Part time Master's Degree in Mechatronics in Europe

View Part time Masters Programs in Mechatronics in Europe 2017

Mechatronics

Master-level studies involve specialized study in a field of research or an area of professional practice. Earning a master’s degree demonstrates a higher level of mastery of the subject. Earning a master’s degree can take anywhere from a year to three or four years. Before you can graduate, you usually must write and defend a thesis, a long paper that is the culmination of your specialized research.

Education in mechatronics involves study and research in a wide variety of laboratories. Specialized laboratories for robotics, microprocessor systems, control systems, and sustainable energy are often utilized. CAD/CAM systems and multimedia computer equipment are also used in mechatronics education.

In all, there are over 4000 Higher Education Institutions in Europe offering a wide range of courses at Bachelor, Masters and Doctorate level. With more and more of these organizations offering English as the language of education for at least some of their degree programs, universities in Europe are now of higher quality than ever before. Universities in Europe offer a friendly welcome to foreign students and to give a course of knowledge that meets their profession needs in today’s global demand.

Contact Schools Best Part time Master's Programs in Mechatronics in Europe 2017

Read More

Integrated Master's in Mechanical Engineering

University of Minho - School of Engineering
Campus 5 years September 2017 Portugal Braga

The course is structured according to projects which allow the student to consolidate theoretical and technical knowledge and integrate the acquired knowledge into concrete objectives in order to develop necessary skills to a mechanical engineer. [+]

Top Part time Masters in Mechatronics in Europe. Academic degree: Bachelor (Bologna 1st cycle degree), Master's degree ECTS: 300 Duration: 5 curricular years Regime: Normal Place: Azurém Campus, Guimarães Main Scientific area: Mechanical Engineering INTEGRATED MASTER’S | 5 YEARS The course provides a multifaceted training combining basic sciences, of engineering and of specialty. Students get faced, throughout their training, with engineering problems of increasing complexity as part of a coherent path. There are more and more activities in areas of strong intervention that require a recognized professional and which the course includes: mechanical project in general; granting of permits; structural calculation; activities in the field of energy (gas, air conditioning or heating systems), among many others. The career opportunities cover a wide range of activities from manufacturing companies, services or R & D, including practice areas ranging from plastics, to textiles, electronics, automation and mechatronics, lying special emphasis on automotive, shipbuilding or aircraft, among others. Careers The employment options cover a wide range of activities, from transforming industry, to services or R&D, including plastics, textile, electronics, automation and mechatronics. A special emphasis is placed on the automobile, naval or aeronautical industry. [-]

Master in Applied Mechanics

Technical University of Ostrava
Campus 2 years September 2017 Czech Republic Ostrava

The main emphasis in graduate education in the field of Applied Mechanics is on the readiness and ability to develop, elaborate and make practical use of modern computational and experimental approaches to solve technical problems. [+]

Branch Profile Deeper knowledge of the core disciplines of mechanical engineering creates a broad basis for creative applications in engineering and other professional growth through various forms of lifelong learning. The main emphasis in graduate education in the field of Applied Mechanics is on the readiness and ability to develop, elaborate and make practical use of modern computational and experimental approaches to solve technical problems. Graduates will be able to perform static, kinematic and dynamic analysis of mechanisms and structures, to apply fracture mechanics in the assessment of limit states of components and structures, to assess the reliability and durability of machines and temperature loading, deal with technical tasks, flow dynamics and hydro-thermodynamic systems and heat and mass transfer. They will be able to exploit and further develop computer support in the design, planning and research activities for specific applications. Key Learning Outcomes KNOWLEDGE Graduates gain in-depth knowledge about the mechanics of solid bodies, strength and elasticity. In addition to the basic areas of mechanics covered in bachelor study, students deal with questions of fracture mechanics, plasticity, evaluation of the limiting states of parts and structures, examination of the reliability and operational life of machines, analyzing thermal loading, technical flow tasks, dynamics, hydro-mechanical and thermo-mechanical systems and the transfer of heat and mass. Graduates also understand the options, conditions and restrictions on the use of knowledge-related fields.   SKILLS In specific applications, graduates will be able to use and further develop computer aid design, structural and research and development activities. However, the main aim is focused on the preparation and ability to develop, elaborate and practically use computerized procedures in solving technical problems. A graduate can use expertise to independently identify and creatively solve theoretical or practical problems in the field, independently solve complex problems using selected theories, concepts and methods of the field and use some of the most advanced research approaches in the field in a manner allowing to obtain new original information. GENERAL COMPETENCIES Graduates will be able to independently and responsibly to decide on a new or changing context or radically changing environment, taking into account the wider social implications of decisions. By developing relationships and resources available they are able to define terms of reference for professional activities, coordinate them, and bear ultimate responsibility for their results. Graduates will be able to communicate clearly and persuasively both professionals and the wider public, their own professional opinions and use their professional knowledge, professional skills and general competence in at least one foreign language. In terms of teamwork, a student gets the ability to plan, promote and manage the use of theoretical knowledge, gaining additional industry expertise, skills and competencies of other team members.   Occupational Profiles of Graduates A deeper understanding of fundamental disciplines of mechanical engineering creates a broad basis for creative employment in engineering. The graduate will be able to perform static, kinematic and dynamic analysis of mechanisms to apply a knowledge of fracture mechanics in the evaluation of limit states of components and structures, to assess the reliability and durability of machines, thermal stresses and solve technical tasks of flow dynamics in hydro-mechanical and thermodynamical systems. In specific applications he/she will be able to utilize and further develop computer support in the design, especially by means of FEM. The graduate applies as a calculator engineer or researcher in engineering plants and also, after increasing the qualification in doctoral studies, as a researcher.   Admission Requirements Determined by Dean, may include entrance examination, other formal documents.   Graduation Requirement 120 ECTS Credits, Final state examination, Diploma thesis Course Structure Diagram with ECTS Credits List of courses is available at the detailed branch description page    30 ECTS credit per semester. [-]

