Part time Master's Degree in Product Design in Asia

See Part time Masters Programs in Product Design in Asia 2017

Product Design

The benefits of a Masters extend beyond improving your earning potential. They can provide you with personal and professional skills to accelerate your development. They are also an opportunity to differentiate yourself from your peers, many of whom will have similar A-level and undergraduate qualifications.

Product design programs may train students to craft useful and relevant products based on consumer desires and demands. Students may gain the knowledge necessary to create innovative, attractive and artisanal products that fit market demands.

As the largest and most populous continent in the world, Asia consists of a wide variety of ethnic groups, cultures, environments, economics, historical ties, and governmental systems.

Contact Schools Directly Best Part time Master's Programs in Product Design in Asia 2017

Read More

M.Des. in Human Centered Design

Srishti Institute of Art, Design and Technology
Campus 2 years July 2017 India Bangalore

The vision of this program is to create designers who will empathetically explore and apply understanding of human behavior, context, and technology towards creation of digital products and services that enhance the users lives. They will not only, what David Kelly, IDEO says, “Have a dream that goes beyond what exists, rather than fixing what exists”, but also realize this dream. [+]

Top Part time Masters in Product Design in Asia. M.Des. in Human Centered Design The vision of this program is to create designers who will empathetically explore and apply understanding of human behavior, context, and technology towards creation of digital products and services that enhance the users lives. They will not only, what David Kelly, IDEO says, “Have a dream that goes beyond what exists, rather than fixing what exists”, but also realize this dream. Human Centered Design is about keeping focus on “people” while creating products and services. It is about creating rich user experiences that aim at solving existing problems, creating delight for people and making products and services usable and useful. At Srishti Human Centered Design concentrates on Interaction Design and User Experience Design. We think about human-centered design as not just “user-driven” in its traditional sense, but more about “designing for emerging usages”. We foster a combination of creative Art & Design thinking, along with critical thinking of the Humanities to explore a human-centered design that not only produces great digital solutions, but also critically questions and explores future ways of interacting with digital technology and their implications. Human-Centered Design at Srishti not only covers the traditional reductive aspects of User-Centered Design & Human-Computer Interaction such as Historical Frameworks & models (e.g. cognitive psychology models, cooperative design, participatory design, contextual design) Design Elements (visibility, accessibility, legibility & language) Creative Design (Ideation & brainstorming, concept development) Analysis tools (persona, scenarios and use-cases, usability and experience evaluation) Evaluative tools (requirements, usability)but also covers aspects such as Theory of Persuasive & Emotional Design, including how to design for human emotions, aesthetics & pleasure Designing meaningful interactive products and services across different cultures through applying Cross-cultural and trans-cultural design frameworks Emerging trends around transitions in human behaviors, cultures and societies and their implications on Design Emerging trends in technology and interaction modalities Methods and frameworks for creative thinking and innovation, such as participatory enactment, alpha ideation, vision-driven design, etc Frameworks & models (e.g. cooperative design, participatory design, contextual design) Design Elements (visibility, accessibility, legibility & language) Rhetorical situation (audience, purpose & context) Analysis tools (persona, scenarios and use-cases) Evaluative tools (requirements, usability) Apart from these, the course also covers aspects such as Emotions, aesthetics & pleasure Cross-cultural and trans-cultural influences Trends around transitions in behaviors, cultures and societies Trends in technology and interaction modalities Creative thinking and innovation The Postgraduate studies in Human-Centered Design is rooted in the historical evolution of the field of Human-Computer Interaction, from the early versions of a cognitive human to the current understanding of designing for the emotional and socially situated humans, with their own needs, desires and aspirations. However, we also make the students capable of exploring the emerging understandings of humans in transition, and explore and construct a future that seems to go beyond human-centered design. Graduates of the Human Centered Design at Srishti will be able to contribute in the areas of strategic user experience design, interaction and user-interface design. They will be involved in designing and enhancing digital products and services and their interfaces such as Zomato, Cleartrip, etc. They could also shape the emerging markets through designing new digital products & services in the areas of healthcare, and smart and sustainable living. Disciplines The course is informed by the following learning disciplines: Industrial Design – namely Product Design, Furniture Design & Services and Systems Visual Communication Design Anthropology, Sociology, Cognitive Psychology & Cultural Studies Sustainability Information Technology Research and Collaboration The students under this course will have the opportunity to work with the following centers and labs at Srishti. Grass Roots Innovation Design Studio (GRIDS) Srishti Labs (Slabs) IMPACT EDGE Design+Environment+Law Laboratory (DEL Laboratory) Center for Education, Research, Training, and Development (CERTAD) Pandimonium Lab Frugal Design Course Structure Studios encourage active, contextual learning where students develop core disciplinary skills and knowledge. Studios facilitate collaborative and creative design solutions to complex, open-ended problems Workshops provide intense learning experiences in making and doing, across the different disciplines. Internship with an industry or a design studio is compulsory for students at the end of 1st year for M.Des. Self Initiated Project is an end of the semester challenge that allows the student to engage in research / enquiry or design based projects. Students begin by writing their project proposal and defining the scope of their project and they are mentored by faculty / design professionals. Electives are liberal arts courses aimed to cultivate intellectual and reflective abilities in students and motivate them to probe deeper and approach their design process in a holistic manner. Capstone Project is the culmination of the research, capabilities and knowledge gained over the last three semesters. Students are required to submit their design output and a mandated thesis document. Students are mentored during this final project and go through seminars to get feedback from faculty and peer groups Learning Approach Learning is driven by an inter-disciplinary engagement with theories, methodologies and advanced skills of Design Thinking. Learning will primarily happen from “doing” and “experiencing”. When students are able to apply theories and frameworks to what they design they not only value the research and constructs created by others, but also question and reformulate existing norms. Learning will be through solving real life problems through the application of theories, frameworks and methods of Human-Centered Design. Skills and tools will be picked up along the way, however “application” of design principles in the context of real-world design problems will be the primary mode of learning. Discussion-based learning, learning by teaching, and project-based learning are some of pedagogical tools employed to create insights into real-life situations and industry needs. The learning approach will encompass hands-on design thinking, design research, deep understanding of human-centered design approach, and creative thinking, in combination with critical humanist thinking. The program prepares the students to participate and function in the areas of innovative digital product & service design by training and exposing them to various skills such as but not limited to Design Thinking & Processes, Collaborative projects, Leadership Skills, Social Concerns, and Technical & Written Communication. Capability Sets Upon successful completion of the course, graduates will have the capabilities to: Understand the essence of centering the human in a design process and apply the principles of human centered design to formulate value-driven digital solutions Understand and develop an individual stance on historical, current and emerging trends about the relationship between human experience and digital technology Observe and systematically evaluate everyday human activities and develop empathetic & nuanced understanding of human experience Engage with multiple forms of data sourced from multiple stake-holders through participatory methods and synthesize into novel insights that will inform design Develop divergent and convergent design thinking abilities to convert the empathetic insights from research into purposeful & value-laden ideas of digital interactions & experiences Apply principles of user experience & interaction design to craft usable, desirable & appropriate digital artifacts Work with multiple media and materials rapidly to make technological artifacts available for iterative evaluation. Speculate, craft and utilize interactive mockups as tools of inquiry into contemporary & future digital experiences. Take a critical & cross-cultural stance towards complex issues and the role & implications of a human-centered designer in shaping and solving the issues. Communicate compellingly the design process to invite critique & develop a community of stakeholders for the work. Opportunities Students of the Human Centered Design at Srishti will be able to contribute in the areas of strategic user experience design, interaction and user-interface design at numerous MNCs, startups, R&D centers across India and abroad, involved in developing technology based products, interfaces and services. Training in HCD also opens doors in the areas of strategic design thinking and innovation. Enquiries This course is led by Dr. Naveen Bagalkot For further information, kindly email Girish Prabhu at girish@srishti.ac.in [-]

