The Master of Applied Science is a Research degree requiring a thesis. Students can specialize in any of the following areas: social issues in mining, mining engineering, mineral processing, mining and the environment, Rock mechanics, Mine Economics, Safety, Corporate Social Responsibility, etc.

Backed by an unparalleled reputation for expertise and innovation in mineral extraction, mineral processing and environmental protection, the graduate program in Mining Engineering has two types of students in mind:

The Master of Engineering in Civil Engineering (MEng) program is a non-thesis, course-based graduate program in Civil Engineering, and is available in the following areas of specialization:

Note that the specialization does not appear on the degree parchment or on the transcript.

Successful completion of the MEng degree requires the completion of 30 credits of coursework, subject to various constraints and requirements as provided below. For further information, please contact the Civil Engineering Graduate Support Office.... [-]

The Department has opened applications to its course based Master of Engineering (MEng) degree program. The Master of Engineering is a course-based program designed for engineers wishing to upgrade their training. During this 12-16 month program, students take a prescribed set of courses.

The MEng is not a research degree and is intended primarily for candidates who have work experience in addition to a bachelor's degree in Chemical and Biological Engineering. The degree requires 30 credits of advanced coursework, which are divided as follows:

The Master of Applied Science (M.A.Sc.) program is suited to students who wish to pursue a graduate degree in a thesis based research program. An M.A.Sc. is expected to take about 24 months. The MASc thesis is prepared with guidance from your Research Supervisor, who must agree to its technical content and findings. The thesis must be approved by a second reader, who may request revisions to the document. The Research Supervisor, in consultation with the second reader, assigns a grade to the thesis. M.A.Sc. degree candidates registered as full-time students are required to spend at least one winter session at the University. M.A.Sc. candidates may also register as part-time students. In either case, the program must be completed within 5 years of initial registration.... [-]

Mechatronics Design combines the fields of mechanical and electrical engineering in the study of integrated modelling, analysis, design and manufacture of electromechanical and mechatronic systems. These principles can be applied in the following industries: transportation; manufacturing and production engineering; biomedical and healthcare technologies; energy; aviation and aerospace; automated office and household technologies; and computer systems.

Students must have a Bachelor of Applied Science or equivalent, as well as some prior education in mechatronics design, to be eligible for the Mechatronics Design MEng program.

STRONG RESEARCH

The department has one of the most active research programs in Canada. It is home to 9 Research Chairs and is a member of 12 Research Institutes and Centres. Our major research groups are in Biomedical Engineering, Design and Applied Mechanics, Mechatronics and Manufacturing, and Thermofluids.... [-]

The thesis-based Master of Applied Science (M.A.Sc) in Mechanical Engineering is a traditional research-based degree. The program normally takes two years of full-time study and includes a total of thirty credits, research under the supervision of a faculty member and a thesis. The Master of Applied Science is the recommended course of study for students who may be interested in eventually pursuing a Ph.D.

Students taking their M.A.Sc in Mechanical Engineering can select one of four research areas: Design and Applied Mechanics, Mechatronics and Manufacturing, Thermofluids or Biomedical Engineering.*

*The Department of Mechanical Engineering also offers a full Biomedical Engineering (BMEG) program. Students in the BMEG program will achieve a degree in Biomedical Engineering.... [-]

ECE’s Master of Engineering (M.Eng.) program is designed for students who want to pursue their electrical and computer engineering education beyond the undergraduate level but are looking for an alternative to a thesis-based research program. The M.Eng. is now considered a minimum qualification for graduation in Europe, and the content provided here exceeds those expectations.

The Master of Engineering program requires students to complete 30 credits of coursework with the option of completing a supervised project. Students are free to choose among a number of graduate and senior undergraduate courses to complete the program.

Possible areas of concentration include:

Chemical and Chemical & Biological engineers create and develop processes to change raw materials into the products that society depends on; food, chemicals, fuels, energy, metals, pharmaceuticals, paper, plastics, and personal care products. Chemical and process engineers help to manage natural resources, protect the environment, control health and safety procedures and recycle materials while developing and managing the processes which make the products we use.

