Part time Master's Degree in Automotive Engineering

Compare Part time Masters Programs in Automotive Engineering 2017

Automotive Engineering

A Masters degree gives you the opportunity to either further your understanding of a particular question or take off in a completely different way using skills you have gained from your previous undergraduate degree.

In an automotive engineering program, students have the opportunity to learn about an array of methodological operating systems that are present throughout the industrial engineering industry. This may support their studies as they pursue courses that may cover topics like mechanics, materials, energy and management.

Request Information Part time Masters Degrees in Automotive Engineering 2017

Read More

Master of Automotive Systems

HAN University of Applied Sciences
Campus Part time 18 months September 2017 Netherlands Arnhem

Based entirely on current demands and requirements in the field, the curriculum directly reflects major trends in the vehicle development industry. It focuses on exciting new developments such as intelligent vehicle systems (vehicle dynamics and control, driver [+]

Best Part time Masters in Automotive Engineering 2017. Focus on latest trends in the industry Based entirely on current demands and requirements in the field, the curriculum directly reflects major trends in the vehicle development industry. It focuses on exciting new developments such as intelligent vehicle systems (vehicle dynamics and control, driver assistance) and advanced propulsion design (driveline and powertrain). This Masters course will provide you with skills and knowledge relevant to the latest developments in the automotive industry. The course is internationally oriented and taught entirely in English. A career in the automotive industry If you have attained your Bachelors in Automotive Engineering, Mechanical Engineering or Electrical Engineering and wish to further your education and career prospects in the automotive field, this Masters course is for you! The course prepares you for specific development and design positions. Areas within the industry that you can move into as a Masters graduate include software and test engineering, development and design engineering, applied research, production management, sales engineering and customer service. Master of Engineering in Automotive Systems HAN University of Applied Sciences has an excellent international reputation with over 60 years' experience in teaching and research in automotive technology. On successful completion of the course, you will be awarded a Master of Science. Full-time or part-time course taught in English The Masters course in Automotive Systems is taught entirely in English. You can combine your work and studies by choosing the part-time option. If you opt for studying full-time in the Netherlands,... [-]

Master in Transportation and Car Design

Scuola Politecnica di Design SPD
Campus 15 months October 2017 Italy Milan

The Master programme embraces the entire design development process by researching into new experiential concepts, redefining architectural solutions and moving forward with new criteria for comfort and efficiency. Today’s design paradigm must be brought into question in order to better interpret new aesthetic and social trends. The studio projects, organized in collaboration with major car companies... [+]

The Master programme embraces the entire design development process by researching into new experiential concepts, redefining architectural solutions and moving forward with new criteria for comfort and efficiency. Today’s design paradigm must be brought into question in order to better interpret new aesthetic and social trends. The studio projects, organized in collaboration with major car companies, represent a proving ground to test the students’ ideas. In particular SPD has signed a long term educational partnership with Volkswagen Group Design involving the participation of designers from the various brands – from Audi to Lamborghini – into the teaching activites. After the initial exploration, students move forward into design concepts and their refinement up to both physical and digital modelling. It’s a long process that demands a high level of personal committment and flexibility, organizational and time management skills as well as a strong attitude to teamwork. Projects are subject to group critiques and critiques with outsider reviewers. Transportation designers thus acquire a constant spur to innovation both in form language and function, allied with the understanding of engineering and production processes. ADMISSION Upon selection the Master admits graduates in Transportation or Car Design, Industrial Design, Vehicle Engineering or their equivalents, and candidates who have gained significant professional experience in the field. The program has a limited number of places available. Applicants will be admitted upon selection based on the student’s CV, portfolio and on an interview. DURATION The Master lasts 15 months (from October to December of the following year, with... [-]

Masters In Traffic, Mobility And Road Safety

IMF Business School
Online Part time 12 months Open Enrollment Spain Madrid

This Master of MFIs in collaboration with the University Camilo Jose Cela provides the expertise to design road safety systems that allow to obtain the ISO 39001 certifications, and other existing on the market, and promote sustainable mobility in their performance environments [+]