Master of Furniture Design

CEPT University
Campus 2 years July 2017 India Ahmedabad

Furniture is an integral part of human habitat. Depending on the type of living environment, furniture could be the result of a bespoke design or it may be an object that is mass produced. The M. Design – Furniture Design program is a pragmatic response to the growing needs of the furniture industry and of the retail market to-day. The exponential rate of growth across all metro cities is leading to a huge demand for high quality affordable furniture in all sectors. Currently, a large percentage of furniture supplied to the market comes from abroad and could as easily be designed and made in India. [+]

Master of Furniture Design Faculty of Design –CEPT University Furniture is an integral part of human habitat. Depending on the type of living environment, furniture could be the result of a bespoke design or it may be an object that is mass produced. The M. Design – Furniture Design program is a pragmatic response to the growing needs of the furniture industry and of the retail market to-day. The exponential rate of growth across all metro cities is leading to a huge demand for high quality affordable furniture in all sectors. Currently, a large percentage of furniture supplied to the market comes from abroad and could as easily be designed and made in India. In the spirit of the new ‘Make in India’ initiative promoted by the national government, this program will prepare students to be a part of the emerging reality of India as a global, high-tech, high-skill industrial hub. The program aligns with the ‘Make in India’ initiative in its vision to: Foster Innovation Enhance skill development Protect intellectual property Build best-in-class manufacturing infrastructure Addressing this reality, the program will equip students with the tools to be able to add value to all aspects of the furniture industry. "Adding value" is the key objective for the designer whereby the detailed understanding of materials and manufacturing processes enable better products to be made. In addition, the needs of the consumer, either private individuals, corporate or institutional customers, will be understood so that the most appropriate design solutions may be arrived at. The recently introduced 2-year full-time post graduate program leading to Master of Design – Furniture Design, is a skill-based professional program which will prepare students as designers and innovators for the rapidly developing Indian furniture industry. The program will address contemporary issues in design such as mass production, customization, future technologies, environmental concerns and sustainability. Students will be taught by highly-trained academic staff who are also practising professionals in the field. They will have access to a first class workshop facility which will be integrated into the learning process; where ideas can be tested and full scale models made. All the resources of CEPT University campus will be available to the students of the program and they will be encouraged to engage with different design disciplines. Curriculum The program spans four semesters that are each structured around a specific design theme, starting from small scale simple domestic elements and leading to an understanding of complex specialized needs of institutions. Students will spend their fourth semester as interns working on a live-project with a company to acquire first-hand industry experience before they graduate. Students may have the opportunity to be engaged by design studios overseas to undertake their internships. Overall, the program equips students with in-depth understanding of furniture design and production and encourages them to investigate the current trends in materials, technology and consumer behavior in order to develop innovative, efficient and culturally relevant furniture for the Indian market. The M. Des Furniture Design Program focuses on the following methods of teaching: Hands-on learning Group dynamics - participation, discussion, brain storming Thesis and antithesis – independent thinking, research, exploration Learning from industry specialists in various fields related to furniture design. High faculty to student ratio leading to increased interaction and attention for each student and their specific needs as design students. Access to visiting faculty from industry and practising professionals Multidisciplinary interaction of students across CEPT University through projects, electives and summer/winter schools Studio visits / visits to industry, manufacturing units. Admissions and Prerequisites All applications to the program are evaluated based on a portfolio, a statement of purpose and an interview (in person or via tele conference). The three stage selection process culminates with the final merit list of all eligible applicants. Minimum qualification for applying to the program comprise: Bachelor’s degree in Architecture recognized by the Council of Architecture, OR Bachelor’s degree in Industrial Design (four years or more), OR Diploma and/or Degree in Interior Design or Interior Architecture or Design of minimum four years duration (12 + 4), provided that the program is considered equivalent to a degree program by the Equivalence Committee of CEPT University Bachelor's Degree in Mechanical Engineering or Civil Engineering (minimum 4 years program). International Entry Requirements CEPT’s guiding principal for International Admissions is to seek equivalence between International standards achieved and those of Indian home students. There are differences between Europe, America and India in degree length, academic standards and award structure. CEPT will therefore consider each International application on its merits seeking international equivalence and bearing in mind any professional requirements that these Programs have. [-]