The Department of Chemical and Biological Engineering was established in 1999 at UBC and reflects the growing need for engineers in the fields of biotechnology, biomedical and bio-resource engineering. At present, there are 24 full-time faculty members in the Department of Chemical and Biological Engineering, together with a support staff of 17.... [-]

Join the academic community of one of the world’s leading mining schools. We are one of a few mining schools in Canada with facilities and expertise in Mining, Mineral Processing, Rock Mechanics, Social License, Mine Economics and Environmental Sustainability. Enroll in a Master of Engineering Degree at a top-ranked university and in one of the most beautiful and liveable cities in the world.*

Our cohort-based, professional Master of Engineering Degree is a course-based master which allows one to specialize in one of the following areas:

The program attracts mining professionals from all corners of the world and creates a diverse network of mining expertise. Students benefit from the academic content as well as the international professional experience each student brings to the program. Students also have the opportunity to enhance their experience with a 4-8 month paid work term.... [-]

The Master of Engineering in Naval Architecture & Marine Engineering (MEng NAME) is an interdisciplinary, industry-focused program that trains students in the design and construction of ships and other structures in the marine environment. The comprehensive and innovative curriculum draws material from Mechanical, Civil, and Materials Engineering, and offers instruction by both leading researchers and industry professionals. Students leave the program prepared for immediate and stimulating work in a vital and growing industry.

(Have 3+ years of industry experience and an interest in project management? Check out UBC’s Master of Engineering Leadership in Naval Architecture & Marine Engineering as well.) ... [-]

Materials research in the Department emphasizes the development of new processes and process models primarily for novel materials in the transportation sector and biomaterials for medical applications and aims at providing materials process solutions of societal magnitude including lightweight materials, cleaner and greener metallurgical processes, engineered materials to replace or repair injured body parts.

The Department fosters a strong interaction with industry through their Industrial Research Chairs. Industrially oriented research is combined with fundamental studies to advance understanding of the microstructure mechanisms and resulting properties.

The Master of Engineering Leadership (MEL) in Advanced Materials Manufacturing is an intensive one-year degree program for engineers who want to advance their careers in the automotive, aerospace and manufacturing sectors.

Experts in advanced materials manufacturing are instrumental to the research, development, testing and optimization of new multi-material manufacturing solutions to lighten cars and planes and reduce their environmental footprint. This is a rapidly evolving field and the growing need across multiple industries for those technical experts make participants of the program highly sought after.

The Master of Engineering Leadership (MEL) in Naval Architecture & Marine Engineering is designed for engineers who want to accelerate their career by leading and supervising teams and managing complex technical projects. This program combines the engineering and physics of ship design with broad business and leadership training.

UBC is the only centre for naval architecture and marine engineering study on the Pacific coast of North America, and Vancouver is a strategic coastal location with an industrially diverse environment. The program maintains vigorous links to the regional marine industry in both the government and private sectors, offering learning resources that add value to each student’s experience.... [-]

The Master of Engineering Leadership (MEL) in High Performance Buildings is an intensive one-year degree program for engineers and architects who want to make a difference in the building sector. Graduates of this program will have the technical and leadership skills to improve the energy performance of existing buildings and design integrated high-performance energy systems for new buildings.

Both government and private industry are fueling demand for high performance buildings experts with the creative and visionary skills to develop new processes and systems that drive positive and proactive change. Graduates can expect to pursue careers in advanced integrated green building design locally, nationally and internationally.... [-]

Program update: The MEL in Green Bio-Products will not be accepting applications for the 2020 intake. Check our other MEL program offerings for further opportunities.

The Master of Engineering Leadership (MEL) in Green Bio-Products is an intensive one-year degree program that will equip you with the technical and leadership skills required to contribute to the growing bio-economy. UBC is a world leader in creating innovative value from forest biomass, and graduates of this program will take their place as technical leaders and sector specialists in this growing industry.

This unique master’s degree program will: