Master's Degree in Mechanical Engineering in Enugu in Nigeria

View Masters Programs in Mechanical Engineering 2017 in Enugu in Nigeria

Mechanical Engineering

A masters refers to the completion of a graduate study program that prepares students to further their knowledge of a specific subject or advance their careers. The majority of masters are granted by state or public universities.

Mechanical engineering is the manufacturing of products that move. It encompasses the entire production process, from drafting an idea for an item, to understanding the mechanics necessary to make the item work, to the production of the completed item, to incorporating that item into larger systems.

To gain admission into the Nigerian universities (both public and private universities are in every state of the federation including the FCT), a prospective student has to sit for and successfully pass the UME(Universities Matriculation Examination) which is administered by JAMB (Joint Admission and Matriculation Board). Also individual universities regularly screen prospective candidates to make sure they are up to par for university level work in Nigeria.

Located at the southeastern Nigeria, Enugu is an educationally stable city of the Enugu State. Main tertiary Institute includes Enugu State University of Science and Technology, The University of Nigeria and The Institute of Management and Technology. Other notable institutions involve Saviour Institute of Science and Technology.

Request Information Master's Degrees in Mechanical Engineering in Enugu in Nigeria 2017

Read More

Faculty of Engineering

Enugu State University of Science and Technology - ESUT
Campus Full time March 2017 Nigeria Enugu

The Department of Civil Engineering offers graduate courses leading to the award of Postgraduate Diploma (PGD) in Civil Engineering; Masters of Engineering (M.Eng) in Structures and Geotechnical Engineering; and Doctor of Philosophy (Ph.D) in Structures and Geotechnical Engineering degrees. [+]

