Part time Master's Degree in Computer Engineering in Europe

See Part time Masters Programs in Computer Engineering in Europe 2017

Computer Engineering

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Master in Computer engineering, this is a degree of engineering that have a major focus on software development and engineering but will also touch on the physical nature and functions of a computer integrating electrical engineering.

In all, there are over 4000 Higher Education Institutions in Europe offering a wide range of courses at Bachelor, Masters and Doctorate level. With more and more of these organizations offering English as the language of education for at least some of their degree programs, universities in Europe are now of higher quality than ever before. Universities in Europe offer a friendly welcome to foreign students and to give a course of knowledge that meets their profession needs in today’s global demand.

Start Today Best Part time Master's Programs in Computer Engineering in Europe 2017

Read More

Master's Programme in Embedded Sensor Systems

Mid Sweden University
Campus 2 years September 2017 Sweden Sundsvall

Embedded sensors can be found in home and consumer electronics, medical electronics, in vehicles, within industry, army and aviation, and even in space. The Master’s programme teaches you how to design embedded sensor systems and how to connect them to different products, programmes and apps and their features. The Master’s Programme in Embedded Sensor Systems was developed in cooperation with the industry and researchers and therefore, it responds to current and future market needs. [+]

Top Part time Masters in Computer Engineering in Europe. Embedded sensors can be found in home and consumer electronics, medical electronics, in vehicles, within industry, army and aviation, and even in space. The Master’s programme teaches you how to design embedded sensor systems and how to connect them to different products, programmes and apps and their features. The Master’s Programme in Embedded Sensor Systems was developed in cooperation with the industry and researchers and therefore, it responds to current and future market needs. This programme will provide you with broad knowledge of the different technologies that form the construction basis of embedded sensor systems. You will also gain understanding of the methods and tools you need for analysis and construction, both on an overall level and in-depth. In addition, you will learn to put your theoretical knowledge to practical use by means of close cooperation with the industry, in which you work with some of the companies’ real research projects. During your studies you will learn everything from the construction and programming of embedded systems to the connection to other features. The programme covers all the important parts of the process, such as data collection, processing, communication and energy supply considering the underlying technologies; design method, optimization, energy/power efficiency and measurement system. Our students work in projects, both individually and in groups, to gain advanced knowledge in different areas. The programme is taught in English, which will increase your opportunities on the global job market. Entry requirements Degree of Bachelor,... [-]

Master of Engineering Science in Electronic & Computer Engineering

UCD College of Engineering and Architecture
Campus 1 year September 2017 Ireland Dublin

The MEngSc in Electronic & Computer Engineering is a year-long programme designed to provide training for engineers who wish to work at a high level in the electronic and computer sectors worldwide. [+]

MEngSc Electronic & Computer Engineering Graduate Taught (level 9 nfq, credits 90) The MEngSc in Electronic & Computer Engineering is a year-long programme designed to provide training for engineers who wish to work at a high level in the electronic and computer sectors worldwide. You will develop an advanced understanding of the theory and technology of modern electronic and computer systems and their business environment. You will build your knowledge through taught modules and project work and you will learn about design, innovation and problem solving at a level significantly beyond that of your primary degree. Delivered by a highly research active School holding 101-150 in the QS World Subject Rankings, this masters provides intensive training to up-skill students to meet the needs of the growing Irish ICT sector. The balance of the programme between theory and practice will provide you with an excellent basis to work as an engineer in many different types of industry Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes This programme is aimed at graduates with an honours Bachelor's (first cycle) degree in electronic engineering or a closely related discipline. Course Description The electronic and computer sectors continue to change the way we live, and drive a significant fraction of the world economy. This comes about through constant innovation, led by creative people with a strong understanding of the fundamentals of their field. This programme will help you to join... [-]

Master of Data Science

Harbour.Space
Campus 2 years Open Enrollment Spain Barcelona

The MSc Data Science programme is designed for those who desire to deepen their comprehension of all aspects of the data sciences. Applicants could be graduates from other degrees with a strong mathematical core, or those continuing their academic pursuit after achieving a BSc in data science. [+]