Master Mechanical Engineering

FOM Hochschule
Campus Part time 4 semesters October 2017 Germany Essen

The Department of Mechanical Engineering networks the ability to analytical thinking with technical expertise with regard to content, strategies and methods, and allows you to exercise [+]

Master Mechanical Engineering

Degree: Master of Science (M.Sc.)

The Department of Mechanical Engineering networks the ability to analytical thinking with technical expertise with regard to content, strategies and methods, and allows you to exercise more demanding activities in many industrial sectors. You complete your studies with the academic degree Master of Science (M.Sc.).

In cooperation with: University of Bochum - University of Applied Sciences and the associated with the FOM IOM Institute of Economics and Management

Offered is the degree course in:

eat

Course content:

Course content may vary depending on the baseline. Based on the study preferences of students each university study centers regional profiles be carried out regularly majors and elective modules have developed. If the preferences of the students change, these programs would be adjusted accordingly.... [-]


Master’s degree in Mechanical Engineering ( taught in Italian )

University Of Bergamo
Campus October 2017 Italy Bergamo

Aim of the course is to provide students with in-depth knowledge on: design and management of industrial production systems; structural and functional design; materials and relevant working technologies; ... [+]

EDUCATIONAL OBJECTIVES Aim of the course is to provide students with in-depth knowledge on: design and management of industrial production systems structural and functional design materials and relevant working technologies modelling and analysis of products and processes life-cycle design and management of plants for energy conversion. Moreover, students can deepen still further some specific topics concerning: energy, biomedical engineering, mechatronics, production, design. JOB OPPORTUNITIES The postgraduate students can be employed in several industrial fields: mechanical and electro-mechanical industry energy production and conversion plants' design, installation and testing maintenance and management of machines, production lines, complex systems. Typical assignments for a postgraduate Mechanical Engineer are: design of complex devices and systems production management maintenance and management of machines, production lines and production departments. ADMISSION A Three-Year First level Degree or equivalent. ENTRY TESTS Individual interview. [-]

Master in Simulation Based Engineering Sciences – Applied Computational Mechanics

esocaet Studies by CADFEM
Online & Campus Combined Part time 4 semesters October 2017 Germany Landshut Ingolstadt + 1 more

Since 2005 many engineers and scientists have been successfully studying through the part-time master’s degree program Simulation-based Engineering Sciences (SBES), focusing on Applied Computational Mechanics. [+]