Masters in Mechanical Engineering in Enugu in Nigeria. Faculty of Engineering Agricultural & Bioresource Engineering Admission Requirement: Applicants will normally be accepted under the general regulation of the school of Post-graduate studies. 1.Postgraduate Diploma: Applicant should posses HND in Agric Engineering or related field with a minimum CGPA of 2.5 on 5 point scale and 2.0 on 4 point scale, a minimum of pass degree in agricultural Engineering, agricultural mechanization and other engineering disciplines in ESUT or from any recognized university. 2.Masters Degree: Applicant for the M.Eng degree must have normally received at least a good second class honour degree in Agricultural Engineering at ESUT or any recognized University. 3.Doctorate Degree: The admission requirement for the Ph.D program is a good M.Eng or M.Sc degree in Agricultural Engineering. Programme Requirement 1.Postgraduate Diploma: The programme is by course work and a research project. The course work may include undergraduate course for students who are deficient. Every candidate is required to register full time and shall pass all the courses required for the programme as presented in the list of PGD courses below. 2.Masters Degree: The programme is done by course work of a minimum of 27 credit hours in addition to research work to be presented in a project report. Candidates may register for full-time or part-time study. 3.Doctorate Degree: The programme is done by comprehensive research work to be embodied in a written thesis. The research work is supplemented with course-work of a minimum of 12 credit hours. The result of the research findings is to be reported in thesis to be written and presented by the Ph.D student. Programme Duration 1.Post-Gradute Diploma: Programme duration for PGD is four (4) semesters and the curriculum in each programme is outlined into 1st, 2nd, 3rd, and 4th semester. 2.Masters Degree: The M. Eng. degree programme shall last a minimum of 12 continuous calendar months for full-time and 18 months for part-time. 3.Doctorate Degree: The Minimum duration for the Ph.D degree is 3 calendar years for regular programmes and 5 year for part-time students. Chemical Engineering Admission Requirements Graduates of Enugu State University of Science and Technology or former ASUTECH or graduates from other approved Universities acceptable to Senate who hold a minimum of a pass degree in Chemical Engineering or a minimum of second class honour degree in a related field, are eligible to apply. Candidates who possess HND or its equivalent with a minimum of upper credit pass in Chemical Engineering are also eligible to apply. Candidates who possess HND with lower credit with five (5) years experience can also apply. All candidates must have five credit passes including English, Mathematics, Physics and Chemistry at O' level. Mode of Study The programme shall be by course work with research project .The course work may include undergraduate courses for students who are deficient in them. There is provision for full-time and part-time study depending on vacancy. Every candidate is required to state clearly the required mode. Duration of PGD Programme Full-time: Minimum of four (4) Semesters and a maximum of six (6) Semesters Part-time: Minimum of six (6) Semesters and a maximum of eight (8) Semesters Examination and Assessment of the candidate's work There shall be no supplementary (or re-sit) Examination. A candidate who fails any course has only one chance to register and retake the course at the next opportunity when the course shall become available The level of performance in any PG examination will be assessed according to the following grading system. Civil Engineering Introduction The Department of Civil Engineering offers graduate courses leading to the award of Postgraduate Diploma (PGD) in Civil Engineering; Masters of Engineering (M.Eng) in Structures and Geotechnical Engineering; and Doctor of Philosophy (Ph.D) in Structures and Geotechnical Engineering degrees. Philosophy The postgraduate program in Civil Engineering is designed to meet the growing need for Civil Engineering professionals that have the scientific and practical competence to contribute to the infrastructural development of a fast growing and increasingly modernizing society. Nigeria cannot develop into a competitive modern society without the upgrading of her infrastructure, a major part of which are Civil Engineering structures. The need for specialists and professionals competent in advanced areas of Civil Engineering analysis and design is therefore very obvious in the emerging Nigerian society. The public and private sectors of the economy need an injection of such professionals and the Department is committed to producing them. Objectives and Scope of the programme The postgraduate program in Civil Engineering covers at present the following areas of specialization (for the M. Eng. and PhD programs that have areas of specialization) - Structural Engineering and Geotechnical Engineering. The program aims at training personnel in advanced and specialist fields within these areas of specialization. The program includes lectures, field trips and laboratory work on one hand, and guided research leading to the preparation of theses, reports and dissertations on particular topics within the student's area of specialization. Post Graduate Diploma in Engineering (PGD) Degree The Postgraduate Diploma in Engineering Program of the Department of Civil Engineering is geared towards meeting the Council for the Regulation of Engineering in Nigeria (COREN) minimum academic standard for postgraduate diploma in Civil Engineering. The program is planned to provide a bridge for HND holders in Civil Engineering (Engineering Technologists) who desire to obtain an equivalent Bachelor's degree; B. Eng. (Civil Engineering) graduates that had third class or lower grades that desire to correct their deficiencies and possibly be eligible for M.Eng. programs; and B.Sc. graduates in allied fields that desire to make up for an equivalent B.Eng. degree in Civil Engineering. The program has a two academic years (4 Semesters) duration. Admission Requirements All candidates must have five Credit passes including English language, Mathematics, Physics, Chemistry, and any other Science subject at O'level. 