Top Part time Masters in Computer Engineering in Europe. This program is taught in ENGLISH. The data science is a new frontier of human knowledge and a new domain of discovery. Data scientists have the analytical and programming skills needed to extract valuable knowledge out of data. The burgeoning technology sector is quickly becoming the epicentre for data science. The MSc programme is designed for those who desire to deepen their comprehension of all aspects of the data science. Applicants could be graduates from other degrees with a strong mathematical core, or those continuing their academic pursuit after achieving a BSc in data science. PROGRAM STRUCTURE Year 1 Students begin the programme with foundational knowledge of programming and mathematics, including data structures and algorithms, statistics and machine learning. During the first year their knowledge of mathematics, programming and data analysis will be significantly extended. The programme also offers the opportunity to obtain key soft skills for the professional world including technical project management, writing and presenting. Finally, students are expected to attend a substantial amount of talks and workshops offered by the university, as well as working on the Capstone project. Modules Combinatorics And Graphs Big Data Analysis/Machine Learning - 2 Object-Oriented Programming (C++) R Data Structures and Algorithms Convex Optimization Databases Leadership and Group Dynamics Theory of Probability and Statistics Technical Writing and Presenting Practical Unix Сomplexity Theory Introduction to Interaction Design Technical Project Management Discrete Optimization Nonlinear Optimization Master's Machine Learning Statistical Data Analysis Python Capstone Project -... [-]

Master in Computer and Automation Engineering

University of Siena
Campus 2 years October 2017 Italy Siena

The MSC in Computer and Automation Engineering aims at providing high-level competences for the design, management, development and innovation in the fields of advanced hardware and software architectures, and of control systems and robotics. In particular, the program is focused on human-machine interaction in a wide sense, spanning topics such as artificial intelligence, machine learning, high performance processing of massive data... [+]

PHYSICS, ENGINEERING, MATHEMATICS AREA from 05:00 to 07:00 pm Presentation of the Master degree courses by the Head of the Department of Information Technology and Mathematical Sciences Prof Andrea Garulli, and by the vocational guidance Deputy, Prof Domenico Prattichizzo and Prof Luca Chiantini: - Computer and Automation Engineering - Electronics and Communications Engineering - Engineering management - Applied Mathematics Master in Computer and Automation Engineering LM-32 - 120 CREDITS · Language: English (level B1 required) · Specializations: Information systems, Robotics and automation · Years: 2 · Numerus clausus: No The MSC in Computer and Automation Engineering aims at providing high-level competences for the design, management, development and innovation in the fields of advanced hardware and software architectures, and of control systems and robotics. In particular, the program is focused on humanmachine interaction in a wide sense, spanning topics such as artificial intelligence, machine learning, high performance processing of massive data collections, human-robot interfaces, and systems for production automation. The program provides advanced competences in the area of computer and automation engineering. To get admission in this course of studies students must possess: a background in mathematics, statistics and physics, equivalent to the one achieved in first-level (B.A.) engineering degrees; basics principles of computer science, control, electronics and telecommunications; basic programming skills. Study plan 2015/16 Specialization Information systems taught in English first year · Automata and queueing systems 6 ECTF · Advanced digital image processing 9 ECTF · High performance computer architecture 9 ECTF · Machine learning 6 ECTF · Advanced... [-]

Master In Mobile Development

ISDI
Campus 6 months September 2017 Spain Barcelona

It is covering innovative Master iOS and Android environments, business strategy and management of mobility projects. Know in depth the potential of devices, technologies and communication channels and mobile marketing, to transfer to business strategy achieving competitive advantages and new opportunities for business development. [+]