Top Part time Masters in Mechatronics in Europe. Program Overview 2005 marked the first time the part-time master’s degree program Applied Computational Mechanics was offered jointly by the universities of applied sciences Landshut and Ingolstadt as well as CADFEM. Since then many engineers and scientists have been successfully studying through the part-time master’s degree program Simulation-based Engineering Sciences (SBES), focusing on Applied Computational Mechanics. Possible Degrees Master’s (M.Eng., 90 ECTS-credits) Module studies Recognition of competencies, that participants already acquire at work Yearly program starts in September. Those with specific background knowledge may have the possibility to enroll later. Flexible Scheduling: Master’s degrees usually take four semesters to complete. With a reduced course-load it will take longer. Comprehensive combination of modules as needed Experienced professors from different universities and from industry The language of instruction is EnglishLifelong learning: Even after degree completion, you can take module coursework. Participant Group The ideal candidates are college graduates, who have already collected professional experience in engineering or science, and who are interested in a professional or managerial career in the field of product development with a focus on simulation. Since the study is supervised individually, it also takes into account the interests of newcomers as well as experienced professionals who wish to transfer from other applications. Thus, the offer is also open to professionals who have been contemplating a diploma, bachelor's, master's or even a doctoral degree. Module Course Offerings Structure Mechanics Solid Mechanics* Finite Element Method* Geometrical Nonlinear and Contact Analysis* Materials and Material Models* Computational Dynamics* Fatigue and Fracture Mechanics Multi Body Systems Mechatronics Mechatronics Interdisciplinary Topics Acoustics Mathematics and Computational Methods* Experimental Validation Modeling Techniques Optimization and Robust Design Scientific Programming Simulation Management Management of Product Development Project Work* Additional Themes Our partner universities offer modules from other areas of simulation-based engineering sciences such as fluid dynamics or human medicine. Information material with a complete module summary can be ordered by us. *Compulsory master’s program modules Master of Engineering (M.Eng.) The career-integrated program is a module-concept and contains 90 ECTS-credits total. Successful graduates will earn their Master of Engineering degree (M.Eng.), which enables them to apply for their doctoral degree thereafter. Time Period The study is divided into in-person and self-study phases. The classroom includes lectures, seminar-like classes and practical exercises. Overall, you need to plan for about 45 days of in-person attendance within two-years, as well as eight to ten hours per week for independent study. The classroom teaching takes place at one of the two universities, usually on Friday and Saturday. Thus, the program is specifically tailored to the needs of those who are working, and it can also be completed with longer travel distances. Sequence of Study Participants in the master’s program must first have their university degree, as well as at least one year of professional experience in the field of engineering or natural science. In the initial semester method-oriented and application-specific modules are at the forefront, of which you may select three yourself. As part of your previous employment or as part of your higher education, you probably already acquired some of these necessary on-the-job skills. Therefore, you may receive credit for the first semester modules if evidence of comparable skills is displayed after an individual examination. This can reduce the study period from five to four semesters for many students. Over the next three semesters at least nine specialized modules must be completed from the module listing, including seven compulsory modules. The elective courses can be selected from the module catalogue of the master program or from a range of cooperating higher education institutions, so long as they are equivalent. We are happy to provide personalized advising concerning the aspects of the first semester, and the possibility to earn credit through individual modules. The master thesis generally involves the scientific processing of a task for the student’s company. The final program component takes place through a master’s thesis defense at the university. Module Studies Each of the modules offered by the program can be taken individually. In order to achieve optimum learning, you should take note of the recommended prior knowledge. A module comprises 5 ECTS points and concludes with an examination. Under certain circumstances, the combination may be useful along with another module. Time Period The study is divided into in-person and self-study units. The live classroom portion will usually be on Friday and Saturday at one of the two universities and generally includes 9 to 10 half-days. For self-study, you should plan another 70 hours. Upon successful completion you receive a certificate of academic achievement. Module Study Offerings The current course offerings are available under the Module Overview tab. We would gladly fulfill personal requests for module descriptions, module specific requirements, and schedules, and are happy to advise you individually. Technische Hochschule Ingolstadt 5,300 students in 42 technical and economics courses, 126 professors in three faculties, two central institutions, 98 international partner universities and a modern administration - these numbers represent our university. So what is behind these numbers? First, it is the quality of our practical, hands-on teaching. The power of innovation in applied research also plays a big role. Finally, we have a campus with an attractive environment in the center of which is our students. The Technische Hochschule Ingolstadt has taught in the fields of Education Sciences since its founding in 1994, and always puts its graduates in a position to apply scientific methods in professional practice. The excellent amenities create the conditions for a short length of study coupled with and a rate of success. Landshut University of Applied Sciences Teaching and learning, research and development and training, to ensure lifelong learning—these principles have guided the work of University of Landshut since its founding in 1978. The five faculties Management, Electrical/ Industrial Engineering, Computer Science, Mechanical Engineering and Social Work offer 30 courses of study. Nearly 5,100 students will benefit from the practical relevance of teaching, as well as the individual support and modern equipment. These include a unique library, with the possibility to check-out books around the clock, as well as the data center and the well-equipped technical laboratories. In such an optimal environment, the graduates can fully concentrate on their studies. [-]

Master of Science in Electromechanical Engineering Technology

KU Leuven - University of Leuven
Campus 1 year September 2017 Belgium Leuven

The cornerstones of this programme are mechanical design and energy conversion. The former starts with an idea that is shaped in a graphical design and results in a finished product through choice of materials, simulation and production technique. Energy conversion is aimed at all aspects of energy efficiency in this process and ranges in practice from electrical controls and automation to thermal power plants, combustion engines, climatisation, etc. [+]