Best Part time Masters in Automotive Engineering 2017. The World Health Organization (WHO) identifies 2030 sequelae injuries and accidents as a leading global burden factors affecting the health and safety of the population. Currently, traffic accidents a year cause more than 1.3 million deaths and between 25 and 52 million serious injuries. WHO has promoted the Decade of Road Safety globally. Major Public Entities and Business are introducing new models of management and traffic systems, mobility and road safety to reduce the risks of accidents and optimize their resources mobility. These efforts are succeeding in reducing traffic accidents and additionally generating economic value and cost reduction in the balance sheets. This Master of MFIs in collaboration with the University Camilo Jose Cela provides the expertise to design road safety systems that allow to obtain the ISO 39001 certifications, and other existing on the market, and promote sustainable mobility in their performance environments ADDRESSED TO: Any public or private entity that has drivers (professional or not) and vehicles (fleet) or a combination of both. WHY THIS PROGRAM The Master in Traffic, Mobility and Road safety is primarily aimed at technical prevention of occupational risks trying to define programs to reduce accidents related to the use of the vehicle and the pedestrian main sources of accidents. Also regional and technicians from different public bodies in order to prevent and reduce accidents. The aim of the course in road safety is to enable students to define mobility plans and road safety, giving tools,... [-]

Master of Engineering in Additive Manufacturing

University of Maryland, A. James Clark School of Engineering
Campus September 2017 USA College Park

The 30-credit curriculum includes 10 three-credit courses. No research or thesis is required for the degree. Six core courses and four elective courses. [+]

Additive Manufacturing is a new class of manufacturing processes with associated design principles that are being used extensively by engineers for prototyping concepts and to realize new products. It is the official industry standard term (ASTM F2792) for all applications of the technology. It is defined as the process of joining materials to make objects from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies. The curriculum has more manufacturing, materials, and design content than a standard degree in Mechanical Engineering, which is the most closely related degree program. A number of new specialized courses are being developed to support the degree. Examples of topics covered include: * Fundamentals of Additive Manufacturing Processes * Product Realization using Additive Manufacturing * Design and Optimization for Additive Manufacturing * Polymer processing for Additive Manufacturing Learning outcomes include: * understanding of material properties that govern use in AM processes * understanding of manufacturing principles for AM * understanding of design principles for AM * ability to employ AM for prototyping and product realization * ability to model AM processes * ability to perform statistical analysis of AM processes Office of Advanced Engineering Education 2105 J.M. Patterson Building University of Maryland College Park, MD 20742 [-]

Master in Systems Engineering

University College of Southeast Norway
Campus Part time 6 semesters August 2017 Norway Porsgrunn Drammen Rauland + 2 more

The Master program in Systems Engineering at NISE is a unique program in Norway due to the close and committed collaboration with international and leading high-technology companies. [+]

Best Part time Masters in Automotive Engineering 2017. Master in Systems Engineering The Master program in Systems Engineering at NISE is a unique program in Norway due to the close and committed collaboration with international and leading high-technology companies. We collaborate with our industry partners and offer internships in a variety of businesses! You can also study the Master's program in Systems Engineering part time if you already work in a company or you can study single courses (with or without study points) if you are interested in learning more about Systems Engineering and Subsea. This is Systems Engineering Systems Engineering is a recognized method for developing systems in the automotive and oil industry, in computing, networking, communication and R&D. With a Master's Degree in Systems Engineering you will be eligible to participate in and lead the development of large complex products and systems that require involvement of many disciplines. Norwegian Institute for Systems Engineering (NISE) Was established by the joint efforts of Norwegian Center of Expertise-System Engineering (NCE SE) and Buskerud University College (from 2016 University College of Southeast-Norway). NISE is organized as a department within the Faculty of Technology in Kongsberg. NISE’s most important task is to contribute to enhancing the technical collaboration between research institutions and the technology companies in NCE SE. By collaborating with the leading international research and development (R&D) university - Stevens Institute of Technology (SIT), NISE offers the expert knowledge in Systems Engineering associated with important technology disciplines such as materials, mechatronics, requirements... [-]

