Part time MSc Degree in Mechanical Engineering

View all Part time MSc Programs in Mechanical Engineering 2018

Mechanical Engineering

The MSc, or Master of Science, is a popular Master’s degree designation. Internationally recognized, the MSc is typically awarded after about five to six years of rigorous study in what is usually a science-based field.

Mechanical engineering is a diverse engineering discipline, as it is the knowledge that is necessary to take a product from idea to the marketplace. The skills necessary to accomplish this include the ability to design for functionality, aesthetics and the environment the product will be used in.

Request Information Part time Master of Science Programs in Mechanical Engineering 2018

Read More

MS in Aviation and Aerospace Management Online

Purdue Polytechnic Institute – Center for Professional Studies
Online Part time 11 months Open Enrollment USA West Lafayette

If you’re looking to advance within the challenging, specialized world of aviation, Purdue’s MS in Aviation and Aerospace Management will help you develop essential management and leadership skills. [+]

If you’re looking to advance within the challenging, specialized world of aviation, Purdue’s MS in Aviation and Aerospace Management will help you develop essential management and leadership skills.

Taught by professors with distinguished educational backgrounds and work experience in civilian aviation, military aviation and governmental roles, our industry-specific courses will prepare you for numerous aviation management roles.

Economic forecasts suggest that a steady increase in travelling passenger and air cargo requirements will fuel a dramatic expansion of the aviation industry, and require a complete restructuring of the existing air transportation system architecture. This industry growth is generating a wide range of leadership opportunities in the aviation industry for individuals who possess aviation and aerospace management skills such as operational analysis, safety systems development, project management, systems integration, environmental sustainability, and related interdisciplinary skills.... [-]


Master in Mechanical Engineering (M.S and M.E.)

Inter American University of Puerto Rico
Campus 2 years August 2018 Puerto Rico Bayamón

The Department of Mechanical Engineering offers two modalities of master degrees: Master of Science (M.S.) in Mechanical Engineering and Master of Engineering (M.E.) in Mechanical Engineering. In each modality, two specializations are offered: Aerospace and Energy. [+]

The Department of Mechanical Engineering offers two modalities of master degrees: Master of Science (M.S.) in Mechanical Engineering and Master of Engineering (M.E.) in Mechanical Engineering. In each modality, two specializations are offered: Aerospace and Energy.

These programs are designed to prepare students with the skills and attitudes necessary to perform as efficient professionals in the aerospace and energy specializations. The Energy specialization students are prepared for the study of fossil and renewable energies. In the Aerospace specialization; students are offered the knowledge necessary to perform successfully in the aerospace industry.

[-]

MSc in Mechanical Engineering

Magdeburg-Stendal University of Applied Sciences
Campus 3 semesters April 2019 Germany Magdeburg

The Master's programme aims to equip students with extensive fundamental knowledge which puts graduates in a position to apply this knowledge in practice, research or teaching and to expand upon it constantly. [+]

No restricted admission. Start of studies The programme begins each summer semester. Applicants with foreign certificates please apply till 31 January via uni-assist e.V.. Programme objectives

The Master's programme aims to equip students with extensive fundamental knowledge which puts graduates in a position to apply this knowledge in practice, research or teaching and to expand upon it constantly. It revolves around the teaching of subject-specific and social competences, skills and methods of working scientifically and, in particular, equipping students for leadership tasks. Due to rapidly developing knowledge in mechanical engineering, part of this is also the acquisition of extended expertise for diverse fields of work and specialisation. On the Master’s programme, this relates to activities focused on the fields of... [-]


MSc in Mechanical Engineering

Tufts University - School of Engineering
Campus Part time August 2019 USA Medford

The goal of the Master of Science (MS) degree program is to provide students with an opportunity to strengthen their technical backgrounds for pursuing successful professional careers in engineering research, development and management. [+]

The goal of the Master of Science (MS) degree program is to provide students with an opportunity to strengthen their technical backgrounds for pursuing successful professional careers in engineering research, development, and management. Applicants are admitted to this program on the basis of their educational qualifications. A key admission requirement is strong academic background in mechanical engineering or a related technical discipline. The Department also requires all applicants to submit their recent General Record Examination (GRE) scores.

