Masters Programs in Engineering Studies

Compare 123 Masters Programs in Engineering Studies

In academic terms, a master is one who has completed a specific course of study at the post-graduate level. These degrees are granted by a number of different types of institutions and can take anywhere from two to four years to obtain.

What is a Master in Engineering Studies? These courses are most often taken as a bridge between an undergraduate degree and doctoral studies. The focus in these programs is usually on the academic side of engineering, with a typical selection of courses covering civil engineering, plastics, software engineering or environmental engineering. Classes may vary widely depending on the specific engineering focus of the programs, such as civil, computer, mechanical, or nuclear. However, courses tend to require a high level of mathematic and scientific performance from students and may include hands-on projects or theoretical dissertations as well.

One might expect to acquire a detailed knowledge of an engineering specialization over the course of one of these master's programs. This might assist in various professional tasks as an engineer. Graduates may also improve their organizational and research abilities, skills that are useful in both personal and professional situations.

It is crucial to obtain an accurate and updated tuition estimate before enrollment. Check with the admissions department or investigate the school's promotional materials for the most reliable figures.

Engineers are present in nearly every economic sector, such as retail, energy and transportation. They are also involved in high-level research programs, both applied and theoretical. An engineer with extensive experience and education might direct a research facility or teach at the university level. Graduates of an engineering studies master’s program may choose to continue their education in a doctoral program or work as an independent consultant for several engineering firms.

Engineering programs are often quite specific, so investigate each interesting program fully before applying. Search for your program below and contact directly the admission office of the school of your choice by filling in the lead form.

Read More

123 Results in Engineering Studies Filter

Engineering Studies

  1. Master
  2. Engineering Studies

Master Degrees

All (236) Master Degrees (123) Masters of Science (112) Masters of Arts (1)

Location

Study type

All Campus Online Distance learning

Pace

All Full time Part time

Engineering Engineer

Université Internationale de Casablanca
Campus Full time 3 years August 2017 Morocco Casablanca

The engineering cycle in Industrial Engineering takes place in 6 semesters, 1 of which is in core subjects and aims to train engineers capable of increasing the productivity, efficiency and profitability of industrial operations. [+]

Masters in Engineering Studies. The engineering cycle in Industrial Engineering takes place in 6 semesters, 1 of which is in core subjects and aims to train engineers capable of increasing the productivity, efficiency and profitability of industrial operations. The role of the Engineer in Industrial Engineering is to improve the technical efficiency of the production system, but also to know how to manage, to know manager. It will integrate in a global and systemic perspective all the functions of the company. ADMISSIONS Access in the 2 nd year is open, on a case study, to: Holders of a Master 1 in Mechanical Engineering, Electrical Engineering, Computer Engineering or equivalent diploma. SPECIALIZATION AND PFE The last year of study consists of two distinct parts: The semester (S9) is devoted to specialty courses. It is also an open to research for those students who wish to start doctoral studies. The options available to industrial engineering students are: LOG option: Logistics The proper functioning of any infrastructure project (ports, airports, road or motorway network, various production units, new towns, etc.), from its conception and realization until its commissioning, requires the intervention of Specialists in optimization of human and material resources. This is the role of an industrial engineering engineer specializing in logistics. The Logistics option makes these profiles very coveted by the industry. MIGP Option: Industrial Management and Production Management Training in Industrial Management and Production Management MIGP encompasses the design, improvement and installation of integrated systems of people, materials and energy. It... [-]

Master of Engineering in Engineering Management

Rochester Institute of Technology (RIT)
Campus Full time Part time 2 years September 2017 USA Rochester + 1 more

The objective of this degree program is to provide a solid foundation in the areas commonly needed by managers who oversee engineers and engineering projects. In addition to industrial engineering expertise, students will gain valuable knowledge in areas such as organizational behavior, finance, and accounting. [+]

Master of Engineering - Engineering Management The Master of Engineering in Engineering Management program uses a blend of ISE courses and courses from the College of Business to focus on the management of the engineering and technological enterprise. It combines technological expertise with managerial skills. Engineering Management is concerned with understanding the technology involved in an engineering project and the management process through which the technology is applied. This concentration deals with the dual role of the engineering manager; both as a technologist and a manager. The object is to provide a background in areas commonly needed in this role, such as organizational behavior, finance, and accounting, in addition to industrial engineering expertise. Each student should develop a program of study in conjunction with their advisor, that contains up to four courses from the College of Business to complement the engineering course work. [-]

