feature of this programme is that you will have on-board training sessions on French Navy vessels. You will get an insight into onboard practice to serve complex equipment and to fit in with the quick evolution of knowledge and techniques which is highly valuable for a naval engineer and of course highly regarded by industrial employers.

The programme of study lasts two academic years - denoted by M1 and M2. Courses are taught in English across the entire programme.... [-]


Master in Hydrodynamics for Ocean Engineering (MTECH HOE)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This master specialism aims to give students advanced training on typical problems of hydrodynamics applied to naval architecture and ocean engineering: ship resistance, seakeeping, ship behavior in irregular seas, water, waves and marine environment, physical, modeling and numerical aspects are studied. [+]

This master specialism aims to give students advanced training on typical problems of hydrodynamics applied to naval architecture and ocean engineering: ship resistance, seakeeping, ship behavior in irregular seas, water, waves and marine environment, physical, modeling and numerical aspects are studied.

The program includes theoretical courses on typical hydrodynamics problems: ship resistance, wave-induced motions, wave and marine environment modeling, and numerical methods used to solve these problems. A large part of the program is also devoted to the practical use of software to solve the problems cited above through a large variety of numerical methods: boundary elements or spectral methods under potential flow theory, finite-difference or finite-volume techniques in solvers for viscous flows, Smooth Particle Hydrodynamics (SPH). Students are also involved in practical work using the ocean test facilities (towing tank, wave tank equipped with a multi-flap wave generator etc.)... [-]


Master of Engineering in Advanced Manufacturing (M-ENG AM)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This Master program develops skills for providing innovative and optimized solutions in the advanced design and manufacturing of products and structures for both research and industry. [+]

This Master program develops skills for providing innovative and optimized solutions in the advanced design and manufacturing of products and structures for both research and industry.

The courses rely on both theoretical and practical aspects and cover the following areas: mechanical design of innovative mechanisms and products and customer-oriented design of products. Technical, human and economic factors are taken into account.

The program of study lasts two academic years - denoted by M1 and M2. Advanced Manufacturing is one of four specialisms available within the Mechanical Engineering stream.

The language of instruction is English across the two years.

The program was formerly entitled Design of Systems and Products.... [-]


Master on Ship Operation & Naval Engineering - AMASONE

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

Two of the top French Technical Universities have teamed up to offer you a unique opportunity to learn naval engineering and become an engineer experienced in ship operation. [+]

Master on Ship Operation & Naval Engineering

Two of the top French Technical Universities have teamed up to offer you a unique opportunity to learn naval engineering and become an engineer experienced in ship operation. At Ecole Centrale Nantes we provide a high-level naval engineer training program. You will have access to experimental facilities such as towing tank, wave tank, internal combustion engine test benches.

In collaboration with École Navale in Lanvéoc-Poulmic, close to Brest is the French Naval Academy where French Navy officers are trained. In Ecole Navale, we deliver a serious scientific training, navigation knowledge, and maritime environment. The outstanding strength of this master program is that you will have on-board training sessions on French Navy vessels. You will get an insight of onboard practice to serve complex equipment and to fit in with the quick evolution of knowledge and techniques which is highly valuable for a naval engineer and of course highly regarded by industrial employers. 100% English Master!... [-]


Master in Civil Engineering

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

The Master of Civil Engineering in Materials and Structures in their Environment is dedicated to developing scientific and technological knowledge. It is characterized by a high degree of scientific specialization. [+]

Master in Civil Engineering

This Master is internationally recognized and accredited by the French Ministry of Higher Education.

The higher vocation of our Master is designed to prepare students for research in the public and private sector.

Language of teaching

During the first year, all the courses are in English (French language courses are also included).

Characteristics

The programme focuses on the following areas: Advanced experimental methods and numerical modeling, concrete durability, structural reliability geotechnical engineering and earthquake engineering.

