Master of Science in Technology Studies in Estonia

Compare MSc Programs in Technology Studies in Estonia 2018

Technology Studies

The MSc, or Master of Science, is a popular Master’s degree designation. Internationally recognized, the MSc is typically awarded after about five to six years of rigorous study in what is usually a science-based field.

Although technology may seem like a contemporary development, humans have been using technology since they began converting natural resources into tools. For example, the understanding of fire and its use in prehistoric cooking could be considered a facet of technology.

Estonia is among other things known for its forests (they make up almost half of the territory) and for being the only country in Europe with almost total 4G network coverage. Estonia provides high-level and internationally recognized education, and many universities in the country offer degree programs in English.

Top MSc Degrees in Technology Studies in Estonia 2018

Read More

Master in Computer Science

University of Tartu
Campus Full time 4 semesters September 2018 Estonia Tartu

The international Master’s programme in Computer Science prepares students for becoming leading specialists in public and private organisations and for further studies on the PhD level in Computer Science. [+]

The international Master’s programme in Computer Science prepares students for becoming leading specialists in public and private organisations and for further studies at the PhD level in Computer Science.

After passing the curriculum the student has acquired the core knowledge in the field of computer science and can use it to analyse and resolve practical problems.

The curriculum starts with a core module where students acquire basic skills in computer science (24 ECTS). You can choose one of the five specialisation modules (24 ECTS). In addition, the curriculum has a Master’s seminar module (12 ECTS), the electives module (12 ECTS), the practice module (12 ECTS). You can take 6 ECTS of optional courses from any of University’s subject areas. In the end of your studies, you have to submit a Master’s thesis (30 ECTS).... [-]


Master in Software Engineering

University of Tartu
Campus Full time 2 years September 2018 Estonia Tartu

MSc in Software Engineering imparts general software engineering skills and specialized skills in enterprise systems and embedded real-time systems. [+]

Software Engineering is a 2-year Master’s program that aims at providing students with advanced software engineering and management skills, as well as specialized skills in two major application domains: enterprise systems and embedded real-time systems. It is jointly delivered by the University of Tartu and Tallinn University of Technology. Upon graduation, students will receive a diploma from both universities.

The program will provide specialized knowledge and professional skills needed in a career path leading to high-end technical roles (e.g. software analyst, architect or research engineer) or managerial roles (e.g. project/team leader or technology officer). Graduates from the program have the skills to join the highly dynamic software industry in the Baltics, Northern, and Eastern Europe.... [-]


Master in Robotics and Computer Engineering

University of Tartu
Campus Full time 2 years September 2018 Estonia Tartu

The programme trains highly qualified roboticists, computer and space engineers. [+]

Master’s programme in Robotics and Computer Engineering trains highly qualified roboticists, computer and space engineers. The programme provides broad knowledge in the field of robotics, computer engineering or space technology. Graduates can work in enterprises or research and development centers connected to their field of study.

Why study Robotics and Computer Engineering? The University of Tartu belongs to the TOP 1.2% of the world's best universities. Studies are conducted in collaboration with research groups: students have an opportunity to build their own satellite! Student satellite EstCube-2 will be launched in 2018 while the first one, EstCube-1, launched in 2013, made Estonia the 41st space nation. Practical approach: students can work for a semester for a company or research group in their chosen field. Students can also replace a study module with a semester abroad either studying at another university or working for a research company. Students can also take management and economy courses to be able to start their own business. Modern buildings and laboratories: study building Physicum was opened in 2014 and its 13,000 square meters provides contemporary facilities for research in physics, materials science and nanotechnology. Students obtain knowledge of both hardware and software. Great scholarship opportunities: most students receive a tuition-waiver scholarship, monthly stipends also available Graduates are ready to work in the industry as well as in the field of research, development, and innovation. [-]

MSc in Public Sector Innovation and e-Governance

Tallinn University of Technology
Campus Full time August 2018 Estonia Tallinn

eGovernance and the digitalization of the public sector are most likely one of the most important reform trends for the future public sector. That’s why the public sector of the future needs experts who combine knowledge in public administration and public management on the one hand, and information systems and eGovernance on the other hand. The Erasmus Mundus Master of Science in Public Sector Innovation and eGovernance is a new and unique programme delivering those experts. [+]

eGovernance and the digitalization of the public sector are most likely one of the most important reform trends for the future public sector. That’s why the public sector of the future needs experts who combine knowledge in public administration and public management on the one hand, and information systems and eGovernance on the other hand. The Erasmus Mundus Master of Science in Public Sector Innovation and eGovernance is a new and unique programme delivering those experts.