Masters Degree in Transport Systems Engineering

Sapienza University of Rome
Campus 2 years October 2017 Italy Rome

The Master Degree in Transport Systems Engineering aims at providing Students with high-level qualifications, so as to allow them to perform and manage a wide variety of activities connected with planning, programming, operating, monitoring transport systems and their components. [+]

The Master Degree in Transport Systems Engineering aims at providing Students with high-level qualifications, so as to allow them to perform and manage a wide variety of activities connected with planning, programming, operating, monitoring transport systems and their components. The professional skills of a Transport Systems Engineer include: methods to design transport systems: formulation of dimensional and performance specifications for system components; models for mobility of people and goods, for transport supply on multi-modal networks, for demand/supply interaction and equilibrium calculation; design and implementation of transport systems (technical and economic aspects), transport and mobility plans on different levels; on-line and off-line models for transport system operations and management; monitoring and ex-ante/ex-post assessment of mobility solutions from the technical, economic and environmental point of view. Study Program The program is organized into modules. It is composed by 120 ECTS as follows: 4 modules concerning the characterizing disciplines (48 ECTS); 4 modules concerning the characterizing disciplines chosen by the student in a optional group (24/48 ECTS); 2 modules concerning integrative disciplines (12 ECTS); 2 modules freely chosen by the student with suggestions in coherence with educational purposes of the Master Degree (12 ECTS): Other education activities proposed by the student (3 ECTS); Thesis work (21 ECTS) Admission Requirements The Master is directly open for Students with Engineering Bachelor’s degree. [-]

Master of Engineering: Mechanical-Automotive Option

University of Windsor
Campus 3 semesters September 2017 Canada Windsor

The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. [+]

Best Part time Masters in Automotive Engineering 2017. The objective of the Master of Engineering - Mechanical Engineering (Automotive Option) is to prepare graduates for leadership positions within the automotive industry. The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. At the University of Windsor, we strive to create an environment of learning, opportunity, and personal and professional growth. Our students go on to pursue careers in government, industry and at various universities across North America and the world. Our friendly and safe campus is ideal for learning about and becoming a part of the automotive industry. We are located on the Canada-United States border in the automotive and manufacturing heartland of North America. Our unique location means that we can offer our students opportunities for international study, research and work experience that no other university in Canada can match. Learn from the best The key to a great university education is the quality of its teaching and research done by its professors. At the University of Windsor, you will be interacting with world-class faculty conducting cutting-edge research in the automotive area. They will be your mentors as you prepare yourself for the careers of the future. You will combine what you learn in the classroom with practical application so that you are ready... [-]

Master's Degree in Railway Systems

Universidad Pontificia Comillas ICAI-ICADE
Campus Part time 1 - 2 years September 2017 Spain Madrid

This Master's Degree is the first officially recognized degree in railways in which the main companies in the railway sector work in close collaboration, providing academic staff, practical sessions in real railway facilities and professional internships. These professional internships complete the student's training by offering them the chance to participate in real-life projects in a railway company. [+]