MDes Industrial Design

Xi'an Jiaotong-Liverpool University
Campus Part time 18 - 30 months September 2017 China Suzhou

The MDes in Industrial Design is for graduates or professionals with design or engineering backgrounds, who want to broaden and deepen their design and design research thinking. [+]

Top Part time Masters in Product Design in Asia. Overview Growth in China will redefine patterns of consumption, production, and cultural appropriation domestically and globally for generations to come. As China-based companies shift to a designed-in-China strategy and international companies seek to design for the Chinese market, career opportunities for graduates of this programme will be numerous. The MDes Industrial Design programme is for graduates or professionals with design or engineering backgrounds, who want to broaden and deepen their design and design research thinking. You will develop an appreciation for and practice cross-cultural approaches towards design and product, service and systems development. Options are available for part-time study for working professionals. Following this programme, you will develop individual specialism skills while maintaining a generalist, transdisciplinary outlook towards design. During the first semester of this programme, you will advance your competencies in design research methods, transdisciplinary design tools, innovation processes, and design visualisation and communication. In the following two semesters, you will be supervised by academic staff to develop and carry out your own design research project. Graduates of this programme, as with all XJTLU masters degrees, earn a University of Liverpool degree that is recognised by the Chinese Ministry of Education. Knowledge and skills You will be encouraged to take advantage of the transdisciplinary nature of this programme, with an emphasis on development and evaluation of new investigative methods and approaches. Your projects can have an academic emphasis to prepare for doctoral study or be based on a more applied, industry-focused agenda. Modules • Framing design research • Methods for transdisciplinary design • Innovation by design • Advanced design visualisation and communication • Design research project (over two semesters). Additional learning activity modules Careers The MDes Industrial Design programme offers you a solid preparation for careers such as design practitioners and design managers, as well as for further studies on design-related PhD programmes. Fees RMB 90,000 for the entire 18 month full-time programme. University tuition fees cover the cost of your study with us. Entry requirements: academic background An undergraduate degree (UK 2:1 or equivalent) in a relevant field such as urban planning and design, architecture, geography, economics, management, environmental science, social or public policy. English language requirements • IELTS: 6.5 (minimum of 5.5 in all sections) • TOEFL iBT: 90 (minimum of 21 in any skill) [-]

MPhil in Engineering, Product Design and Textiles specialisms

University of Bolton
Campus 2 - 4 years August 2017 United Kingdom Bolton

The master of philosophy (MPhil) degree is aimed at students with a good honours degree (or significant work experience and professional qualifications) who wish to undertake a research-based masters degree. As an MPhil student you will critically investigate and evaluate an approved topic and demonstrate an understanding of research methods in your chosen engineering or design subject area. You will present and successfully defend a... [+]

Engineering, Product Design and Textiles specialisms - MPhil The master of philosophy (MPhil) degree is aimed at students with a good honours degree (or significant work experience and professional qualifications) who wish to undertake a research-based masters degree. As an MPhil student you will critically investigate and evaluate an approved topic and demonstrate an understanding of research methods in your chosen engineering or design subject area. You will present and successfully defend a thesis by oral examination to be awarded the degree. If you wish to develop research and analytical skills, this course is appropriate. If you are a professional who would like to gain postgraduate qualifications, but do not want to undertake a taught masters programme, then this is an alternative. Careers & professional development If you register for the MPhil you may be approved for transfer to a PhD after an initial period of registration and demonstration through a progress report of the development of your research into a PhD. Recent graduates have gone on to careers in academia and management roles in industry. Subject overview The engineering and design research group works in collaboration with industry. Our strengths lie in applied research. The group encompasses a number of different engineering and design disciplines, including electronic engineering, mechanical engineering, automotive engineering, product design and textiles. Research topics Research topics include: - applications of electronics - applied physics - robotics - manufacture of electronics-enabled products - engine design - structural crashworthiness - impact biomechanics - accident investigation - manufacturing systems - general textile technology - textile supply chain - advanced composite materials - inclusive design - finite element modelling. [-]

Master of Design (MDes) Design Practices

HK PolyU School of Design
Campus 1 year September 2017 Hong Kong Kowloon

The Master of Design (Design Practices) is a hands-on, studio-based specialism directed at students who want to deepen their innovative abilities, who are curious about design and business integration,and who enjoy the creative form challenges of making objects and ideas that improve people’s lives. [+]