Master of Engineering Management

A-STATE Queretaro
Campus Full time 1 year July 2018 Mexico Queretaro USA Jonesboro + 2 more

The Engineering Management program is an interdisciplinary program focusing on the knowledge and technical skills of advanced engineering and business management. The program is a one year master’s degree consisting of 30 semester credit hours and is designed for all engineers on management career paths as well as for those charged with managing technology in engineering, manufacturing, and other high-tech organizations. [+]

Masters in Engineering Studies. The Engineering Management program is an interdisciplinary program focusing on the knowledge and technical skills of advanced engineering and business management. The program is a one year master’s degree consisting of 30 semester credit hours and is designed for all engineers on management career paths as well as for those charged with managing technology in engineering, manufacturing, and other high-tech organizations. The master’s degree program may also benefit engineers pursuing professional licensures that are required to have an additional 30 semester credit hours of coursework beyond the bachelor’s degree or a master’s degree in engineering. Interdisciplinary Curriculum The curriculum consists of courses offered in the Engineering and MBA programs. The program is designed to accommodate working professionals seeking career advancement and/or career changes as well as recent graduates desiring to move into positions with management responsibility. Admission Requirements 18 undergraduate hours in engineering with a grade of C or better, a grade of C or better in upper-level mathematics courses, and an overall undergraduate GPA of 2.75 or greater. A minimum GRE of 143 on verbal reasoning Demonstration of proficiency in English: College degree from English-speaking university, TOEFL Score of 550 paper, 252 computer based, 79 IBT or IELTS of 6.0 band Two letters of recommendation Resume Non-Mexico Residents The admission requirements for Non-Mexico residents will be released soon. Course Requirements Call Number Course Hours EGRM 6003 Engineering Statistics 3 EGRM 6013 Quality Control and Improvement 3 EGRM 6023 Engineering Management I 3 EGRM 6033 Engineering... [-]

Master in Construction Engineering and Management

National Central University
Campus Full time September 2017 Taiwan Taoyuan

Graduate Institute of Construction Engineering and Management was founded in 2001. The Institute is the first of its kind in public universities in Taiwan. It was formerly the Construction Engineering and Management Division at the Department of Civil Engineering [+]

Graduate Institute of Construction Engineering and Management was founded in 2001. The Institute is the first of its kind in public universities in Taiwan. It was formerly the Construction Engineering and Management Division at the Department of Civil Engineering, which was established in 1991. Following the successfulness of the Division, the Institute continues to grow prosperously in all dimensions, reflecting the great need for the domain knowledge of construction engineering and management in Taiwan. Currently, there are 7 full-time faculty members, 24 graduate students at Master degree level and 19 at the doctoral level in the Institute. Required Courses Construction Planning and Schedule Management, BIM and Computer Application, Construction Cost Management, Construction Quality Management, Construction Management Seminar, Thesis writing and Issuing Elective Courses Tool Course Research Methodology for Construction Professional Management Construction Planning and Schedule Management Construction Productivity and Contract Management Construction Risk Management Construction Financial Management Construction Information and Knowledge Management Construction Law Construction Dispute Resolution Legal Topics in Engineering International Construction Contracting Sustainability Green Building and Sustainable Construction Evaluation Sustainable Development and Construction Requirements for Graduation Required credits : 27 credits (including 15 credits for required courses & 12 credits for elective courses) Duration of Study : 1~4 years Other requirements : Construction Management Seminar Topic Research Pass an oral defense of thesis. Admission Documents Study Plan Research Proposal Two Letters of Recommendation TOEFL or Other Evidence of English Proficiency Evidence of Chinese Proficiency Related Academic Publications [-]

MD Management Engineering (taught in English or Italian)

University Of Bergamo
Campus Full time 2 years October 2017 Italy Bergamo

The Master's Degree in Management Engineering is part of the "International Programs" of the University of Bergamo and it is a two year Course offered both in Italian and in English. The admission criteria are the same for the Italian-taught and the English-taught paths. The choice of the path takes place at pre-enrolment. [+]