Master's Degree in Railway Systems The Master's Degree in Railway Systems holds the international EUR-ACE accreditation of engineering This Master's Degree has obtained the European accreditation EUR-ACE in engineering (see report). The European Network for Accreditation of Engineering Education (ENAEE) promotes this seal of excellence with the aim of internationally identifying and recognizing the quality of degrees in the area of engineering, after successfully passing a thorough accreditation process. This process was driven by the National Agency for Quality Assessment and Accreditation of Spain (ANECA) and the Spanish Institute of Engineering. This certificate acknowledges the quality of the entire course, which encompasses the Faculty Staff, the facilities used for laboratory practice, professional internships, management and organization, update of content in a professional context, as well as the integration of graduates into the employment sector. Students will benefit from the European and International EUR-ACE seal of excellence, as well as from the opportunity to gain access to better job offers abroad. Introduction There is a current need for advanced specific training in the railway sector. It is a multidisciplinary sector that lacks explicitly tailored official studies. The range of activities are covered by civil, industrial, telecommunications, and information technology engineers, as well as licentiate degree holders in physics, economics, etc. This Official Master's Degree provides students with an insight into each and every one of the main strands of work (or business) of the railway sector, but also integrates studies to train all types of professionals in the sector. It is... [-]

Master in Automotive Electronics

Technical University of Ostrava
Campus 2 years September 2017 Czech Republic Ostrava

The goal of the master study programme Mechatronics, specialization Automotive Electronics is to prepare the graduates for work in research and development, and the design of mechatronic systems with a focus on automotive applications. [+]

Best Part time Masters in Automotive Engineering 2017. Branch Profile The goal of the master study programme Mechatronics, specialization Automotive Electronics is to prepare the graduates for work in research and development, and the design of mechatronic systems with a focus on automotive applications. Key Learning Outcomes KNOWLEDGE Graduates will have gained knowledge of mathematics, electronic circuits, information technology, communication technology as well as specialized knowledge from applied electronics. SKILLS Graduates are able to analyse the dynamic properties of the complex structure system and use the mathematical/physical modelling and simulation of dynamic systems. GENERAL COMPETENCIES The background from electrical, mechanical and control engineering allows graduates to work with complexly structured systems and to consider the interaction of different dynamic subsystems of a car. Occupational Profiles of Graduates The multidisciplinary education is a great advantage for work in different areas of engineering. Admission Requirements Determined by Dean, may include entrance examination, other formal documents. Graduation Requirement 120 ECTS Credits, Final state examination, Diploma thesis Course Structure Diagram with ECTS Credits List of courses is available at the detailed branch description page 30 ECTS credit per semester. [-]

MBA&E: Business Administration and Engineering

HTW Berlin University Of Applied Sciences
Campus 3 - 4 semesters October 2017 Germany Berlin

The weighting of the course content of the MBA&E establishes a dual focus on topics drawn equally from business administration and technological subjects. Graduates from this course are equipped not only with exceptional specialist skills, but develop an analytical mind-set applicable to a variety of industries and business functions. [+]

New! Global Procurement specialisation starting in October 2016 In 2016, we will be offering for the first time the MBA&E specialisation "Global Procurement". This specialisation is based on our 2015 survey of major German industrial companies, which revealed a strong demand for internationally oriented procurement and supply chain specialists. Further information will be added onto the MBA&E website during spring 2016. Multifaceted and interdisciplinary The weighting of the course content of the MBA&E establishes a dual focus on topics drawn equally from business administration and technological subjects. Graduates from this course are equipped not only with exceptional specialist skills, but develop an analytical mind-set applicable to a variety of industries and business functions. We seek to train every MBA&E graduate to become a robust, interdisciplinary problem solver – professional, creative and collaborative. Close to business practice As a postgraduate programme of study, the course accepts applications from students with backgrounds in engineering, management, and more. As a young professional, you already possess the in-depth skills specific to your discipline. By taking the MBA&E, you will develop a holistic understanding of the wider business process. MBA&E graduates are "gap-bridgers" – specialists in their respective functions yet fully conversant with mainstream results-oriented management practices. Global companies need such "T-shaped people" - would you like to become one? Personal and international The MBA&E family of students and graduates is drawn from over 40 countries throughout the globe. Mechanical engineering, industrial management, intercultural communication, economics, material sciences, aeroplane design, nuclear physics and software engineering... [-]