Top Part time Masters in Computer Engineering in Europe. It is covering innovative Master iOS and Android environments, business strategy and management of mobility projects. Know in depth the potential of devices, technologies and communication channels and mobile marketing, to transfer to business strategy achieving competitive advantages and new opportunities for business development. Who should attend Experienced programmers who want to train holistically in mobile programming in the most demanding environments. Responsible for technological development (CTOs) that need to incorporate mobile technology in their management. Startups and entrepreneurs who want to implement business ideas in the mobile environment. GOALS comprehensive view of the framework of existing mobile technology currently has its advantages and disadvantages. Programming and development environments iOS and Android demanded in the market. practical application, backbone project that will result in an app on another iOS and Android with marketing and business plans. Entrepreneurship, have the necessary for generating successful business models in the field of mobile technologies tools. Content 4 modules (in Spanish) Modules Module 1. Technology Module 2. Android Module 3. iOS Module 4. Business Core project Two specialization courses (E-learning) THE ADMISSION PROCESS FORM - If you're interested, you can fill out the application form. INTERVIEW - I will quote a person responsible for the admissions committee for a personal guidance interview in our offices or via videoconference. After the interview, we will give our assessment in writing. RESERVE PLAZA - To secure your place, you must make the payment of tuition. In the acceptance... [-]

Master in Automation and Computing in Industrial Technologies

Technical University of Ostrava
Campus 2 years September 2017 Czech Republic Ostrava

The Branch is focused to the exploitation of computers and automation of technological processes above all in the metallurgical industry by application of knowledge in the field of theory of automated control, integrated computer systems, modern methods of control with exploitation of artificial intelligence and applied informatics and control of technological aggregates and processes. [+]

Study Branch Economics and Management of Industrial Systems Branch Profile The Branch is focused to the exploitation of computers and automation of technological processes above all in the metallurgical industry by application of knowledge in the field of theory of automated control, integrated computer systems, modern methods of control with exploitation of artificial intelligence and applied informatics and control of technological aggregates and processes. Key Learning Outcomes Knowledge advanced scientific methods of modelling, simulation and optimal control of dynamic systems, modern tools and techniques for designing and implementation of complex control systems based on programmable logic controllers, programming of information systems and modern control methods, detailed knowledge of industrial technologies, especially in the field of metallurgy and related technologies. Skills independent control of production and technological processes, particularly in the metallurgical enterprises ability of creative synthesis of gained technological knowledge in the field of metallurgy, knowledge of control methods and implementation of control and information systems, ability of independent analysis, design and implementation of control systems for technological processes especially in metallurgical industry field by means of application of modern computing, measurement and automation tools. General Competencies General competences within the scope defined by the national descriptors of the Czech qualifications framework with an emphasis on communication skills, management and organizational skills, ability to communicate in at least one foreign language, etc. Occupational Profiles of Graduates This unique engineering field of study follows on the bachelor’s study program and expands and deepens knowledge and practical abilities in the automation and... [-]

Master in Software, Systems and Services Development in Global Environment

University of Oulu
Campus 2 years September 2017 Finland Oulu

The Department of Information Processing Science at the University of Oulu organizes a two-year full-time Master’s degree programme in Software, Systems and Services Development in the Global Environment (GS3D). [+]

Top Part time Masters in Computer Engineering in Europe. Master in Software, Systems and Services Development in Global Environment The Department of Information Processing Science at the University of Oulu organizes a two-year full-time Master’s degree programme in Software, Systems and Services Development in the Global Environment (GS3D). Graduates from GS3D will have the competence to work as Experts and Managers in global ICT companies. The programme will provide multidisciplinary knowledge of software, systems and services development in a global context. Graduates will acquire the skills to understand and to analyze the dynamics of the software business environment. Students can progress with their studies to PhD and participate to GS3D research groups. Programme Outline The degree includes: Compulsory Studies - 95 ECTS Optional Studies - 25 ECTS Compulsory Master's studies include intermediate subject courses which will deepen into more advanced studies. The advanced courses form the core of the Master's programme, as they tackle the deeper aspects of the topics introduced in the earlier courses. Studies will have a basis in research and a significant portion of time will be used for the preparation of the Master's Thesis. Its purpose is to develop a student's readiness for the independent acquisition of scientific knowledge, identifying problems, analysing them, and forming a solution to them. Optional studies include either courses of information processing science or minor studies in other sciences. Courses range from 1 to 7 ECTS composing a wholeness of 25 ECTS. Learning outcomes By completing the Master’s level studies in... [-]