Masters in Engineering Studies. The Master's Degree in Management Engineering is part of the "International Programs" of the University of Bergamo and it is a two year Course offered both in Italian and in English. The admission criteria are the same for the Italian-taught and the English-taught paths. The choice of the path takes place at pre-enrolment. TO WHOM IT IS ADDRESSED The Course is addressed to students seeking to complement an in-depth knowledge in engineering with the ability to take strategic decisions and tackle organizational issues. LEARNING OBJECTIVES The Course aims to develop the students’ entrepreneurial and managerial skills and to provide them with the ability to plan and manage complex systems. The Management Engineer is characterised by strong analytical and decision-making skills coupled by an open and multidisciplinary mindset. LEARNING SUBJECTS The Course covers a wide range of fields including technology, management, organization, entrepreneurship, economics and finance. LEARNING METHODS Traditional theoretical teaching is combined with executive seminars from prominent members of the business community and visits to leading companies of our region. Interactive teaching, project works and lab activities encourage students to work in teams and equip them with tools and methods to manage business challenges, identify solutions and effectively take decisions. Learning is envisaged in an international perspective. The environment is open to the contributions of international scholars and students. Stages, internships and learning periods abroad are encouraged and assisted. CAREER OPPORTUNITIES Graduates from the Master's Degree in Management Engineering find a natural field of employment in... [-]

Master in Bio Inspired Engineering

FH Kufstein Tirol - University of Applied Sciences
Campus Part time 4 semesters November 2017 Austria Kufstein

Learning from nature for engineering - that is the goal of this international Master's degree program (MSc) taught in English. Nature offers a myriad of solutions to engineering problems. [+]

Master in Bio Inspired Engineering Learning from nature for engineering - that is the goal of this international Master's degree program (MSc) taught in English. Nature offers a myriad of solutions to engineering problems. Over the course of four semesters, this program focuses on the implementation of numerous nature-inspired innovations into new technologies and sustainable products and offers an exciting overview of all core areas of biomimetics. Biomimetics is the process of utilizing natural constructions, processes, and developmental principles by transforming them into systemically engineered solutions that - without nature as a role model - we would not usually think of ourselves. While biomimetics as an interdisciplinary research field is still fairly new, it has four billion years of evolutionary mechanism optimization to show for. Considering the vast bio-cosmos' diversity and the complexity behind the necessary adaptations of systems to the environment, the tremendous potential that biomimetics has to offer to deal with the most pressing issues our society currently faces becomes evident. Through the symbiosis of a biological perspective on one hand and a natural science and engineering perspective on the other, this Master's degree program builds a cross-functional bridge founded on the graduate’s core competencies and hands-on experience. BENEFITS Holistic high-level training in all areas of biomimetics Directly usable and implementable solutions from biology and engineering Methodological competence for solving bionic issues Overview of sustainable manufacturing technologies for biomimetic products Use of biomimetics as a tried-and-tested supplier of ideas and an innovation engine Diving into a research area... [-]

Master in Engineering Design

KTH Royal Institute of Technology
Campus Full time September 2017 Sweden Stockholm

The Master’s programme in Engineering Design educates engineers by promoting excellent technical and organisational skills in product development, engineering and design of complex and innovative products. Students of the programme will choose one of three [+]

Master in Engineering DesignThe Master’s programme in Engineering Design educates engineers by promoting excellent technical and organisational skills in product development, engineering and design of complex and innovative products. Students of the programme will choose one of three specialisations: Machine Design, Mechatronics or Combustion Engines.Programme outlineThe programme is structured to enhance technical skills, as well as to give an introduction to various aspects of engineering design. The specialisations include a set of advanced courses which are compulsory and constitute two-thirds of the total course work.The first semester consists of basic courses in engineering design, modelling, programming (Mechatronics track), robustification (Machine Design track) and combustion technology (Combustion Engineering track). The second semester consists of advanced courses within your specialisation, and voluntary courses. During the third semester a large industrial project is the basis for an advanced course within your selected field. The programme concludes with a thesis project that can be performed in either an industrial setting or in an academic environment. Each student is encouraged to actively search for a suitable thesis project in industry, and KTH will provide information on helpful points of contact.Degree projectThe thesis project is supervised by an experienced researcher and can be performed in an industrial setting or in an academic environment. Exchange students are recommended to find a thesis project in their country of permanent residence or where they intend to begin a professional career.Career prospectsEngineering Design professionals educated at KTH work in a wide range of fields: as technology specialists at large industrial... [-]