Car Interior Design - 1st Level Master Degree

IED – Istituto Europeo di Design Torino
Campus 12 months March 2018 Italy Turin

Designing interiors for the means of transport, in particular for cars, means dealing with the project of mobility starting from the user's perspective, both at the level of interaction of the man-machine system, and as experience of the phases of purchase and management of the vehicle. The Car Interior Designers specialize in the future and innovation of means of transport from the inside and builds future design scenarios by studying the user, its cultural needs, trends in society and use of the vehicle. The different subjects covered during the Master in Car Interior Design and User Experience allow future professionals to provide innovative solutions, related to the evolving needs of companies and buyers. [+]

Best Part time Masters in Automotive Engineering 2017. THIS PROGRAM IS TAUGHT IN ENGLISH Entry Requirements: The Master in Car Interior Design and User Experience welcomes IED graduates, or students from Art Academies or private schools and graduates in related areas such as Design, Architecture, Engineering and Media Design, professionals with at least two years of experience in this sector. Structure and Methodology: The Master's programme focuses on research and innovation in different sectors, with an emphasis on practical activities of design, to enable students to develop their creativity, refining tools and knowledge through a targeted and structured approach: the fundamentals of Interior design of cars, both technically and psychologically, emerging technologies, identifying layout and models of use of interior space, traditional materials and the latest generation, new trimmings, technologies and integrated platforms with a particular emphasis on interface design. From a cultural perspective, the Master in Car Interior Design and User Experience covers subjects such as the history and trends of Car Interior Design and the study of perception. Students improve their skills and techniques in the visualization and communication of ideas, forms and concepts. The laboratory of communication occurs with the practice in the advanced levels of 2D and 3D Photoshop and other industry-specific programs. The environment of the cockpit is examined in all its functionality. The user and his needs are always at the center of the project proposal. This means improving and facilitating the driving of the vehicle, the passenger compartment comfort in all aspects (functional,... [-]

Master Programme in Aeronautical Engineering

ESTACA
Campus 5 years September 2017 France Paris

Reduction in the weight of aircraft, reduction in polluting emissions, increase in aircraft capacity, development and integration of electrical commands: innovation is constant in the aeronautical sector, to reconcile economic and technical performance, in complete security. Being an engineer in aeronautics means working on the design and operation of aircraft (aeroplanes, helicopters, balloons), and embedded systems. [+]

Reduction in the weight of aircraft, reduction in polluting emissions, increase in aircraft capacity, development and integration of electrical commands: innovation is constant in the aeronautical sector, to reconcile economic and technical performance, in complete security. Being an engineer in aeronautics means working on the design and operation of aircraft (aeroplanes, helicopters, balloons), and embedded systems. This might mean the technical conduct of the development programme, carrying out tests on the ground or in flight, developing production methods, optimising quality processes, or prospecting and negotiating contracts. SPECIALISED TRAINING AND PRIVILEGED CONTACT WITH COMPANIES more than 400 hours of courses are provided by engineers from Dassault, Safran, EADS-Airbus, Thalès, etc. at least 4 implementation projects are performed during the curriculum, for example: preliminary design of Aircraft architecture (modelling); determining the weight of an airliner's wing; dimensioning an exhaust nozzle; study on functional safety for landing gear. 12 months of mandatory work-experience courses, for example: Discovering the company course in 1st year at EADS MOROCCO: Design of a computer program for monitoring aircraft maintenance; Engineer's work-experience course in 4th year at EUROCOPTER JAPAN: Research on optimising stocks of helicopter replacement parts and proposing new solutions; End-of-study work-experience course in 5th year at DASSAULT AVIATION: Study on improving acoustic comfort in the cabin of the Falcon 7X; visits to the Toulouse aeronautical sites (Airbus, CEAT test centre, etc.) and conferences ASSOCIATIONS FOR EXPRESSING YOUR INTERESTS Reconstructing the first seaplane, which made its maiden voyage in 1909: this is one of the projects undertaken... [-]

Advanced Master in Aviation Safety Aircraft Airworthiness

ENAC
Campus 1 year September 2017 France Toulouse

The main objective of air transport is to ensure the safety of the passengers, crew and people on the ground which is mainly done through aircraft airworthiness activities. Such [+]

Advanced Master in Aviation Safety Aircraft Airworthiness The main objective of air transport is to ensure the safety of the passengers, crew and people on the ground which is mainly done through aircraft airworthiness activities.