Top Part time Masters in Product Design in Asia. The Master of Design (Design Practices) is a hands-on, studio-based specialism directed at students who want to deepen their innovative abilities, who are curious about design and business integration,and who enjoy the creative form challenges of making objects and ideas that improve people’s lives. Designers with a Bachelor’s degree in product design, fashion design, interaction design, architecture, product engineering, interior design or communication design may find Design Practices to be a logical next step in their professional development. Aims This specialism focuses on design as a strategic tool for the consumer economy. Interdisciplinary projects embrace business strategy and brand development, identifying opportunities for innovation and user experience. This full-time international program responds to the world’s industrial and technological transformation with a focus on China. The development of a high level of research, analysis, strategic vision, aesthetics, and technical mastery in development, fabrication and commercialization of design prepares students for leadership roles. Objectives This specialism seeks to join practical strategies for innovation with formal aspects of design development, by making design through: real-world project development teamwork approaches to problem solving cultural considerations as well as business & technology customers’ needs and goals design entrepreneurship and brand creation Entrance Requirement A Bachelor’s degree in design or the equivalent in a related discipline and professional experience in design is preferred. Scholarships Scholarships for Graduates of QS Top Design Schools (2017) To off-set 10% or 15% (holder of a First Class bachelor’s degree) of tuition, regardless of which MDes programmes students are admitted to – applicable to graduates of QS world’s top universities for art & design - 2016. Scholarships (offered by MDes full-time specialisms) On a competitive basis, to off-set 25%–50% of tuition – applicable to all non-local students and PolyU Design alumni who accepted an admission offer. Admission Dates for September 2017 Entry Application Period Starts: 22 Nov 2016 First Round Review: 20 Jan 2017 Application Deadline: 28 Apr 2017 Interview: Mid Feb to May 2017 Announcement of result: 2 weeks after interview [-]

Master of Design Studies

Izmir University of Economics
Campus 2 years September 2017 Turkey Balçova

The Master`s Program in Design Studies offers a common ground for various design disciplines and embraces interdisciplinary as an academic framework. Such interaction between disciplines will allow students to discover more creative solutions. [+]

The Master`s Program in Design Studies offers a common ground for various design disciplines and embraces interdisciplinary as an academic framework. Such interaction between disciplines will allow students to discover more creative solutions. Introduced as the first graduate program of this kind in Turkey, architects, interior architects, graphic designers, industrial designers, fashion designers and applicants of other disciplines are provided with a unique research opportunity. With studies informed by this broad approach, ultimately, students will prepare a comprehensive thesis in their chosen field. Students aiming to apply their skills in their respective industries are provided with opportunities to deal with projects in a theoretical framework. Consequently, it is possible for graduates to pursue careers in both the field market and academia. The Master`s Program in Design Studies is structured with the belief that the theoretical and practical aspects of successful graduate education can be effectively joined in a way that will be constructive for graduates of various disciplines. Emphasizing relations between various subjects and approaches provides the students with a broader professional training. Each will leave the program equipped with substantial and creative skills, unique experiences, and specialized knowledge. The program was launched in the 2006-2007 academic year. Currently, students with bachelors degrees in architecture, interior architecture, industrial design, graphic design, fashion, management, textile and mechanical engineering are doing research in areas that range from prototypical car design to urban identity, from smart textiles to cultural representation, from the use of daylight in architecture to fashion and gender. The students have the ability to spend a part of their educational life abroad within the scope of ERASMUS. We have exchange agreements at the graduate level with the following universities in different fields of design: UNIVERSITE DE LIEGE - BELGIUM ECOLE NATIONALE SUPÉRIEURE DES ARTS DÉCORATIFS (ENSAD) - FRANCE ALBSTADT-SIGMARINGEN UNIVERSITY - GERMANY REUTLINGEN UNIVERSITY - GERMANY UNIVERSITY OF THE AGEAN - GREECE UNIVERSITÀ DI BOLOGNA - ITALY POLITECNICO DI MILANO - ITALY WEST POMERANIAN UNIVERSITY OF TECHNOLOGY, SZCZECIN - POLAND ACADEMY OF FINE ARTS IN WARSAW - POLAND INSTITUTO DE ARTES VISUAIS, DESIGN E MARKETING (IADE) - PORTUGAL UNIVERSITY OF AVEIRO - PORTUGAL ESAD- ESCOLA SUPERIOR DE ARTES E DESIGN - PORTUGAL UNIVERSIDADE LUSOFONA DE HUMANIDADES E TECHNOLOGIAS - PORTUGAL FACULTY OF DESIGN - SLOVENIA UNIVERSITY OF NOVA GORICA - SLOVENIA SHEFFIELD HALLAM UNIVERSITY - UNITED KINGDOM OCCUPATIONAL PROFILES OF GRADUATES Introduced as the first graduate program of this kind in Turkey, architects, interior architects, graphic designers, industrial designers, fashion designers and applicants of other disciplines are provided with a unique research opportunity. With studies informed by this broad approach, ultimately, students will prepare a comprehensive thesis in their chosen field. Students aiming to apply their skills in their respective industries are provided with opportunities to deal with projects in a theoretical framework. Consequently, it is possible for graduates to pursue careers in both the field market and academia. Courses FFD 505 Design Seminar FFD 511 Research Methodology FFD 595 Seminar FFD 506 Graduate Design Studio FFD 599 Master Thesis Elective Courses FFD 501 Design Research Methodology FFD 502 Current Topics in Art and Design FFD 503 Design Representation Theories FFD 507 Design Project Research FFD 509 Ethics and Social Responsibility in Design FFD 510 Individual Study FFD 551 Spatial Practices FFD 555 Imaginary and Futuristic Design Studies FFD 557 Ecological and Bio-climatical Design FFD 563 Art, Design and City FFD 566 Trend Catalogue Project FFD 568 Looking into The Past in Contemporary Fashion FFD 569 Advanced Materials in Design FFD 571 Literary Spaces FFD 572 Creativity and Design Management Application Requirements for International Students Who can apply? Foreign nationals Blue Card holders (Turkish citizens by birth, but released from citizenship by the Ministry of the Internal Affairs, and who can certify that their minor children who are registered in that permit are eligible for the rights stated in Law No. 5203) Foreign nationals who became Turkish citizen afterwards/dual citizens in the same status Turkish nationals who completed the last three years of their secondary education (high school) in a foreign country excluding Turkish Republic of Northern Cyprus, (including those who completed their entire secondary education (high school) at Turkish schools in the presence of Ministry of National Education in a foreign country excluding Turkish Republic of Northern Cyprus) before 01 February 2013. Turkish nationals who completed their entire secondary education (high school) in a foreign country excluding Turkish Republic of Northern Cyprus, (including those who completed their entire secondary education (high school) at Turkish schools in the presence of Ministry of National Education in a foreign country excluding Turkish Republic of Northern Cyprus) after 01 February 2013. Turkish Republic of Northern Cyprus nationals who reside there and completed their secondary education there having a GCE AL certificate, and those, who registered to high schools in other countries between 2005-2010 and hold or will hold GCE AL certificate. Who cannot apply? Turkish nationals, who completed their entire secondary education in Turkey or in Turkish Republic of Northern Cyprus. Turkish Republic of Northern Cyprus nationals (excluding the ones who completed their entire secondary education there having a GCEAL certificate, and those, who registered to high schools in other countries between 2005-2010 and hold or will hold GCE AL certificate) Dual citizens who has a Turkish citizenship by birth. (excluding the ones who completed their entire secondary education in a foreign country excluding Turkish Republic of Northern Cyprus/ those who completed their entire secondary education at Turkish schools in a foreign country excluding Turkish Republic of Northern Cyprus) Dual citizens who has a Turkish Republic of Northern Cyprus citizenship (excluding the ones who completed their entire secondary education there having a GCEAL certificate, and those, who registered to high schools in other countries between 2005-2010 and hold or will hold GCE AL certificate) Turkish nationals or dual citizens, who have a Turkish citizenship by birth, that attend schools affiliated to the embassies in Turkey, and foreign high schools located in Turkey. [-]