Master of Engineering Science (MENS)

University of Southern Queensland (USQ)
Campus or Online Full time Part time 2 - 4 years February 2018 Australia Toowoomba Australia Online + 2 more

If you want to become a professional engineer, and have a three-year engineering degree but no work experience, the Master of Engineering will get you there. [+]

Obtain industry experience If you want to become a professional engineer, and have a three-year engineering degree but no work experience, the Master of Engineering will get you there. In this degree, you will: gain hands-on practical lab and industry experience to prepare you for working in the engineering profession apply your study knowledge to a real-world problem in your research project - a great stepping-stone to further research degrees, including your PhD. Majors Agricultural Engineering Applied Telecommunications Civil Engineering Electrical and Electronic Engineering Environmental Engineering Geographic Information Systems Mechanical Engineering Power Engineering Structural Engineering Surveying. Professional accreditation The majors of Agricultural Engineering, Civil Engineering, Electrical and Electronic Engineering, Environmental Engineering, Mechanical Engineering, Power Engineering and Structural Engineering have been accorded full accreditation at the level of Professional Engineer by Engineers Australia and graduates are eligible for Graduate membership at the Professional Level. The majors of Geographic Information Systems and Surveying have been accorded provisional accreditation at the level of Professional Engineer by Engineers Australia. Provisional accreditation will be reviewed by Engineers Australia for full accreditation following the emergence of the first representative group of graduates. USQ is seeking provisional accreditation by Engineers Australia for the new Applied Telecommunications major. Entry Requirements 3 or 4 year engineering degree in the relevant specialisation or equivalent or An appropriate 4 year engineering degree in a non-related specialisation or equivalent English Language Requirements You are required to satisfy the applicable English language requirements. This program requires a minimum of IELTS 6.5 or equivalent.... [-]

Master in Genetics and Bioengineering

International University Of Sarajevo IUS
Campus Full time 1 year October 2017 Bosnia and Herzegovina Sarajevo

Genetics and Bioengineering is one of the fastest growing disciplines and there is an increasing need for geneticists and bioengineers shaped with contemporary engineering standards. We aim to train open-minded geneticists and bioengineers, aware of local and global problems, and sensitive about ethical issues. [+]

Masters in Engineering Studies. Genetics and Bioengineering is one of the fastest growing disciplines and there is an increasing need for geneticists and bioengineers shaped with contemporary engineering standards. We aim to train open-minded geneticists and bioengineers, aware of local and global problems, and sensitive about ethical issues. The program focuses on practical applications of theoretical framework supplied at the undergraduate level, building up on the research arm and developing industry-specific practices. Cooperation with the industry is one of the main aims of the program in order to add to solution-finding skills and a mind-set of research-backed practicality. One-year degree 60 ECTS AQ Austria accredited 3500 Euro per year [-]

Master of Science Product Refinement

Hochschule Kaiserslautern - University Of Applied Sciences
Campus Full time 3 semesters March 2018 Germany Kaiserslautern

In the “Product Refinement“ program, which is unique worldwide, you will systematically gain technical expertise and develop your personal competences. You will become fully qualified and well prepared to adjust to the various requirements you will encounter in your future career. [+]

Master of Science Product Refinement In the “Product Refinement“ program, which is unique worldwide, you will systematically gain technical expertise and develop your personal competences. You will become fully qualified and well prepared to adjust to the various requirements you will encounter in your future career. Lectures, seminars, internships and excursions will provide you with a solid knowledge of technical processes, advanced sciences and also economic aspects. Some tasks can be solved by means of teamwork, cooperating together with your fellow students. This Master program covers three semesters and can be commenced twice a year - in the winter semester and in the summer semester. In total, 90 credit points are to be collected. In addition to the 210 credit points attained from a seven-semester Bachelor degree program, 300 points can be achieved in total, which, in turn, qualifies a Master study course graduate for Ph.D. programs. It is possible for Bachelor graduates, who have only attained 180 points from a six-semester study course, to obtain a further 30 points by means of additional modules. You can align your studies to your own needs and preferences by choosing two elective modules. After completing the Master´s thesis in the third semester, you will receive the degree “Master of Science“ enabling you to proceed to a Ph.D. program. Admission requirements Three year Bachelor´s degree or Diploma in Engineering or Natural Sciences or equivalent qualification (210 European Credit Transfer System -ECTS-, in case of 180 ECTS a gateway is possible). The final grade... [-]