The cornerstones of this programme are mechanical design and energy conversion. The former starts with an idea that is shaped in a graphical design and results in a finished product through choice of materials, simulation and production technique. Energy conversion is aimed at all aspects of energy efficiency in this process and ranges in practice from electrical controls and automation to thermal power plants, combustion engines, climatisation, etc. Intelligent Manufacturing option The issues covered in this option include the latest production techniques; the way production systems operate; and the intrinsic relationship between production and other business processes, especially the design process. At the core of this option are the possibilities that computer-based systems offer in this context. Moreover, you learn to factor in the tension between technology, economics, and the environment and ergonomics. Intelligent Mechanics option The option Intelligent Mechanics relates to designing, developing and optimising automated mechanical machines. Based on a strong background in electricity and mechanics, you delve more deeply into aspects like advanced design methods, electronic operations, controls, measures and drives, data communication and visualisation methods. Intelligent Mobility option Intelligent Mobility deals with the sustainable application of smart solutions. Its application area is very broad, but examples include: fitting electric or hybrid cars with intelligent recharging systems and designing vehicles that can warn each other about accidents or traffic jams. Intelligent Mobility also has to do with choosing materials or production methods that have the smallest ecological impact possible, and optimally syncing transportation systems to one another. This is an initial master's programme and can be followed on a full-time or part-time basis. Add an in-company or project-based learning experience to your master's programme You can augment your master's programme with the Postgraduate Programme Innovation and Entrepreneurship. This programme is made up by a multifaceted learning experience in and with a company, with an innovative engineering challenge as the central assignment. It is carried out in a team setting, has a distinct international dimension, and usually requires a multidisciplinary approach. Entrepreneurs and students alike are encouraged to innovate, transfer knowledge and grow. It is a unique cross-fertilisation between company and classroom. Profile Are you a future industrial engineer? Are you a doer and are you fascinated by how and why things are done? Then you must be a future industrial engineer! - You enjoy looking into how to implement new ideas and improve old ones; - You prepare abstract designs for implementation in a business environment; - You like to link theory to practice; - You aim for a position of responsibility that allows you to apply your knowledge to concrete challenges in the day-to-day workings of a company; - You are eager to develop excellent communication and management skills. Objectives The Master of Industrial Sciences in Electromechanical Engineering is capable of: selecting, formulating, analyzing and answering appropriately a research question of his own choice based on a theoretical or practical problem in his area of technology while taking into consideration the paradigms and making use of appropriate research methodology. achieving maximum efficiency from products and machinery through computer-aided engineering in areas of dimension and control, materials design, kinematic, dynamic and thermal behaviour. analyzing and structuring problems of production control at the level of computer integrated manufacturing (CIM) and designing and implementing controls for installations. managing technology and communicating efficiently the results of his own work, study and research. continuing the process of self-education as well as coaching others in their development as individuals and professionals. integrating relevant research, work and/or study experiences acquired in other environments either at home or abroad. functioning and cooperating in multidisciplinary and international teams through project work and through an exchange of views and opinions. recognizing and taking into consideration the ethical, economic, ecological and aesthetic aspects and implications of his actions. International Students Diversity and an open mind are vital elements in the international learning and work environment at the Group T campus. The student population, staff, and guests come from all corners of the world, turning our campus into a true intercultural nexus for bachelor- and graduate-level education, university-industry collaboration, innovation and professional development. Advantages for international students - All of our undergraduate and graduate degree programmes are offered in English. English is ubiquitous both inside and outside the classroom. If you've mastered English, you'll feel right at home. - Admission to our programmes is not based on an entrance exam. Anyone with the necessary background can apply. - An engineering degree from KU Leuven's Group T campus is a stepping stone to universities and businesses worldwide. Our international network ensures that your degree is recognised by educational institutes and companies in Europe and across the globe. - Leuven is one of Europe's oldest university towns and is located in the heart of Western Europe - just 20 minutes from Brussels, and within easy reach of Paris, Amsterdam, and London. - Tuition fees are markedly lower than those of comparable universities in the US or the UK. Also, Leuven is a mid-sized university town, so cost-of-living expenses tend to be lower than those of other university towns. - The International Office at KU Leuven, Group T Campus has years of experience in welcoming international students from universities worldwide. [-]

Master in Automation and Mechatronics

Saint Petersburg Electrotechnical University
Campus 2 years September 2017 Russia St. Petersburg

The structure of the degree program consists of advanced professional studies, elective courses and Master’s Thesis. [+]