Master of Design Management

Izmir University of Economics
Campus 2 years September 2017 Turkey Balçova

The Master’s Program in Design Management is a joint program between Faculty of Business and Faculty of Fine Arts and Design. Design Management Master Program is intended to be in an efficient collaboration with the programs of “Master of Business Administration (MBA)” within Graduate School of Business; and “Master and PhD of Design Studies” and “Master of Yacht Design” within Graduate School of Social Sciences. [+]

Top Part time Masters in Product Design in Asia. The Master’s Program in Design Management is a joint program between Faculty of Business and Faculty of Fine Arts and Design. Design Management Master Program is intended to be in an efficient collaboration with the programs of “Master of Business Administration (MBA)” within Graduate School of Business; and “Master and PhD of Design Studies” and “Master of Yacht Design” within Graduate School of Social Sciences. Gaining and developing the skill in interdisciplinary studies, which form the basis of Design Management, is aimed with this program. With this program, the students get to reconsider design/business decisions and strategies; and to transform them into products, services, communications, environments and brands in order to generate innovative and creative solutions. The program helps the students to establish a strong relationship among ideas, strategies, products and systems emerged through the processes of design management; and the users in the market. This goal should be achieved with the coexistence of students with diverse academic backgrounds, in different programs. This program also seek to control the quality and continuity of design solutions in different areas, to generate new methods for new user experiences in the processes of design idea generation or strategy development, and to shape and route the current market conditions by meeting user needs through design in the new economic embodiment functioning with competition. Courses BA 567 Dynamics of Organizations FFD 572 Creativity and Design Management BA 820 Accounting and Finance for Managers BA 515 Marketing FFD 573 Design Management Studio FFD 597 Term Project Elective Courses BA 508 Strategic Management BA 537 Consumer Behaviour BA 560 Financial Accounting BA 570 Organizational Behaviour BA 571 Small Business and Entrepreneurship BA 578 Strategic Management Accounting and Control BA 803 Legal Environment of Business BA 806 Project Management BA 851 Brand Design and Management FFD 502 Current Topics in Art and Design FFD 503 Design Representation Theories FFD 557 Ecological and Bio-climatical Design FFD 563 Art, Design and City FFD 569 Advanced Materials in Design LOG 518 Logistics ans Supply Chain Management YD 501 Design Perspectives Application Requirements for International Students Who can apply? Foreign nationals Blue Card holders (Turkish citizens by birth, but released from citizenship by the Ministry of the Internal Affairs, and who can certify that their minor children who are registered in that permit are eligible for the rights stated in Law No. 5203) Foreign nationals who became Turkish citizen afterwards/dual citizens in the same status Turkish nationals who completed the last three years of their secondary education (high school) in a foreign country excluding Turkish Republic of Northern Cyprus, (including those who completed their entire secondary education (high school) at Turkish schools in the presence of Ministry of National Education in a foreign country excluding Turkish Republic of Northern Cyprus) before 01 February 2013. Turkish nationals who completed their entire secondary education (high school) in a foreign country excluding Turkish Republic of Northern Cyprus, (including those who completed their entire secondary education (high school) at Turkish schools in the presence of Ministry of National Education in a foreign country excluding Turkish Republic of Northern Cyprus) after 01 February 2013. Turkish Republic of Northern Cyprus nationals who reside there and completed their secondary education there having a GCE AL certificate, and those, who registered to high schools in other countries between 2005-2010 and hold or will hold GCE AL certificate. Who cannot apply? Turkish nationals, who completed their entire secondary education in Turkey or in Turkish Republic of Northern Cyprus. Turkish Republic of Northern Cyprus nationals (excluding the ones who completed their entire secondary education there having a GCEAL certificate, and those, who registered to high schools in other countries between 2005-2010 and hold or will hold GCE AL certificate) Dual citizens who has a Turkish citizenship by birth. (excluding the ones who completed their entire secondary education in a foreign country excluding Turkish Republic of Northern Cyprus/ those who completed their entire secondary education at Turkish schools in a foreign country excluding Turkish Republic of Northern Cyprus) Dual citizens who has a Turkish Republic of Northern Cyprus citizenship (excluding the ones who completed their entire secondary education there having a GCEAL certificate, and those, who registered to high schools in other countries between 2005-2010 and hold or will hold GCE AL certificate) Turkish nationals or dual citizens, who have a Turkish citizenship by birth, that attend schools affiliated to the embassies in Turkey, and foreign high schools located in Turkey. [-]