Application Requirements Application Fee Resume/CV Personal Statement GRE not required for current Tufts undergraduates applying to the M.S. degree program GRE scores may be waived for part-time students with five years of industry experience who are U.S. citizens or permanent residents. Official TOEFL or IELTS, if applicable Transcripts Three letters of Recommendation [-]

MSc Mechanical Engineering and Design

Mediterranean College, Athens
Campus 1 - 2 years October 2018 Greece Athens

The MSc Mechanical Engineering and Design is a unique and particularly contemporary course of study, that encompasses knowledge from all areas related to the Mechanical Engineer profession and includes modules that teach the latest industry developments and their application on real Engineering problems. Its aim is to equip students with the necessary technical skills and theoretical background for the development of Mechanical Engineering projects in the field of Construction or Energy. [+]

25% Tuittion fee discount if paid in full by the end of April 2018

A course designed in consultation with leading companies so as to address the local and international industry needs. Includes particularly innovative and distinct modules from all areas of the Mechanical Engineering science (Construction, Energy, Production Management). Academic staff is active professionals and researchers, who convey to students contemporary developments in their field. Students link academic knowledge with real industrial applications, by engaging with live projects as part of their studies. Students produce individual research that can lead to publications in international conferences and journals. ... [-]

Master of Mechatronics Systems

Vilnius Gediminas Technical University
Campus 2 years September 2018 Lithuania Vilnius

The purpose of this program is to prepare high qualification graduates with deep comprehensive and up-to-date knowledge in mechatronics including mechanical engineering, information technologies, mechatronic systems and mathematical modelling; to prepare specialists with analytical, modelling and projection skills in manufacturing and process management of mechatronic systems with their parameters optimization as well as the specialists having mechatronic problem solving skills applicable to research, etc. [+]

What is the purpose of this study program?

To prepare high qualification graduates with deep comprehensive and up-to-date knowledge in mechatronics including mechanical engineering, information technologies, mechatronic systems and mathematical modeling. To prepare specialists with analytical, modeling and projection skills in manufacturing and process management of mechatronic systems with their parameters optimization as well as the specialists having mechatronic problem-solving skills applicable to research. To provide students with the knowledge which is required to accomplish not only the tasks of projecting, researching and performing technologic-manufacturing jobs but also needful for executing the expert-consultative or supervisory functions in the mechatronic companies and organizations.... [-]


Mechanical Engineering

International Accelerator
Campus Part time September 2018 USA Boston

The Master of Science (MS) in Mechanical Engineering program is geared toward providing students and practicing engineers with advanced studies in several areas of specialization. The degree is available in either a thesis or a non-thesis program. [+]

Mechanical Engineering

How would you feel about your senior project being showcased at the Smithsonian National Air and Space Museum in Washington? Team “FIUAV” brought their autonomous plane with high-definition cameras and full onboard computer to the Museum in April 2012.

The result of two semesters of work from four Mechanical Engineering seniors, this system also went to the AUVSI competition in Madrid.

Beyond this stellar project, the creativity and research of the Mechanical Engineering profession impact health, exploration, manufacturing, and technology. Mechanical engineering is critical to space exploration, environmental control, defense, transportation, and bioengineering.... [-]


MSc in Mechanical Engineering

Manchester Metropolitan University
Campus Part time 1 - 2 years September 2018 United Kingdom Manchester

This course spans advanced mechanical sciences theory, simulation and practice. Using industry standard software you will develop complex models to simulate topics such as multibody dynamic systems; thermo-fluid systems and advanced stress and structure simulations. Failure mechanisms in real-world systems and components will be investigated through fatigue analysis; you will also examine multi-body dynamic systems and turbulent fluid dynamic motion. Your chosen specialist Masters project makes up one-third of the overall course [+]

Overview

This course spans advanced mechanical sciences theory, simulation and practice. Using industry standard software, you will develop complex models to simulate topics such as multibody dynamic systems; thermo-fluid systems and advanced stress and structure simulations. Failure mechanisms in real-world systems and components will be investigated through fatigue analysis; you will also examine multi-body dynamic systems and turbulent fluid dynamic motion. Your chosen specialist Masters project makes up one-third of the overall course.