Objectives

The principal vocation of the Master of Civil Engineering is to develop scientific and technological knowledge.... [-]


Master in Hydrodynamics and Ocean engineering

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

The aim of this program is to give students and advanced training on typical problems of hydrodynamics applied to ocean and offshore engineering: ship resistance, seakeeping, water waves and marine environment. Physical, modeling and numerical aspects are studied. [+]

The Master in Hydrodynamics and Ocean engineering

This Master is internationally recognized and accredited by the French Ministry of Higher Education.

The quality of the courses has been recognized within the prestigious Erasmus Mundus framework of the European Commission through the EMship Master.

A large part of the training is dedicated to the practical use of software to solve problems defined above a large variety of numerical methods: boundary elements or spectral methods under potential flow theory, finite-difference or finite-volume techniques in solvers for viscous flows, Smooth Particles Hydrodynamics (SPH).

Language of teaching

The language of instruction and examination is English during the first year including 160 hours of French language courses.... [-]


Master of Engineering in Energetics and Propulsion (M-ENG EP)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This Master develops skills for designing and optimizing innovative propulsion plants with a focus on thermofluid processes and energy conversion for research and industry. [+]

Energetics and propulsion (M-ENG EP)

This Master develops skills for designing and optimizing innovative propulsion plants with a focus on thermofluid processes and energy conversion for research and industry.

The performance and efficiency of internal combustion engines and turbojets is influenced by various processes including gas flow, compression, and expansion through turbomachines or reciprocating piston, fuel injection and combustion, energy conversion and heat transfer. Therefore, the courses offered in this program will provide an emphasis on all these processes and how they interact.

The program of study lasts two academic years - denoted by M1 and M2. Energetics and Propulsion is one of four specialisms available within the Mechanical Engineering stream. The language of instruction is English throughout the program.... [-]


Master of Engineering in Materials Processes and Technology of Composites (M-ENG MPTC)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This Master develops skills for providing innovative and optimized solutions in the design and manufacturing of composite materials for research and in industry. [+]

Materials, Processes, and Technology of Composites (M-ENG MPTC)

This Master develops skills for providing innovative and optimized solutions in the design and manufacturing of composite materials for research and in industry.

The performance of fiber-reinforced organic-matrix composites and structures are influenced by the constituting materials and the processing stage. Composite mechanical design can be efficiently and optimally performed when one has a good understanding of manufacturing influences and constraints. Therefore, the courses offered in this program will provide a theoretical and experimental emphasis on the relationships between constituents, processing, and structural design.... [-]


Master of Engineering in Design of Systems and Products

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This Master provides tools, models, and methodologies for the design of mechanical products and for the design and management of industrial systems. [+]

Master of Engineering in Design of Systems and Products

This Master is internationally recognized and accredited by the French Ministry of Higher Education.

This Master provides tools, models, and methodologies for the design of mechanical products and for the design and management of industrial systems. Technical, human and economical factors are taken into account.The courses rely on both aspects and cover the following areas: Mechanical design of innovative mechanisms and products, a customer-oriented design of products, industrial engineering.

Language of teaching

The two year-courses are fully taught in English.

Laboratories

The thesis is often conducted in the frame of international research collaborations with scientists from Europe, the United States, Canada, Brazil, and Africa. The Master "Design of systems and Products" relies on the staff members on the scientific and research facilities of the IRCCyN, "Institut de Recherche en Communication et Cybernétique de Nantes"... [-]


Master of Engineering in Computational Mechanics (M-ENG CM)

Centrale Nantes
Campus Full time 2 years September 2018 France Nantes

This Master develops skills in advanced techniques in scientific computing at the interface between scientific disciplines for the modeling of mechanical engineering problems. [+]

Computational Mechanics (M-ENG CM)

This Master develops skills in advanced techniques in scientific computing at the interface between scientific disciplines for the modeling of mechanical engineering problems.

The courses cover the modeling and numerical simulation of complex mechanical systems (both fluid and solid) involving a possible coupling of different physics at different scales. The training is based on a global approach towards the issues associated with numerical modeling, from the construction of models and their discretization to the numerical resolution of discrete models, and to the mathematical analysis of models and approximation methods.

The program of study lasts two academic years - denoted by M1 and M2. Computational Mechanics is one of four specialisms available within the Mechanical Engineering stream.... [-]