Master in Furniture Design

SCAD - The Savannah College of Art and Design
Campus September 2017 USA Savannah

The SCAD furniture design program is grounded in the context of a robust art and design university, where students create furnishings that are thoughtful, ergonomic, beautiful and sustainable. [+]

Furnish your future for success The SCAD furniture design program is grounded in the context of a robust art and design university, where students create furnishings that are thoughtful, ergonomic, beautiful and sustainable. Collaborations with peers in related creative spheres lead to groundbreaking projects like SCADpad® , where SCAD furniture design students innovated micro-housing furniture solutions that were both functional and breathtaking. Opportunities just like these await you at the university for creative careers. M.A. in furniture design Available at: - Savannah SDES 501 Visual Communication and Presentation* SDES 502 The Human Factor, Design Thinking* SDES 503 Fundamentals of Graduate Research* FURN 708 3-D Computer-aided Design for Furniture FURN 715 Methods in Furniture Fabrication FURN 732 Evolution of Furniture Design FURN 738 Furniture Studio: Design and Implementation FURN 748 Furniture Studio: Process and Prototype FURN 749 Furniture Design M.A. Final Project — 700-level ARLH or ARTH elective — Directed elective† — 500- to 700-level elective Total course of study: 45 hours* M.F.A. in furniture design Available at: - Savannah SDES 501 Visual Communication and Presentation* SDES 502 The Human Factor, Design Thinking* SDES 503 Fundamentals of Graduate Research* FURN 708 3-D Computer-aided Design for Furniture FURN 710 Issues in Furniture Design FURN 715 Methods in Furniture Fabrication FURN 732 Evolution of Furniture Design FURN 738 Furniture Studio: Design and Implementation FURN 742 Directed Research in Furniture Design FURN 748 Furniture Studio: Process and Prototype FURN 754 Directed Studies I: Thesis Research, Application and Design FURN 764 Directed Studies II: Thesis Development, Execution and Exhibition FURN 770 Professional Portfolio: Entrepreneurial and Business Strategies FURN 779F Graduate Field Internship† FURN 779T Graduate Teaching Internship† FURN 790 Furniture Design M.F.A. Thesis — 700-level ARLH or ARTH elective — Directed elective‡ — 500- to 700-level elective — 500- to 700-level elective — 500- to 700-level elective — 500- to 700-level elective Total course of study: 90 hours* Careers in furniture design Become a furniture designer. Become a design consultant. Become a product engineer. As a student at SCAD, you will gain valuable experience by participating in industry-sponsored projects with brands like Urban Outfitters, Steelcase, C.H. Briggs, Davis Furniture and Hickory Business Furniture. These opportunities help students hone their strategic design expertise and build their portfolios, often leading to internships and careers. Launch your career as a professional: Contract or residential furniture designer Hospitality furniture designer Design consultant Exhibit designer Limited-production furniture designer Fixture and display designer Custom lighting designer Product designer Environmental designer And get recruited and hired by the best of the best: American Institute of Architects David Trubridge Design Dwell Handspun Studio KWALU Museum of Design Atlanta Savannah Morning News Studio-ZG The South magazine [-]

Master in Design for Sustainability

SCAD - The Savannah College of Art and Design
Campus September 2017 USA Savannah

At SCAD, you will have all of the tools, guidance and inspiration you need to save the world. Our design for sustainability program focuses on preparing students to pioneer organizational change, technological and material innovation, citizen advocacy and more as an industry leader. [+]