Top Part time Masters in Mechatronics in Europe. The structure of the degree program consists of advanced professional studies, elective courses and Master’s Thesis. The program provides students with a broad knowledge and skills in the field of automation of production processes and equipment, as well as in the field of mechatronic devices and systems control.Study of network technologies (Intranet- and of Internet-technologies), issues of SCADA-systems construction, practical use of real-time systems are important parts of the program.Students learn the principles of robotics and mechatronics, mechatronic and robotic actuators, modern technologies of microcontroller application.The program gives students a deep theoretical knowledge of modern methods of automatic control theory, in particular the methods of analysis and design of nonlinear, adaptive and intelligent control systems. Program curriculum includes the following advanced courses: Methodology and research logic; Modern problems of control theory; Non-linear, adaptive and intelligent control systems; The electrical and hydraulic actuators of mechatronic and robotic systems; Systems of ensuring a safety for technical control devices; Computer control technology in technical systems. Mastering computer technology is carried out in a laboratory-based, consisting of a research laboratory stands, equipped with the latest generation of industrial controllers and InfinitySuite SCADA-system. Programme: 120 ECTS credits, full-time study (2 years), Master’s Degree Eligibility: candidates must hold a Bachelor's Degree in the corresponding field Scholarship: scholarship covers the tuition fee and some study materials An academic year includes 2 semesters beginning on 1st September and 10th February, Winter holidays - 2 weeks, Summer holidays - 2 months (July, August). Master’s Thesis defense is in June. Educational programs of «LETI» are constantly modernized, following the principle «Training through research». Graduates of our university receive new, profound knowledge and practical skills of work. [-]

Masters Programme in Mechanical Engineering

Sapienza University of Rome
Campus 2 years October 2017 Italy Rome

The Master of Science in Mechanical Engineering aims at training young engineers with an advanced education, providing them with skills in designing, planning and managing complex activities of research and development in an industrial environment. This goal is achieved by means of a broad training proposal based on advanced mathematics and physics, [+]

The Master of Science in Mechanical Engineering aims at training young engineers with an advanced education, providing them with skills in designing, planning and managing complex activities of research and development in an industrial environment. This goal is achieved by means of a broad training proposal based on advanced mathematics and physics, and professional expertise targeted to the solution of complex engineering problems concerning design of processes, plants, systems, devices, machines. Engineering Design professionals educated at Sapienza can work as technology specialists in a wide range of fields, including manufacturing, mechatronic, transportation (automotive, naval, aeronautical and railroad), conventional and renewable energy production, biomechanics and many others. In these settings mechanical engineers are responsible for design, testing, manage, research and development services. The present Mechanical Engineering Course keeps the educational spirit and objectives since the origin of Mechanical Engineering in the most modern sense, during the industrial revolution in the eighteenth century. This continuity to the tradition is combined with the innovation in the didactic approaches, designed to transfer the research know-how of the academic staff in a continuous improvement of teaching experiences and methodologies. Becoming a “Mechanical Engineer” still gives an education of international relevance, and studying in Rome warrants the possibility of living a vivid industry-related cultural experience. [-]

MEng in Mechanical and Manufacturing Engineering

Dublin City University
Campus 1 year September 2017 Ireland Dublin

This Masters programme allows students to specialise in the widely established area of Mechanical and Manufacturing Engineering or to widen their knowledge from their undergraduate studies. [+]

Top Part time Masters in Mechatronics in Europe. Introduction This Masters programme allows students to specialise in the widely established area of Mechanical and Manufacturing Engineering or to widen their knowledge from their undergraduate studies. It enables graduates to apply their knowledge using computer–based technology to solve mechanical and manufacturing engineering problems. This programme introduces the use of advanced Computer Aided Engineering tools and, by experiencing these advanced techniques and software, the graduate will gain a vital edge. It allows the candidate to keep up with the rapidly changing manufacturing and design sectors. In addition, students can opt for a specialist Major in Sustainable Systems/Energy, or Biomedical Engineering. Who is eligible? To apply for this programme candidates must have an Honours degree in Mechanical and/or Manufacturing Engineering. Candidates whose first language is not English will be required to submit evidence of an English Language qualification. For more information on entry requirements please consult our website. Choice of Majors Sustainable Systems/Energy - There is a growing international market for Engineers in sustainable energy and development, eco– innovation, resource efficiency and clean–tech sectors. There are lots of career opportunities in the growing fields of Energy/Renewable Energy (wind, wave, solar, biomass etc.); a national priority area for Ireland. Biomedical Engineering - This discipline integrates the necessary aspects of biology and medicine with the technical engineering aspects required to engineer medical devices. The world of medicine is evolving and expanding rapidly, with new treatments and new diseases appearing all the time. As Ireland is a major player in Bioengineering, this Major provides graduates with specialisms required by industry. Structure The MEng in Mechanical and Manufacturing Engineering is designed to be completed in one calendar year of full-time study. It consists of two (full-time) taught semesters, followed by a practical project, completed between May and early September. The next intake for this programme will be September 2017. DCU offers a number of scholarships to international students each year. To be eligible to apply for a scholarship from DCU you must first apply to and receive an offer for a DCU Masters programme. Apply online for September 2017 entry at www.pac.ie/dcu using the PAC code DC814 [-]