You will also learn from industry case studies. All units provide real-world engineering problems, case studies and practical techniques using state-of-the-art hardware and the latest, industry-standard software for design, experimentation and evaluation. The units typically have a good balance of practical and theoretical work. Much of the practical work is computer based.... [-]


Master of Mechanical Engineering (Leuven)

KU Leuven: Faculty of Engineering Science
Campus Part time 2 years September 2018 Belgium Leuven

Mechanical engineering is a very broad field of study in the engineering sciences. It integrates almost all disciplines of technology. Any device or product that is used in modern, everyday life is the result of an ongoing synergy between different basic techniques. In short, all products in modern society arose from the merger of different technical disciplines. Mechanical engineering is the preferred integrator specialized for realizing this. [+]

Mechanical engineering is a very broad field of study in the engineering sciences. It integrates almost all disciplines of technology. Any device or product that is used in modern, everyday life is the result of an ongoing synergy between different basic techniques. In short, all products in modern society arose from the merger of different technical disciplines. Mechanical engineering is the preferred integrator specialized for realizing this.

What's the Master of Mechanical Engineering all about?

The Master of Science in Engineering: Mechanical Engineering is a general training program integrating all disciplines of basic sciences, engineering, and technology. An essential element of the mechanical engineering curriculum at KU Leuven is the direct training of each student in a real-life industrial or research setting. Following up on the design assignment in the Bachelor's program, the Master's program brings the student in close contact with the industrial reality.... [-]


Master in Automotive Mechatronics and Management

University of Applied Sciences Upper Austria
Campus 4 semesters October 2018 Austria Wels

Rapid developments in vehicle engineering have led to a merging of the fields of Mechanics, Electronics and Informatics. One cause of this is that vehicles meet customer demands by the optimal interplay of various mechanical and electronic components. Many functions in the areas of comfort, safety and efficiency are only made possible by mechatronic systems. [+]

Master in Automotive Mechatronics and Management

Rapid developments in vehicle engineering have led to a merging of the fields of Mechanics, Electronics and Informatics. One cause of this is that vehicles meet customer demands by the optimal interplay of various mechanical and electronic components. Many functions in the areas of comfort, safety and efficiency are only made possible by mechatronic systems. In this context, specific expertise in the mechatronic disciplines, combined with social- and business economics competences, will be central requirements for future employees and managers in the automotive industry. Precisely these requirements are the focus of the new Master’s degree Automotive Mechatronics and Management.... [-]


Master of Science in Mechanical Engineering

California Polytechnic State University, San Luis Obispo
Campus September 2018 USA San Luis Obispo

The master’s program in Mechanical Engineering at Cal Poly is designed to prepare you to work in research or product design. It provides a system level foundation of knowledge and students can select an area of emphasis based on their specific area of technological interest. [+]

Master the Skills of Product Design

Welcome to Graduate Education at California Polytechnic State University in San Luis Obispo, California

The master’s program in Mechanical Engineering at Cal Poly is designed to prepare you to work in research or product design. It provides a system level foundation of knowledge and students can select an area of emphasis based on their specific area of technological interest. Degree candidates can select a thesis option or a non-thesis option. Graduates will develop competency in advanced mathematics, formulate system level solutions to problems, and develop effective communication and project management skills. Career opportunities can be found in automotive, computers, electronics, aviation, defense, HVAC, petroleum, food production, and many other fields.... [-]


MSc in Offshore Engineering

Universiti Teknologi PETRONAS
Campus Part time 4 - 7 semesters September 2018 Malaysia Ipoh

The pedagogical goal of the MSc Offshore Engineering program is to educate students to be able to take a leadership role in superior technical knowledge and application required in the offshore industry. [+]

The offshore industry is a relatively recent Industry that has rapidly expanded during the last 60 years. Challenges in the industry arise such as has never been encountered before, particularly in offshore engineering. These challenges can only be synthesized and solved by upgrading and enhancing the knowledge related to offshore engineering.