Top Part time Masters in Product Design in Asia. Design a sustainable future At SCAD, you will have all of the tools, guidance and inspiration you need to save the world. Our design for sustainability program focuses on preparing students to pioneer organizational change, technological and material innovation, citizen advocacy and more as an industry leader. You will benefit from our dynamic, collaborative environment, where revolutionary projects like SCADpad® and partnerships with the biggest brands in the world happen every day. M.A. in design for sustainability Available at: - Savannah SDES 501 Visual Communication and Presentation* SDES 502 The Human Factor, Design Thinking* SDES 503 Fundamentals of Graduate Research* DMGT 740 Sustainable Practices in Design IDUS 711 Methods of Contextual Research SUST 704 Applied Theories in Sustainability SUST 708 Principles of Sustainable Materials SUST 713 Interdisciplinary Studio I: Design Leadership SUST 748 Design for Sustainability M.A. Final Project — Directed elective† — Directed elective† — 500- to 700-level elective Total course of study: 45 hours* M.F.A. in design for sustainability Available at: - Savannah SDES 501 Visual Communication and Presentation* SDES 502 The Human Factor, Design Thinking* SDES 503 Fundamentals of Graduate Research* ANTH 701 Global Cultural Theory BIOL 700 Environmental Science and Sustainability DMGT 740 Sustainable Practices in Design IDUS 711 Methods of Contextual Research SDES 739 Biomimicry Methodology SUST 704 Applied Theories in Sustainability SUST 708 Principles of Sustainable Materials SUST 713 Interdisciplinary Studio I: Design Leadership SUST 743 Interdisciplinary Studio II: Sustainable Living Laboratory SUST 779F Graduate Field Internship† SUST 779T Graduate Teaching Internship† SUST 791 Design for Sustainability M.F.A. Thesis I: Planning and Research SUST 792 Design for Sustainability M.F.A. Thesis II: Design Execution — 500- to 700-level elective — 500- to 700-level elective Choose one concentration: Built environment ARCH 760 Sustainable Design HIPR 701 Preservation History and Theory INDS 721 Emerging Interior Materials URBA 725 Urban Ecology Management DMGT 710 Design, Chaos and Complexity DMGT 783 Design Futures: Trends, Foresight and Intuition SERV 753 Service, Innovation and Enterprise SUST 725 Design Leadership and Environmental Transformation Packaging and print media GRDS 702 Graphic Design Studio: Methodological Practice GRDS 717 Sustainable Graphic Design Practices GRDS 730 3-D Graphics Studio GRDS 754 Graphic Design Studio: Visual Information Practice Products DMGT 720 Design Innovation Development and Marketing Strategies DMGT 783 Design Futures: Trends, Foresight and Intuition IDUS 713 Industrial Design Studio I: Discovery to Design Solutions IDUS 733 Entrepreneurship for Designers Total course of study 90 hours* Careers in design for sustainability Become a landscape architect. Become a transportation planner. Become a design strategist. SCAD design for sustainability alumni implement their innovations at globally acclaimed design firms and pursue entrepreneurial enterprises. They go on to create zero-waste consumer goods, design energy-efficient homes and workspaces, and plan sustainable urban areas, armed with cutting-edge strategies crucial for success in the modern design world. Launch your career as a professional: Sustainable interior designer Building and construction consultant Design strategist Corporate social responsibility manager Landscape architect Sustainable product developer Sustainability services designer Sustainable graphic designer Transportation planner And get recruited and hired by the best of the best: American Institute of Architects Barnes & Noble Starbucks Coffee Company Hewlett Packard IDEO Intel CH2M Hill Steelcase Subaru [-]

Master in Luxury Packaging Design

Istituto Marangoni
Campus 1 year October 2017 Italy Milan

Aimed at candidates who already have a degree in graphic design, product or similar work experience. The teaching is for those who work in specific "Luxury... [+]

Master in Luxury Packaging Design

 

Aimed at candidates who already have a degree in graphic design, product or similar work experience. The teaching is for those who work in specific "Luxury oriented" markets or brands that seek to achieve a unique positioning in the cluster of luxury goods. The presentation of a portfolio and good knowledge of Adobe Photoshop, Illustrator and Indesign are prerequisites for the course. The objective is to create art directors and brand designers with a rich knowledge and informed viewpoint of creative and strategic approaches to position appropriately a brand through the communication in luxury packaging.Starting from the study of the basic techniques of 3D modeling, the curriculum explores the use of materials and visual communication, focusing on the characterisation of font types and key visuals. Following an overview of the historical and social-cultural developments of luxury goods, the learning will lead to the analysis and definition of brand values ​​for the target market. This course focuses on the advanced virtual modeling techniques and papermaking technologies available to designers as well as the graphic design aimed at luxury packaging and the identification of latest styles and trends in the world of Luxury oriented products.Acquiring strategic skills in order to build brand personality in the field of luxury, the student will be involved in the creation of a new concept of a Luxury brand product through the briefing phase with the client, building a strategic and practical application of 3D modeling techniques, and advanced prototyping. The project carried out will be concerned with the development of the Luxury brand at industry level and will involve a presentation to the client.Thanks to the command of contemporary trends in the field od luxury, the designer specializing in Luxury Packaging is able to devise innovative product strategies thanks to the briefing phase with the client, the strategic construction and the practical application of modeling techniques in 3d and prototype creation. This process will lead the learner until the realization of the final project that not only will lead packaging development of a luxury brand at industrial level, but will also include the real presentation to the client.Thanks to the in-depth knowledge of the current trends in the Fashion and Luxury industry, the designer specialized in luxury packaging is that expert highly specialized who is able to conceive innovative product strategies to give a brand an unexpected, new and real marketing added valueA designer specialized in Luxury Packaging works in a design studio or in one of the many international luxury design or fashion companies. In the range of further career opportunities available, the luxury packaging designer can find work in branding agencies, advertising, graphic design studios or in communication departments within fashion and luxury companies.... [-]


Master in Luxury Automotive Interior Design

Istituto Marangoni
Campus 1 year October 2017 Italy Milan

The course is intended for students who are have a degree in automotive design, industrial design, engineers in vehicle design or an equivalent as well as for... [+]

Master in Luxury Automotive Interior Design

 