Master in Computational science

Vrije Universiteit Amsterdam
Campus 2 years September 2017 Netherlands Amsterdam Rotterdam

Computational science is a discipline that has established itself as the third pillar of modern science (alongside theoretical and experimental science), and involves... [+]

Master in Computational science

 

Would you like to confront a tornado in virtual reality and predict its intentions? Or understand the behaviour of financial markets? What if you could simulate the outcome of a surgical procedure before it is put into practice? Or predict how a crowd would move in the event of a disaster?Computational science is a discipline that has established itself as the third pillar of modern science (alongside theoretical and experimental science), and involves the modelling, simulation and analysis of world phenomena through computation. This has opened up new windows onto the physical and social sciences, earth sciences and life sciences at many levels of scale.... [-]


Master in Computer Engineering and Management - taught in FRENCH

University of Mons
Campus Part time 2 years September 2017 Belgium Mons

The Computer Science, Management and Engineering course programme responds to two essential requirements of our time: on the one hand, the ever-growing need to computerise businesses, and on the other hand the need to manage activities more and more efficiently. [+]

Top Part time Masters in Computer Engineering in Europe. This program is taught in FRENCH. This master is organised in daytime and in part-time. The Computer Science, Management and Engineering course programme responds to two essential requirements of our time: on the one hand, the ever-growing need to computerise businesses, and on the other hand the need to manage activities more and more efficiently. Engineers have natural skills placing them at the forefront of computer science. They also have the ability to make a rational and methodical contribution to business management. Profile of the programme The courses focus on business management: human resources and communication, marketing, financial analysis and economic and financial calculations, managing innovation, team building, etc. management mathematics and operational research: mathematical programming, stochastic models of operational research, decision-making and management support, computer-aided manufacturing, etc. computer science: programming methodology and languages, databases, software engineering, artificial intelligence, system security and administration, etc. Personal assignments play a central part in the students’ training. They allow them to implement the scientific concepts taught in lectures and to acquire those skills gained mainly by experience, such as groupwork, leadership, time and deliverables management, conflict management, autonomy, … Therefore half of the programme is dedicated to guided personal projects linked to research fields in the Computer Engineering and Management specialism (decision-making, optimization, artificial vision, grid computing, innovation management, creativity). Students may complete part of their Master’s course (6 months) in other universities, such as Barcelona, Poznan, Dublin, … within the framework of the... [-]

Master’s degree in Computer Engineering ( taught in Italian )

University Of Bergamo
Campus October 2017 Italy Bergamo

The course provides skills considered fundamental for the profession, but also addresses specific skills. The goal is to train an engineer with expertise in the areas of computer systems, information systems, industrial automation and information technology, advanced hardware and software architectures, control of processes and electronic systems. [+]

EDUCATIONAL OBJECTIVES The course provides skills considered fundamental for the profession, but also addresses specific skills. The goal is to train an engineer with expertise in the areas of computer systems, information systems, industrial automation and information technology, advanced hardware and software architectures, control of processes and electronic systems. Graduates will be able to use these skills in the design of computer systems and use of advanced information technologies for industrial automation. The curricula provided are: Networked Information Systems Industrial Informatics Mechatronics JOB OPPORTUNITIES Computer industries Industries for automation and robotics Businesses operating in the area of information systems and computer networks Service companies Industries with high use of tools and services. ADMISSION A Three-Year First level Degree or equivalent. ENTRY TESTS Individual interview. [-]

Master in Computer Engineering and Information Systems

Universidade Lusófona de Humanidades e Tecnologias
Campus 2 years October 2017 Portugal Lisbon

The degree is supported by a solid study program and occupies an innovative position in the converging scientific [+]