Master in Industrial Mechanical Engineering

Free University of Bozen - Bolzano
Campus 2 years October 2017 Italy Bolzano

The aim of this two-year programme is to provide students with solid knowledge about mechanical engineering (mechanical design, production and plant maintenance, logistics and production planning, etc.) and its related fields. [+]

The aim of this two-year programme is to provide students with solid knowledge about mechanical engineering (mechanical design, production and plant maintenance, logistics and production planning, etc.) and its related fields. To this end, the course aims to form a modern mechanical engineer, able to integrate traditionally separated specialized fields, such as the mechanical design, mechatronics, automation, management and logistics ones. The degree course splits into two different branches in which students can specialize: “Mechanics and Automation” and “Logistics and Production”. Short description of the international Study Program The Master has been established at the Faculty of Science and Technology of the Free University of Bolzano (unibz). The Master is offered singularly from the Free University of Bolzano and has an international character. The path “Logistics and Production” is offered in collaboration with the Otto-von Guericke University of Magdeburg (OvGU) and allows obtaining a "double degree". Careers opportunities Graduates can expect to work in the industrial sectors in the following company’s functions: research and development, design, procurement, production, operational management, internal and external logistics and quality assurance. As well as for pursuing freelance careers as consultants, the course provides the students with the tools for working for companies in the manufacturing, mechanical and mechatronic, energy production and conversion, automation and robotic industries or in the public administration. The graduates’ activities will be directed toward designing and producing instruments, engines, machines and other mechanical equipment and/or managing materials procurement, operations management and logistics. [-]

Master Mechatronics / Systems Engineering

Hochschule Aalen
Campus Part time 3 - 5 semesters November 2017 Germany Aalen

As mechatronics system engineer you will explore one of the most interesting and diverse activities offered by the industry today. System engineers are professional managers with a broad interdisciplinary area of ​​responsibility. They are required in their profession as a whole person ... [+]

Top Part time Masters in Mechatronics in Europe. As mechatronics system engineer you will explore one of the most interesting and diverse activities offered by the industry today. System engineers are professional managers with a broad interdisciplinary area of ​​responsibility. They are required in their profession as a whole person. System engineers want to know more ... not just when studying, but also at work. For them, "lifelong learning" is not an empty slogan, but a daily reality. System engineers as specialists for the whole That the mechatronics mechanics, electronics and software merges together, is now well known. But if one specialist in mechanics, electronics and software can alone develop a sophisticated mechatronic system that rarely goes well. "A system is more than the sum of its parts" - a special expertise is in accordance with the development of mechatronic systems required that goes beyond the pure technical knowledge of mechanics, electronics and software. The mechatronics system engineer knows and shapes the relationships and interactions between the parts of the system. He is like the "specialist for the whole". Mechatronics - Systems Engineering The master program "Mechatronics - Systems Engineering" provides qualified graduates the opportunity to specifically prepare for a future career as a mechatronic system engineering. The mechatronics degree programs of universities and Aalen Esslingen have by pooling their resources and skills the course in cooperation together. The master's degree can be both full-time (3 semesters) and part-time (5 semesters) are studied. As a graduate you wear the academic degree "Master of Engineering (M. Closely.)". The certificate will be issued jointly by the universities Aalen and Esslingen. The courses of the program in the summer semester in Aalen place and in the winter semester in Göppingen. Since the lectures do not build on each other, the baseline is possible both in summer and winter semester. Content of the program The program deepens specific mechatronic-interdisciplinary subjects, without specializing in specific industries or applications. He is a solid basic knowledge mechatronic advance and therefore reiterates few content from the Bachelor studies. The core of the curriculum forms a series of courses, which are all based on the central idea of ​​the model-based mechatronic design. The other half of the courses concerned with special fields that are important for mechatronics professionals of tomorrow. At the request of our students, we have now also taken options in the curriculum. We are confident that our elective modules will come to medical systems and mobile robotic systems on your interest. Alternatively you can also select a module from another master's degree at the University of Aalen. Laboratory equipment and industry contacts Who wants to work in a practice-oriented, requires a reasonable laboratory equipment. In fact, offer the six participating at our Master's program mechatronic laboratories in Aalen and Esslingen an outfit that leaves little to be desired. Good contacts with the industrial enterprises of the region it easier to find interesting master theses and subsequent career. Our motto: Small but powerful The professors of the course is a seminar-teaching at heart, in the room for questions and discussions remains. In the good learning environment is one of the strengths of our program - which is reflected back to us by our students. But this is only in groups possible that are manageable in size. Conversely, this means that we have to limit the number of places. Therefore in the summer term we take on only 10 new entrants in the winter semester 15th Of course we are very happy about the great interest in our study. Unfortunately, this also means that we can not always take account of all eligible applications. Individual approach Our students come from various universities and from various disciplines to us. They bring with individual professional knowledge and interests. For us, this results in the challenge to meet the individual differences justice. Studying part-time The program "Mechatronics - Systems Engineering" is also aimed explicitly at engineers who are already working and want to use a master's degree to to further qualify or possibly also a new career direction. We are pleased that we can now welcome a significant number of students with professional experience with us. For students who want to pursue while studying a profession, we offer a part-time version of the program. Admission Requirements To the Master Mechatronics - to study systems engineering, you should have a Bachelor of mechatronics, mechanical engineering or a "related" degree program have been completed with an overall grade of 2.4 or better. What is a "related" degree, we define the basis of a list of core subjects. [-]