Master Management & Engineering

Leuphana University of Luneburg
Campus Full time Part time 4 - 8 semesters October 2017 Germany Lüneburg + 1 more

The Master’s Program in Management & Engineering centers on the handling of interactions between management and technology, as well as on imparting a fundamental and [+]

Masters in Engineering Studies. The Master’s Program in Management & Engineering centers on the handling of interactions between management and technology, as well as on imparting a fundamental and comprehensive understanding of management of modern design. CONTENT AND RATIONALE Strategic design options and operational optimization tasks almost always include interconnections overarching technology, business and management. The in-depth understanding of engineering is seen in varying degrees as a key success factor for the management of industrial enterprises. The program therefore combines the learning of management skills with training in the application of academic methods in the field of engineering sciences. STRUCTURE The first semester includes three modules on the fundamental principles, methods and processes of engineering and simulation. In addition, students will select one from two focuses on Automation Technology (AT) or Production Technology (PT) and complete the Module on Photonic Systems or Production Management. In the second semester, students complete, depending on the focus, Modules on actuators and control technology as well as sensors and intelligent systems (AT) or production engineering and production logistics (PT). In a challenging educational research project, students deal in a team with practical issues, which can be clarified by interdisciplinary or subject-based reflection. In addition, a selection module for individual subject focus is available. In the third semester, students take modules corresponding to the focal points of their studies. Modules on Components of Control Systems (AT) or Strategic Production Networks (PT) as well as three elective modules are available for selection. The third semester, therefore,... [-]

Master in Business Engineering - taught in FRENCH

University of Mons
Campus Full time 2 years September 2017 Belgium Mons

The master’s degree in business engineering, representing 120 credits, provides solid specialist training in management, enabling effective integration into private or public industrial or non-industrial organisations. [+]

This program is taught in FRENCH. The master’s degree in business engineering, representing 120 credits, provides solid specialist training in management, enabling effective integration into private or public industrial or non-industrial organisations. Profile of the programme The master’s degree in business engineering offers graduates management training that is based on traditional courses (finance, marketing, accounting, law, industrial economics, etc.) but also on specific disciplines that are in high demand in the market, such as the environment, logistics, auditing, entrepreneurship, production management, etc. The curriculum includes: A first year of 60 credits distributed across a common core (human resource management, statistical and econometric methods in management, logistics, financial management, advanced marketing, advanced microeconomics, tax and business law, production management and one of four major options: finance, marketing, auditing and international management). A second year of 60 credits built around a common core of 40 credits (dissertation, internship, strategic management) and a deepening of the major option chosen in the first year of the master’s. Languages are naturally part of the curriculum, and follow the student through to graduation. They are taught in specific language lessons and are used for communication in seminars in English, Dutch or Spanish. The curricula offered by the Warocqué School of Business and Economics have been ISO-certified since 2003. This certification, which is identical to that used in the professional world, involves the various stakeholders in a process leading to continuous improvement in the quality of the education that is provided. This quality approach, with the student... [-]

Master of Advanced Engineering (Energy and Sustainability)

Monash University Malaysia
Campus Full time Part time 18 - 36 months July 2018 Malaysia Selangor + 1 more

The Master of Advanced Engineering (Energy and Sustainability) is designed for working engineers and engineering graduates with an ambition to lead. [+]