The oil and gas industry plays a significant role in Malaysia’s economy. The nation largely derives these resources from offshore reserves. It is predicted that there will be a shortage of talent in Malaysia in the oil and gas industry. This complexity is due to the large segments of workforce approaching retirement and the lack of skilled graduates from Malaysian universities. Malaysian universities have limited exposure in offshore engineering, as the focus is on general engineering in major disciplines (e.g. Civil, Mechanical, Electrical Engineering). Exposure is only gained through on the job training, requiring companies to invest a significant amount of time and money. In order to fill in the skill gap and lack of talent, it is necessary to develop graduates who are trained and versed in various offshore engineering areas.... [-]


MSc in Management and Engineering in Computer Aided Mechanical Engineering (MME-CAME)

Maastricht School of Management
Campus 2 years October 2018 Netherlands Maastricht Germany Stolberg (Rhineland) + 1 more

The M.Sc. in Management and Engineering in Computer Aided Mechanical Engineering is a two-year full-time industrial engineering program that provides you, on the one hand, with in-depth knowledge and understanding of finite element methods, numerical methods, simulation, mechanics, software engineering and production management, and on the other hand with business, management, leadership and entrepreneurial skills. [+]

Do you want to work at the interface of technology, business, and entrepreneurship?

As graduates with the expertise to understand both the art of management and complex engineering processes are highly sought after in today’s industrial world, this master course caters to that demand. It will give you the choice and the flexibility to work in two increasingly interlinked fields of today’s professional activity: at the interface of technology and business.

Industrial engineers are employed in a wide-range of fields: in traditional manufacturing companies or in consulting firms, in financial institutions or in the food industry, in logistics companies or healthcare establishments. With the benefit of a qualification in management, your will have the added choice and flexibility of working in even more different sectors and professional capacities.... [-]


Master of Science in Mechanical Engineering (MS) - Online

Kennesaw State University
Online Part time September 2018 USA Kennesaw

Applicants to the Master of Science Program with a major in Mechanical Engineering must submit the following to the Admissions Office no later than the published deadline date for the semester in which the applicant plans to enroll. [+]

Master of Science in Mechanical Engineering

Applicants to the Master of Science Program with a major in Mechanical Engineering must submit the following to the Admissions Office no later than the published deadline date for the semester in which the applicant plans to enroll:

Official transcript to be sent from each college or university attended. An official copy of scores from the “General Test” of the Graduate Record Examination (GRE) if applicable, or have attained an aggregate undergraduate GPA of 3.5 or have a minimum of 4 years’ relevant work experience or have successfully completed the Fundamentals of Engineering exam. At least two (2) recommendations by former or current supervisors, professors, or professional colleagues, A 1 – 2-page Statement of Purpose describing your career and educational goals, and A current resume. International students ... [-]

M.Sc. Mechatronics - Photonics Engineering

Warsaw University of Technology
Campus 18 months October 2018 Poland Warsaw

MECHThe program of the second cycle full-time studies in the field of Photonics Engineering specialization is developed as a high-quality educational offer in the area of modern optics, photonics and optomechatronics. [+]

Faculty of Mechatronics

Faculty of Mechatronics offers the following programmes conducted in English:

Master of Science in Engineering

1.5-year graduate programme in the area of:

Photonics Engineering M.SC. Masters Studies - Mechatronics (Photonics)

The programme of the second cycle full-time studies in the field of Photonics Engineering specialisation is developed as a high-quality educational offer in the area of modern optics, photonics and optomechatronics. After graduation students will pursue their professional career in the diverse areas of photonics, especially: mathematical and numerical modelling, the design of optomechanical systems, image processing and recognition, optical methods of testing, diffraction optics and micro-optics. The profile of a graduate corresponds with the challenges of the 21st century. The unique knowledge, delivered during courses, enables the graduate to pursue a promising career as engineers and researchers in modern fields of science, technology and industry, which are dynamically developing.... [-]