Top Part time Masters in Computer Engineering in Europe. Objectives - Promoting and acquisition of theoretical and technical skills in disciplines considered as structuring in the areas approached; - Allow the students to establish a customised progression through the possibility of choosing between specific advanced disciplines in each of the proposed branches; - Provide a professional learning experience through laboratory and analysis practice of real use cases, in order to guarantee an adequate balance between the theoretical plane and its most recent technological developments; - Include and put into perspective all aspects of teaching given in the academic and corporate realities, associated to this sector in our Country. Thus, we propose a teaching model organised in: - Master Classes that correspond to theoretical magisterial classes, taught by Master Degree professors and by national and foreign guest specialists to work in the scope of the research projects developed during the degree and - Advanced technical training laboratory classes, where the acquisition of skills for the development of applied projects is promoted. Knowledge, abilities and skills to be acquired This degree aims to promote the acquisition of advanced skills in the areas of Computer Engineering and Information Systems, namely those that refer to individual work, supported in skills acquired in research activity, as well as application in professional activity of the principles used in the methodologies of this project. This way, the Master’s degree will provide the analysis and information processing skills inherent to the execution of tasks for research and development... [-]

Master in Electronics and Computer Engineering (Thesis/Non-thesis)

Istanbul Sehir University
Campus 3 - 6 semesters September 2017 Turkey Üsküdar

The Electronics and Computer Engineering (ECE) Master's Program was designed for students with backgrounds in electronics engineering and computer sciences. The experience of the past 2 decades have shown that complex systems from the small (smart cards, mobile phones) to the large (Internet, networked storage, server farms) can be only designed and developed by teams of electronics engineers and computer scientists, since they consist of hardware and software components that have to interact and cooperate with one another. [+]

The Electronics and Computer Engineering (ECE) Master's Program was designed for students with backgrounds in electronics engineering and computer sciences. The experience of the past 2 decades have shown that complex systems from the small (smart cards, mobile phones) to the large (Internet, networked storage, server farms) can be only designed and developed by teams of electronics engineers and computer scientists, since they consist of hardware and software components that have to interact and cooperate with one another. Such systems are now the driving forces of our daily lives, from medical technology to Internet banking. The aim of the ECE MS Program at Sehir is to provide our graduates the necessary and sufficient scientific and technical backgrounds, hardware and software design tools, and methodical approaches in hardware/software co-design. Our graduates will have in-depth knowledge and dexterity in design tools, and will be able to specialize not only in classical areas of electronics engineering and computer science, but also in mathematical, computational, physical, and life sciences. The ECE Master's program can be completed in one-year (2 academic-year terms and one summer term). ADMISSION REQUIREMENTS Graduate Programs in the GS-NAS are for students with an undergraduate degree (UG) in engineering, technology, sciences (such as physics and mathematics) and business/economics. Students with a different background and/or have not completed coursework listed below may be required to take some additional courses in the scientific preparation program: Analysis, differential equations and linear algebra Computer programming in one of C++, FORTRAN or Java Probability and Statistics... [-]

Master in Human Computer Interaction and Design (HCID)

EIT Digital Master School
Campus 2 years September 2017 Germany Berlin Netherlands Eindhoven Finland Espoo United Kingdom London France Paris Sweden Stockholm Italy Trento Hungary Budapest Spain Madrid + 15 more

The programme in Human Computer Interaction and Design focuses on study, design, development and evaluation of novel user interfaces and interactive systems taking into account human aspects, at the cognitive and sensory-motor levels, technological aspects, as well as business aspects. [+]