Such activities must be considered as a coherent process running from the design of the aircraft to the monitoring of its technical condition in airline service. This Mastère Spécialisé covers both the technical aspects of certification, i.e the compliance with applicable requirements and the legal implications and obligations. This course has been designed to give future managers a broad understanding of the issues and priorities which, as far as aeronautical construction is concerned, have an international dimension.... [-]


Master In Automotive Production Engineering

Fraunhofer Academy
Campus Part time 5 semesters October 2017 Germany Munich Baden-Württemberg + 1 more

In the courses, great importance is placed on a continuous interaction between theoretical and scientific knowledge and practical application. [+]

Study contents The course includes content from the three areas of expertise: A: manufacture and production technology Automotive B: Management and Leadership / Entrepreneurial activity C: Methodological and practical project skills An individual deepening of technical content is possible in elective modules. Study Organization eg preparatory courses, modules, elective and core courses etc. Admission Requirements - A first professionally qualifying degree (eg bachelor, diploma) in an engineering degree program (minimum 180 ECTS) - Applicants must also be at the time of study entry in ungekündigter and professionally relevant employment Content of the course In the courses, great importance is placed on a continuous interaction between theoretical and scientific knowledge and practical application. This orientation is supported by accompanying scientific and technological enterprise projects during the first 4 semesters. Through elective modules, students can expand their individual skills either strong in the engineering expertise in automotive production technology or set priorities in the field of leadership and management in the automotive industry. 1st semester: Materials Science automotive materials, lightweight construction concepts, Industrial Production 1, Logistics and Supply Chain Management 1, Entrepreneurial activity / International Management and more. 2nd semester: Industrial Production 2 (assembly technology, robotics and transport equipment), digital technology in production, instruments for quality management, strategic management, and more. 3rd semester: Quality assurance and non-destructive testing, Industrial Production 3 Logistics and Supply Chain Management 2, International Business Communication and more. 4th semester: Industrial production 4, vehicle and mobility concepts, marketing and sales, performing employees and more. 5th semester: Development of... [-]

Master in Vehicle Engineering

KTH Royal Institute of Technology
Campus 2 years September 2017 Sweden Stockholm

Vehicle Engineering is a broad area of engineering science driven by an ever-increasing degree of mobility in the world. Transport, however, must face the challenge of minimising its environmental impact, requiring new, innovative solutions [+]

Best Part time Masters in Automotive Engineering 2017. Vehicle Engineering is a broad area of engineering science driven by an ever-increasing degree of mobility in the world. Transport, however, must face the challenge of minimising its environmental impact, requiring new, innovative solutions and capable engineers. This is a field that will continually demand specialists in order to make the transition to sustainable road and rail transport in the future. Programme outline The programme includes two specializations; Road vehicles and Rail vehicles. The Road vehicle specialization includes all road vehicles with a main focus on cars, trucks and buses. In the Rail vehicle specialization, the system aspect is very important, as the different parts of a railway system – vehicle, track, electrification and signalling – all strongly influence each other. The Vehicle Engineering Programme is taught in English and is based on lectures, assignments, simulations and experiments. Degree project To finalize your studies you perform an independent thesis work during a five month period. This can either be performed at a university or, more commonly, at a company. The student is encouraged to actively search for a suitable thesis project in industry, and KTH will provide assistance and suitable points of contact. Career prospects The programme provides an excellent basis for pursuing a career in the global vehicle industry, at consulting companies as well as at universities. The co-operation between the Swedish vehicle industry and the department of Vehicle and Aeronautical Engineering is very close, and there are several major ongoing... [-]