1.Post Graduate Diploma HND with minimum of Upper credit in Computer/Electronics Engineering or Computer Technology from a recognized Polytechnic B.Sc/B.Eng degree in Computer/Electronics Engineering with a minimum of third class degree from a recognized University. 2.Master's Degree Programmes M.Eng Programme:The entry requirement for the M.Eng Degree programme is at least a good second class degree with a minimum CGPA of 3.00 on a five point Scale in Computer/Electronics from a recognized degree awarding institution. Such a candidate is expected to have obtained the minimum University entry requirements. HND holders in Computer Engineering/ Electronics Engineering will be required to register for PGD in the first instance and on successful completion of that with good result, may proceed to the M.Eng degree programme. 3.Doctor of Philosophy (Ph.D) At least a completed Master's degree programme with a minimum CGPA of 3.50 on a five point scale in Computer/Electronics Engineering, from any recognized University. The full time PhD degree programme runs for 6 semesters (minimum), while the part time option runs for 8 semesters (minimum). PhD Software Engineering In addition to the above requirements, programming skill in at least one high-level programming language preferably C++, C# or JAVA and all M.Eng (software Engineering) course requirements apply. Philosophy To inculcate in the students the ideals and the significance of the engineering discipline in general and computer engineering in particular in national development with a view to providing the much needed quality manpower in computer engineering, instrumentation and control, information and communication technology, computer utilization, including computer maintenance and management. Aims and Objectives The principal objective of the Department of Computer Engineering is the training of engineers who are not only capable of meeting the challenges in the Nigerian Computer Industry but also capable of being job-creators instead of job seekers. It therefore emphasizes a sound knowledge of engineering principles coupled with high practical and innovative ability to shoulder a broad spectrum of engineering responsibilities. To this end the courses offered in the department are designed to provide the educational training and skills necessary for understanding, planning, designing, operating, and maintaining the various processes and operations involved in the modern computer industry. In addition to the teaching programmes, the department encourages research and development work by the students and the academic staff. This area is taken very seriously by this department in view of our present economic problems and lack of maintenance of numerous and sophisticated machines from overseas dumped into this country. Students are therefore encouraged to develop indigenous computers and computer based solutions which are appropriate for our specific needs and environment. They are likewise encouraged to design, assemble and construct the equipment needed for their research projects. Emphasis is placed on the design and implementation of microprocessor-based and micro computer-based control systems, in order to afford students the opportunity to work with units, which approximate those used in the industry. To keep up with advances in this discipline and ensure that these objectives are met, the department constantly updates its programme. This ensures that graduates of the department are properly positioned to meet demands of modern-day cutting-edge computer technology. Electrical & Electronics Engineering Admission Requirements The criteria for admission into the Postgraduate Engineering programmes are as follows: Basic Requirements All candidates must have five Credit passes including English, Mathematics, Physics and Chemistry O'Level. 1.Postgraduate Diploma, PGD A graduate from a recognized University with at least a pass degree or a holder of a minimum of Upper Credits in the Higher National Diploma HND, from a recognized institution. Holders of the HND at Lower Units with a minimum of give (5) years post-qualification relevant experience maybe considered. 2.Master of Engineering (M.Eng) A candidate with a first degree in relevant Engineering discipline form a recognized University with minimum of a Second Class Lower Division may be admitted provided the University Matriculation requirement is satisfied. A candidate with an Upper Credit Pass in the Postgraduate Diploma (PGD), in a relevant Engineering discipline, from a recognized University may also be admitted to a Masters Degree Programme provided the University Matriculation requirements are satisfied. 3.Master of Philosophy (M.Phil) A candidate with a Master of Engineering Degree with a minimum CGPA of 3.3 on a 5 point scale from a recognized University may be admitted. 4.Doctor of Philosophy (PhD) Degree A candidate who holds a Masters Degree, with a minimum of CGPA of 3.5 on a 5-point scale or average of 60%, which includes coursework and research thesis in a relevant Engineering discipline, from a recognized University may be admitted provided the University Matriculation requirements are satisfied. Mandatory Duration of Programme A uniform duration for the programme for all Universities, making allowance for minor individual university variation shall be adopted as follows: 1. Postgraduate Diploma Programme Full-time: Minimum of four (4) semesters and a maximum of six (6) semesters. Part-time: Minimum of six (6) semesters and a maximum of eight (8) semesters. 2.Masters Degree Programme Full-time: A minimum of three (3) semesters and a maximum of six (6) semesters. Part-time: A minimum of four (4) semesters and a maximum of eight (8) semesters. 