Top Part time Masters in Computer Engineering in Europe. Why study the EIT Digital Human Computer Interaction and Design programme? The EIT Digital HCID programme offers: Front line technical content within the field Studies at two of Europe´s foremost technical universities leading to a double degree. A good integration with tailored Business courses in Innovation and Entrepreneurship A thesis work well grounded in industrial problems Access to the competence of eight EIT Digital innovation action lines at least through a summer school between the two years. Access to the co-location centers and innovation ecosystems of the nine EIT Digital nodes. What is the programme all about? The programme in Human Computer Interaction and Design focuses on study, design, development and evaluation of novel user interfaces and interactive systems taking into account human aspects, at the cognitive and sensory-motor levels, technological aspects, as well as business aspects. The HCID programme is an interdisciplinary programme that offers courses on design and evaluation of interactive systems with a strong emphasis on user-centered design techniques: understanding the human capacities and consequences of using information technology as a tool for solving work related tasks, and developing and evaluating the systems by putting the user at the center of the design process. In addition, the program will create a business thinking in terms of user profiles, user segments, house style, branding, and market development and product introductions. What are the career opportunities for graduates from the programme? Graduates from the HCID master’s programme will qualify for... [-]

University/Inter-university Master’s Degree in Computer Security Engineering and Artificial Intelligence-1st edition

Universitat Rovira i Virgili
Campus 1 year September 2017 Spain Tarragona Portugal Tomar France Bordeaux Barcelona + 4 more

This master's degree aims to provide students with professional training in computer engineering, telematic engineering and related ambits that specialise in Computer Security and Artificial Intelligence. [+]

Master's Computer Security Engineering and Artificial Intelligence-1st edition This master's degree aims to provide students with professional training in computer engineering, telematic engineering and related ambits that specialise in Computer Security and Artificial Intelligence. Specifically, the master's degree: provides students with the skills to use advanced ICT for designing and implementing safe intelligent systems. provides students with the skills to use advanced ICT to ensure the safety of information in applications, services and ICT systems and the privacy of their users. provides students with the skills to lead, manage and carry out ICT systems projects based on Artificial Intelligence. provides students with the skills to innovate and conduct research in the field of Computer Security and Artificial Intelligence. Career opportunities The Master's produces professionals with the skills to work in the following positions, among others: Head of Computer Security and Artificial Intelligence projects. Management of groups of developers for Computer Security and Artificial Intelligence projects. Analyst of advanced ICT applications, particularly in the ambits of Computer Security and Artificial Intelligence. Academic and research career in universities and research centres. Language of instruction English. Student Profile Students wishing to study the master's degree should possess the following personal and academic qualities: Bachelor's degree in computer engineering Knowledge of Engineering Programming and Mathematics. Personal maturity and skills deriving from their previous university training that will be strengthened and improved further by the master's degree (e.g. work planning, knowledge of information research tools, oral and written communications skills, English, the ability to work... [-]

Master in Software Engineering

University of Gothenburg Department of Computer Science and Engineering
Campus 4 semesters September 2017 Sweden Gothenburg

The master’s programme in Software Engineering is based on one of our strong research profiles and is also run in very close collaboration with industry. The programme is coupled to the newly established Software Center, which is a joint initiative by Chalmers and University of Gothenburg together with industry partners. [+]

Top Part time Masters in Computer Engineering in Europe. The master’s programme in Software Engineering is based on one of our strong research profiles and is also run in very close collaboration with industry. The programme is coupled to the newly established Software Center, which is a joint initiative by Chalmers and University of Gothenburg together with industry partners. The programme focuses on three key roles in software system development: Software Project Manager, Software Architect, and Software Quality Manager. The main perspectives for each of these roles are: - Understanding industrial practices - Supporting practices with new methods and tools - Innovating practices to improve performance The master’s education in Software Engineering is targeting students who want to deepen their knowledge about model-driven engineering, software architectures, quality management, project management, and gain practical experience from working in software projects. There is also a potential for deeper studies in programming and design. By working closely together with both researchers and practitioners in projects, you receive a wide range of opportunities to shape a career in industry or academia. The programme is structured around a set of recommended courses in the area of software engineering specialising in the following areas: - Managing software projects - Software architecture and modelling - Verification and validation - Implementation The education is to a large extent project- and problem-based, supervised by both researchers from the university and practitioners from industry. The students are working with real-world problems with connection to both research and practice. Compulsory courses... [-]