WHY CHOOSE PIONEER? Do you want to specialize and advance your knowledge in public sector innovation? Are you interested in the actual and future challenges of the public sector? Do you want to be an expert in eGovernance and the digitalization of the public sector? Would you like to gain insight and competencies contributing to innovations to tackle the challenges public administrations are facing? Do you want to study at different established European Universities? ... [-]

MSc in Communicative Electronics

Tallinn University of Technology
Campus Full time 2 years August 2018 Estonia Tallinn

This programme aims to provide students with knowledge and skills in the key aspects of communication, semiconductor, medical and embedded electronics. [+]

Degree awarded: Master of Science in Engineering (MSc) Workload: 120 ECTS Language of instruction: English Duration: 2 years Pre-Requisites: Bachelor’s degree or equivalent in electronic, communicative, electrical or computer engineering, computer science in hardware, applied physics, biomedical engineering or mechatronics. Tuition fees and scholarships: 1 ECTS = 100 EUR. Nominal study load per 1 year = 60 ECTS/€6000, 15 tuition fee waiver scholarships available that guarantee free studies. Detailed information about the scholarship is available here Number of places available: 20

This programme aims to provide students with knowledge and skills in the key aspects of communication, semiconductor, medical and embedded electronics. Students can specialise in either communications electronics (embedded systems, networking, etc.) or cognitive electronics (sensors, sensor networks, medical diagnostics, measurement systems). The programme is supported by the ELIKO Competence Centre and the CEBE Centre of Excellence.... [-]


MSc in Software Engineering

Tallinn University of Technology
Campus Full time 2 years August 2018 Estonia Tallinn

The International Master’s Program in Software Engineering imparts general software engineering and management skills, as well as specialized skills in two major software application domains: enterprise systems and embedded real-time systems. [+]

The International Master’s Program in Software Engineering imparts general software engineering and management skills, as well as specialized skills in two major software application domains: enterprise systems and embedded real-time systems. The program is delivered jointly by Estonia’s two largest universities: University of Tartu and Tallinn University of Technology. Students graduating from this program obtain degrees from both universities.

The Master’s program starts with a core module where you will acquire general software engineering skills, covering both technical aspects (systems modeling and programming) but also management skills. You will then choose one of two specialization modules: enterprise software (at University of Tartu) or embedded & real-time software (at Tallinn University of Technology). A range of elective and free-choice courses will allow you to further specialize or to broaden your horizons.... [-]


MSc in Computer and Systems Engineering

Tallinn University of Technology
Campus Full time 2 years August 2018 Estonia Tallinn

The Master’s programme focuses on designing and using complex modern computer systems. As part of the programme, students cover such subjects as innovation and entrepreneurship, hardware systems design and modeling, computer architecture and programming, software project management and databases, to name but a few. [+]

Degree awarded: Master of Science in Engineering (MSc) Workload: 120 ECTS Language of instruction: English Nominal study period: 2 years Pre-Requisites: Bachelor's degree or equivalent related to engineering. In practice, it is expected that you know how to program (preferably in C) and are familiar with the basics of discrete mathematics, higher mathematics (differential equations), electronics and control theory. Tuition fees and scholarships: 1 ECTS = 100 EUR. Nominal study load per 1 year = 60 ECTS/€6000, 25 tuition fee waiver scholarships available that guarantee free studies. Detailed information about the scholarship is available here Number of places available: 30

The Master’s programme focuses on designing and using complex modern computer systems. As part of the programme, students cover such subjects as innovation and entrepreneurship, hardware systems design and modeling, computer architecture and programming, software project management and databases, to name but a few.... [-]