Masters in Engineering Studies. The Master of Advanced Engineering (Energy and Sustainability) is designed for working engineers and engineering graduates with an ambition to lead. Addressing the pertinent demands in sustainable energy development, the course guides you to greater applicable knowledge in this area of specialisation and to succeed in complex problem solving methods. This program is ideal for those of you who aspire for career advancement in the competitive global environment. Core units Advanced Engineering Data Analysis Engineering Entrepreneurship Major units Energy Efficiency and Sustainability Engineering Sustainable Energy Technologies Energy Efficient Lighting Principles and Practices for Sustainable Development Elective units Environmental and Air Pollution Control Smart Grids Minor project AREA OF STUDY You will acquire an advanced understanding in energy and sustainability and the ability to develop solutions to complex engineering problems. You will study core units in engineering leadership and engineering analysis to strengthen your abilities in critical reasoning, innovation and strategic thinking. Apply advanced energy and sustainability based knowledge in an engineering context Employ energy and sustainability based techniques to solve complex problems, design engineering solutions, and evaluate potential designs to identify optimal solutions Research, investigate and critically appraise current developments and research directions, and identify future directions for energy and sustainability Demonstrate a commitment to uphold code of ethics and established norms of professional engineering conduct Communicate information effectively to industry and wider community Demonstrate knowledge of team dynamics and leadership, and function effectively as an individual and in diverse engineering teams Select and apply appropriate... [-]

Master of Engineering (Electrical)

Universiti Tunku Abdul Rahman (UTAR)
Campus Full time 1 - 4 years May 2018 Malaysia Perak

UTAR’s Master of Engineering (Electrical) programme aims to train engineering graduates to design better sustainable systems for electricity generation, transmission, and distribution for better operational safety, efficiency and the need to use renewable energy to address the escalating demand for energy. [+]

UTAR’s Master of Engineering (Electrical) programme aims to train engineering graduates to design better sustainable systems for electricity generation, transmission, and distribution for better operational safety, efficiency and the need to use renewable energy to address the escalating demand for energy. It also serves as a postgraduates course for Electronic Engineering graduates to develop the necessary competencies to practice as Electrical Engineers with the knowledge and ability to carry out research and solve problem effectively. Upon graduation, graduates should be able to: Establish mastery of literary competencies in relation to Electrical Engineering profession. Undertake independent research and implementation of Electrical Engineering projects. Demonstrate commitment to professional ethics in engineering work to achieve high level of governance with full regard to public interests. Lead, communicate and coordinate effectively in multi-disciplinary settings. Foster high standard of professionalism through continuous learning, applying, evaluating and refining processes in engineering practices. Salient features Emphasis on producing highly skilled engineers and technical professionals Curriculum relevant to industry demand Balanced approach between theoretical learning and practical training Research-based projects Experienced and qualified facilitators Qualifications Bachelor’s Degree with Honours and CGPA of 2.75 and above or a Bachelor’s Degree with CGPA of 2.75 and above in a related field from UTAR; or Bachelor’s Degree with Honours and CGPA of 2.50 and above but less than 2.75 or a Bachelor’s Degree with CGPA of 2.50 and above but less than 2.75 in a related field from UTAR and subjected to rigorous internal assessment; or Bachelor’s Degree with Honours and... [-]

Master of Engineering in Engineering and International Business

SRH Hochschule Berlin
Campus Full time 4 semesters October 2017 Germany Berlin

Enhance your career prospects with our interdisciplinary Master's programme in Engineering and International Business. Our new degree enables you to gain a holistic understanding of both economic and technical systems. [+]

Masters in Engineering Studies. Become part of the Blue Economy You have an Engineering or Science degree? You wish to get a business education while extending your technical knowledge and skills in the area of renewable energies? Enhance your career prospects with our interdisciplinary Master's programme in Engineering and International Business. Our new degree enables you to gain a holistic understanding of both economic and technical systems. Considering our international perspective, we put an emphasis on three relevant professional areas within the curriculum: renewable energies, sustainable water supply and sustainable waste management. Take advantage of our excellent study conditions, our expertise, our networks and the international atmosphere of SRH Hochschule Berlin. Become a sought-after international expert of the Blue Economy. Learn to work, think and act like both an engineer and an entrepreneur. Content, Objective and Course Structure The interdisciplinary approach of the study programme fosters the technical knowledge in elective modules on renewable energies, water management and residue management. Using the synergies between these modules, students acquire the ability to combine different technologies and skills in order to develop new sustainable solutions. In addition to technical expertise, Master of Engineering students become acquainted with management subjects and theories and get to extend their project management skills within an international context. They learn about Marketing, Sales, Finance, Investment Strategies and International Contract Law. Equipped with this interdisciplinary background, graduates of the Engineering and International Business programme are able to enjoy great career prospects. Knowledge, methods, experience and personality Professional, social,... [-]