Master's in Mechanics of Materials and Structures (MMS)

University of Girona
Campus 1 year September 2017 Spain Girona

The Masters in Mechanics of Materials and Structures is aimed at students who wish to develop their knowledge and skills in the field of the mechanical behaviour of materials and structures. [+]

The Masters in Mechanics of Materials and Structures is aimed at students who wish to develop their knowledge and skills in the field of the mechanical behaviour of materials and structures. Its objective is to link the current knowledge of theories of the behaviour of materials with the most innovative techniques in structural engineering. The proposed syllabus places special emphasis on computational techniques, materials mechanics, advanced structural design and experimental techniques. The masters provides students with the skills to understand the aims of the disciplines involved and with the capacity to design solutions to advanced problems in this field. [-]

Master of Renovation of Buildings and Facilities

European Polytechnical University
Campus 3 semesters October 2017 Bulgaria Pernik

Reconstruction and modernization are considered in the context of durability, reliability and improved operating parameters of the microclimate for energy efficiency. [+]

Top Part time Masters in Mechatronics in Europe. Master of Renovation of Buildings and Facilities ADMISSION: on documents; REQUIREMENTS: applicants with acquired Bachelor degree on Civil Engineering or similar programs, higher education, recognized in EU; average rating of the diploma - Good; document for English language proficiency. DURATION: 1,5 academic years (3 semesters). DIPLOMA: Master in Renovation of Buildings and Facilities. This Master's program is designed for graduated civil engineers to extend their knowledge in the area of reconstruction and modernization of building and facilities. Reconstruction and modernization are considered in the context of durability, reliability and improved operating parameters of the microclimate for energy efficiency. The graduates will gain professional knowledge and skills to: resolve structural and technological issues related to the renovation of buildings and facilities, including repair and strengthening of building constructions, selection and application of appropriate interior and exterior materials and systems, and management and economic efficiency. The graduates will be prepared to find professional realization as: Designers of building and facilities, subject to renewal, reconstruction and modernization; Consultants, technical experts and managers of activities related to renovation and reconstruction of buildings and facilities; Professionals monitoring bodies, international organizations in the field of construction, consulting companies, etc. Note: The fees are €1000 per semester for EU students and €2000 per semester for non-EU students. All excellent students study FREE of any charges. The student loan information can be found on this page: http://epu.bg/index.php/en/application/students-loans [-]

Master's Degree in Mechanical Engineering

University of Ferrara
Campus 2 years October 2017 Italy Ferrara

Our MSc in Mechanical Engineering course is designed for students who desire advanced training in areas of mechanical engineering such as acoustics, energy conversion systems, fluid mechanics, heath transfer, logistics, metallurgy, corrosion and metals protection, polymer and composite materials, robotics, structural integrity, turbomachinery and vibrations... [+]

Our MSc in Mechanical Engineering course is designed for students who desire advanced training in areas of mechanical engineering such as acoustics, energy conversion systems, fluid mechanics, heath transfer, logistics, metallurgy, corrosion and metals protection, polymer and composite materials, robotics, structural integrity, turbomachinery and vibrations. It is a two-year course corresponding to 120 credits and access is limited to students with a bachelor’s degree awarded by obtaining 180 credits referable to basic knowledge in Mechanical Engineering (e.g. our BEeng in Mechanical Engineering). The final examination prior to the award of the MSc in Mechanical Engineering requires the public defense of a MSc thesis. Graduates may work in an industrial or governmental laboratory, or continue their training toward a doctoral degree in mechanical engineering, applied mechanics, or a related field. Moreover, they fulfill the curricular requirements to become Chartered Engineers in Italy. [-]