MSc in e-Governance Technologies and Services

Tallinn University of Technology
Campus Full time 2 years August 2018 Estonia Tallinn

The Master’s program in e-Governance Technologies and Services is giving students broad knowledge about the makings of a modern state – the transition into e-governance, its management, and development. Studies include a wider overview of administrative and legal aspects of e-governance. [+]

Degree awarded: Master of Science in Engineering (MSc) Workload: 120 ECTS Language of instruction: English Duration: 2 years Pre-Requisites: Bachelor’s degree or equivalent in Economics, Information Technology, Public Management, Law or in another related study field. It is an advantage to have work experience in the public or private sector related to e-governance. Tuition fees and scholarships: 1 ECTS = 100 EUR. Nominal study load per 1 year = 60 ECTS/€6000, 22 tuition fee waiver scholarships available that guarantee free studies. Number of places available: 25

Estonia’s e-government and the country’s other innovative e-solutions have grown into one of Europe’s success stories of the last decade. Tallinn Tech has taken a leap into the future of e-Governance education. Largely focusing on IT solutions at a government level, its interoperability between different faculties in the University is giving fundamental background also in other aspects (law, public management, and economics) of government. The program is especially important due to the reason that it is unique in Estonia and in Europe and the demand for the specialist with broad knowledge on e-governance is increasing tremendously.... [-]


MSc in Technology of Wood, Plastics and Textiles

Tallinn University of Technology
Campus Full time 2 years August 2018 Estonia Tallinn

The Technology of Wood, Plastics and Textiles international degree programme provides specialisation either in woodwork or plastic technology. Teaching is organised into modules combining lectures, seminars and laboratory work in the recently renovated laboratory of Polymer Physics and Technology, which is equipped with state-of-the-art devices. [+]

Degree awarded: Master of Science in Engineering (MSc) Workload: 120 ECTS Language of instruction: English Duration: 2 years Pre-Requisites: Bachelor’s degree or equivalent in natural sciences or technical fields Tuition fees and scholarships: 1 ECTS = 55 EUR. Nominal study load per 1 year = 60 ECTS/€3300, 10 tuition fee waiver scholarships available that guarantee free studies. Number of places available: 15

The Technology of Wood, Plastics and Textiles international degree programme provides specialisation either in woodwork or plastic technology. Teaching is organised into modules combining lectures, seminars and laboratory work in the recently renovated laboratory of Polymer Physics and Technology, which is equipped with state-of-the-art devices. The programme also emphasises the basic practical knowledge of CAD-engineering programmes and CAM-manufacturing technologies as they are extremely important in every industrial sector all over the world. The curriculum gives students the unique opportunity to implement their individual research projects in collaboration with various companies.... [-]


MSc in Cyber Security

Tallinn University of Technology
Campus Full time 2 years August 2018 Estonia Tallinn

The international Master’s program in Cyber Security aims to provide students with skills in all aspects of the security of information systems. It gives students a unique chance to study under high-level cyber security practitioners from Estonian banks, telecoms, CERT and the NATO Cooperative Cyber Defence Centre of Excellence. [+]

Degree awarded: Master of Science in Engineering (MSc). Workload: 120 ECTS. Language of instruction: English. Duration: 2 years. Pre-Requisites: Bachelor´s degree in IT or a related field (degree in other field is accepted only if the candidate has either previous work experience or in-service training in IT). Tuition fees and scholarships: 1 ECTS = 100 EUR. Nominal study load per 1 year = 60 ECTS/€6000, 30 tuition fee waiver scholarships available that guarantee free studies. Number of places available: 40.

The international Master's program with three main specialties - Cyber Security, Digital Forensics, and Cryptography - provides students with core skills in wide aspects of the security of information systems and specialized skills in the chosen specialization. Students get a unique chance to study under high-level cybersecurity practitioners from Estonian banks, telecoms, law enforcement, CERT and the NATO Cooperative Cyber Defence Centre of Excellence.... [-]