3.Doctorate Degree Programme Full-time: A minimum of six (6) semesters and a maximum of twelve (12) semesters. Part-time: A minimum of eight (8) semesters and a maximum of sixteen (16) semesters. Mechanical & Production Engineering Philosophy The founding father of the university conceived unique university that must be closely related to the larger society, its industry and above all serve all a catalyst in the technological advancement of the people. The emphasis in the programme is to develop and offer academic and professional programs leading to the award of pos graduate degree and diploma to person who attain the standard prescribed by the university and have in all other respects satisfied the conditions and requirement laid down or other wise approved by the university. Objectives The main objectives of postgraduate studies in the University system is to further develop the spirit of enquiry in the graduate students through training in research in an atmosphere of intellectual independence and individual creativity combined with a strong sense of team work. In pursuit of this objective, teachers and students constitute of single team in a well defined and purposeful endeavour of human development. Following closely to this objective is the fostering, through instruction of a deeper understanding of elementary concepts and an increasing ability to apply fundamental ideas to new problems in the graduate student. The student in the postgraduate school must realize quite early that his/her intellectual growth and sub sequent successes are directly related to the depth of his/her command of basic principles and his/her ability to apply those principles. It is true that graduate studies are usually associated with a high degree of specialization; nevertheless such specialization must be achieved in the context of extending mental horizons, producing new orientations, and developing a depth of understanding in the relevant disciplines. Within the context of the above general objectives, Postgraduate Studies must pursue two particular objectives which are both academic and practical in orientation. Thus, they must seek to: provide training in research for those whose future careers will lie in teaching and research at University level, and for those who many have to operate in research and development environments in the public or private sectors, e.g. in government, commercial and industrial concerns; and Provide both short and long-term training facilities aimed at improving and upgrading the existing and potential high level manpower needed for planning, implementing and reviewing national development plans as well as improved productivity and performance in the private sector. Registration Requirement and Procedure A candidate may register for full-time or a part-time programme as applicable. Members of the department, including teaching staff and research follows who posses the necessary qualifications may be admitted for part-time study only. Admission Requirements All applicants must satisfy that admission requirement of the school of postgraduate studies. Only the graduates of Enugu State University of Science and Technology or of any other approved University acceptable to senate who possess a minimum of a third class degree in Mechanical engineering or minimum of second class honours in related filed, are eligible to apply. Candidates who posses the H.N.D or its equivalent with a minimum of upper credit level pass in mechanical engineering are also eligible to apply. Mode of Study The academic programme will be by course work and a supervised project. The diploma programme may be pursued on full or part-time basis. Duration of the programme The programme duration for the PGD is four semesters and the Curriculum in the programme is outlined into first, second, third, and fourth semesters respectively. Metallurgical & Materials Engineering Admission Requirements The criteria for admission into the Postgraduate Programmes in Metallurgical & Materials Engineering are as follows: Basic Requirements: All candidates must have five Credit passes including English, Mathematics, Physics and Chemistry O' level. 1.Postgraduate Diploma PGD. A graduate from a recognized University with at least a pass degree or a holder of a minimum of upper Credits in the Higher National Diploma HND, from a recognized institution. Holders of the HND at lower Units with a minimum of five (5) years post-qualification relevant experience may be considered. 2.Masters Degree. A candidate with a first degree in a relevant Engineering discipline from a recognized University with minimum of a second class lower division may be admitted provided the University matriculation requirement is satisfied. A candidate with an upper credit pass in the Postgraduate Diploma (PGD) in a relevant Engineering discipline, from a recognized University may also be admitted to a Masters Degree Programme provided the University matriculation requirement is satisfied. 3.Doctor of Philosophy (Ph.D) Degree. A candidate who holds a Masters degree, with a minimum CGPA of 3.50 on a 5-point scale or an average of 60% which includes coursework and research thesis in a relevant Engineering discipline, from a recognized university may be admitted provided the university matriculation requirement is satisfied. Completion of programme. Each department shall specify all additional prerequisites for completion of the programme. Mandatory Duration of Programmes. A uniform duration for the programme for all universities, making allowance for minor individual university variation shall be adopted as follows: 1.Postgraduate Diploma Programme Full-time: Minimum of four(4) semester and a maximum of six (6) semesters. Part-time: Minimum of six (6) semesters and a maximum of eight semesters. 2.Masters Degree Programme Full-time: A minimum of three (3) semesters and a maximum of six (6) semesters Part-time: A minimum of four(4) semesters and a maximum of eight (8) semester. 3.Ph.D Programme Full-time: A minimum of six (6) semesters and a maximum of twelve 12 semesters. Part-time: A minimum of eight (8) semesters and a maximum of sixteen (16) semesters. [-]