Engineer "materials And Mechanical"

University of Technology Troyes - UTT
Campus 4 years September 2017 France Troyes

This training in three years prepares the engineer to identify new materials and be able to implement manufacturing processes tailored to the company's production system. [+]

Top Part time Masters in Mechatronics in Europe. Dual training (apprenticeship or continuing education) This training in three years prepares the engineer to identify new materials and be able to implement manufacturing processes tailored to the company's production system. The engineer MM (former Pmom) meets this requirement with its versatility; it is close to field teams, able to provide innovative solutions tailored to the needs of its business customers and its technological and industrial constraints. The training leads to a diploma "UTT Engineer Materials and Mechanics", approved on 14/12/2010 by the Engineering Titles Commission. It is delivered in partnership with the CFA for higher education in Champagne-Ardenne. Frédéric SANCHETTE, Director of antenna UTT Nogent and Training Manager MM "The installation of the UTT in the heart of Haute-Marne industrial basin is an ambitious and exciting challenge for all institutional actors and local industry . The welcome was reserved for teachers and first engineers-apprentices augurs a promising future of Nogent antenna UTT. We are very confident in the ability of our students to integrate the industry due to the combination of a recognized qualification and benefits of alternation: immersion in business and experience in the field. "Xavier DUPONT, student of the first class MM (former Pmom). Xavier Dupont was already used for a year as a technician in aeronautics when he discovered the WM formation (formerly Pmom). Today he is hired by the Safran Group. "The training that combines mechanics and materials was what I was looking for. The fact that a stay abroad is part of the curriculum Pmom also counted in my choice. I feel very well here. It is very user friendly. There is a good cohesion in our promotion. And the means at our disposal are great! The proximity of the teaching staff is another highlight, specificity. Contact with teachers is direct and permanent. Everything is done so that you feel good! " The industrial partnership Training is built in close connection with the Nogentech association, which groups the industrial enterprises Haute-Marne, the first French pole of implementing matériaux.http: //www.nogentech.org Apprentices can however work in companies throughout France where UTT has contacts because of its 500 graduate engineers per year. Jean-Loïc SQUARE, engineer, director of the High Technology Center of Champagne. "Department of strong industrial tradition, Haute-Marne welcomes the leading sectors of industries such as automotive, aerospace, energy and medical and internationally recognized leaders: Hachette & Driout, one of the steel mills modern in Europe, Ferry-Capitain, global specialist in very large rooms, Forges de Courcelles and his press 8000 tons and in the medical field: Marle, Aesculap, Greatbatch, Landanger ... This excellence motivated the General Council, the GIP52 and their institutional partners to create the Technology Center of Upper Champagne in Nogent, in partnership with UTT, CRITT-MDTS and Nogentech, local cluster of sixty companies, certified by DATAR. The UTT engineering apprenticeship and research UTT complement an ambitious system of economic development and support for technological innovation, thereby strengthening our competitive advantages in the global market. The strong involvement of local communities in Chaumont Nogent Langres and contributes to the reception of students and animation of a rich associative and cultural life. " Trades production engineer ; R & D engineer, engineering; methods engineer. Sectors Mechanical Industries Equipment for the Automobile, Aerospace, Rail Forges and Foundries Plastics Energy Facilities (Nuclear) Engineering Mechanics Materials and skills choose metallic or non-metallic materials having a specific need select, validate, and implement effectively adequate industrial processes define and implement testing and industrial drivers needed Use and master the tools of CFAO, industrial management and continuous improvement support innovation in interface between management and field teams Pedagogy training General lessons m Mainstream and strength of materials; manufacturing processes; tools and design methods; quality and industrial systems; management of projects, management and business management. Alternating periods Years 1 and 2: alternating rhythm of 15 days / 15 days: the antenna of Nogent (52) of the UTT in the Haute-Champagne technological pole The 5th semester: at UTT Troyes, integrated students The 6th semester takes place entirely in Business Inductive teaching and projects The apprentice must complete projects within their business, which will be evaluated by the company and by UTT: Semester 1: Discovery of the company and its environment; semesters 2 and 3: industrial project; semester 3-4: International Project: Preparation and industrial living abroad; 4 semester: research project and experimentation; 6 semester: final project study. Teaching 5th grade at UTT: credits choice Most UV branches "Mechanical Systems" and "Materials: technology and economy", are available to apprentices and trainees MM. For example : Technical purchasing and cost reduction; eco-design; product life cycle management and collaborative engineering; design of information systems. Also available are many UV of "Industrial Systems" branch, Technology and Humanities, foreign languages ​​(in addition to the mandatory English). [-]