The course is intended for students who are have a degree in automotive design, industrial design, engineers in vehicle design or an equivalent as well as for those who have substantial experience in the field. The aim of the course is to prepare design specialists in high-end interiors. They are capable of developing projectual solutions to specific automotive interiors field, using innovative and vanguard techniques and materials.The course is focused on the development of a project with the aim of covering each phase, that allow to translate the conceptual idea into an interior design solution for such spaces. Under the supervision of skilled tutors, the learners will show their ability to work in teams and learn the specific language of the sector. They will learn how to use the tools in technical drawings, 3D modeling, research methodologies and how to create solutions that are in line with market needs and the company brand identity.Starting from the brief with the client, the students will develop further projects, in collaboration with important companies in the sector, showing their ability to independently manage all aspects of development. They will respect to lead times, proper use of professional tools, the organization of the development process all the way to the final presentation. Tutors will guide the process with particular emphasis on the quality of the work on the basis of research methods used to generate ideas that are innovative and coherent with the style of the company brand, as well as the communicative ability regarding the work. The final project will be judged by the company that commissioned the project.Designers of such “mobile” spaces are able to integrate the concept of ergonomics and comfort into the concept of beauty and contemporaneity, so as to create spaces that are able to generate sense of wellbeing in interiors for automotive design. Such  specialized and skilled professionals are able to interpret these reduced spaces and the effects of materials and lighting upon them, in order to make alternative solutions with high qualitative content, in line with the brand and specifications of the project. .  Specifically, they will design the interiors of yachts, luxury campers, the first and business classes of airplanes and trains, as well as suites on cruise ships..At the end of the training path learners will be able to work as freelance designers or for one of the many professional studios in the field of automotive design, relevant industries, shipping yards, etc.  ... [-]


Master in Fine Jewellery Design

Istituto Marangoni
Campus 1 year October 2017 Italy Milan

The course is intended for those who already have a degree and a portfolio that contains examples of jewellery design. students are taught to design... [+]

Master in Fine Jewellery Design

 

The course is intended for those who already have a degree and a portfolio that contains examples of jewellery design. students are taught to design jewellery collections, which combine creativity, research and innovation. acquiring the advanced knowledge of the Italian and international manufacturing tradition permits the student to create jewellery that is in line with current trends in the market and with the image of the brand requirements.  Starting from the study of the materials used in fine jewellery and application of drawing tools for visual representation of their ideas, the student will deepen the analysis of jewellery design, in order to develop new proposals aimed at a contemporary market. The study of a project that references an international fine jewellery company, allows the student to study the characteristics of excellence in process and product related to the brand.The student will go on to use a creative approach and make a collection of jewellery designs aimed at the current market for a leading company in the sector of 'Made in Italy' fine jewellery. This work will also include the creation of a prototype in the workshop through the development of all phases of project development, from the graphic design and 3D visual proposals to the final construction. In addition, the student will gain knowledge about research methodologies, management and marketing.The designer and jewellery maker has complete knowledge of the theoretical and technical skills in fine jewellery design and production. This professional is an artist, jewellery maker and designer who can develop collections in line with international professional standards. the creative individual meets the current demands of the market and the brand image of the customer for whom they work. They understand each stage of the production process, by taking into account the marketing and management strategies as well as the communication and promotion of the product.The designer and creator of jewellery works freelance or, alternatively, in one of the many companies that deal with fashion and luxury jewellery in national and international contexts.... [-]


Master in Italian Product Design

Istituto Marangoni
Campus 8 months October 2017 Italy Milan

The course is aimed at students who already have a degree in design, architecture, engineering or in a similar field, with a portfolio and/or professional... [+]

Master in Italian Product Design

 

The course is aimed at students who already have a degree in design, architecture, engineering or in a similar field, with a portfolio and/or professional experience in the projectual sector.  Indispensable requirements are the knowledge of rhino software, autocad (or similar) and the Adobe software suite (Photoshop, Illustrator, Indesign). The course will develop through discovery and augmentation of production in design, from its close contact with the realities of industry and the cultural changes that influence consumer behavior.Starting from a trends analysis of the contemporary life styles, consumptions and emotional perceptions the learner will identify the knowledge of the project to be developed. Learners will work both individually and in groups on specific projects proposed by tutors and by industry live projects.  They will have to integrate their creativity with the knowledge of the technical features of materials and with the application of emerging technologies. Thanks to the graphic representation and to the realization of small prototypes they will better understand the interaction of such objects with surrounding space and to evaluate its functional and ergonomics aspects.Thanks to the study of the history of Italian Design through the analysis of cult product of the Made in Italy the learners will approach with the aesthetic sense which is one of the main feature of the successful Italian style around the world.They will be invited to identify and progress a project pathway and apply theoretical knowledge to design practice. Through working with design professionals and companies they will build their skill and potential as creative practitioners. The depth of knowledge and research on issues such as industry, entrepreneurship, market, the consumer, trend and communication will be important elements to consider and inform project proposals. In the course will include some very important designers’ case histories, that will follow step by step the development of the projects made by participants to the course.The professional is a ‘designer at 360°’, whose thoughts and ideas are a point of reference for future living. The designer is concerned with the world of products and objects, and has to handle the complexities of design in the light of cultural influences, a need for vision and expertise. Designers must establish effective relationships with companies and the market, in harmony with their own personal approaches to design, which enables the delivery by the project stakeholders of a challenging creative design vision. Their capacity for ideas and the selling of them will lead to achieve the right design proposal and successful communication of it.Product designers find very diverse career opportunities in technical studios of prestigious design companies, in the role of art director both as a permanent or as temporary solution or as a creative consultant and project manager. Alternatively the; designers may successfully work as freelance designers or consultants.... [-]