Master Degree in Manufacturing in Europe

See Masters Programs in Manufacturing in Europe 2017

Manufacturing

A masters refers to the completion of a graduate study program that prepares students to further their knowledge of a specific subject or advance their careers. The majority of masters are granted by state or public universities.

A Master in Manufacturing is concerned with the analysis of problems within areas of the manufacturing areas. It performs this analysis by using computer implementation, case studies or modelling techniques. Graduates will be able to perform in a variety of areas that have a manufacturing process.

Europe, one of the world's seven continents, is usually known as the westernmost peninsula of Eurasia. Second smallest continent, with 10,180,000 (km2), the area regroups 50 countries.

View all Master Programs in Manufacturing in Europe 2017

Read More

Master Advanced Manufacturing Processes for Aeronautical Structures (AMPAS)

Ecole Des Mines D’Albi-Carmaux | EMAC
Campus Full time 1 year September 2017 France Albi

The Advanced Master course AMPAS, is designed by Mines Albi and ISAE with the support of aeronautical industry partners. [+]

Masters in Manufacturing in Europe 2017. Master Advanced Manufacturing Processes for Aeronautical Structures (AMPAS) A booming industry After a short recession period, the Aeronautical industry market is facing a rapid and continuous increase worldwide as shown by the record breaking contracts recently signed by both Airbus and Boeing. These two industry leaders forecast an increase of close to 5% in activity over the next years and estimations indicate that the annual increase of large commercial airplanes will induce a doubling of the number of aircraft by 2030. Nearly sixty percent of the turnover is subcontracted all over the world and concerns mostly production and manufacturing activities. As a consequence most aeronautical subcontracting companies will have to increase their production rates but also to keep up to date with technological changes; moving from metallic processes toward composite materials processes. Moreover the aircraft manufacturers have changed their supply chain structure in the last years, and subcontractors are now required to manage more complex parts and to take over, on their own, the qualification processes. At the heart of Europes Aerospace Valley The Midi-Pyrénées is home to the global headquarters of Airbus and over 600 subcontracting businesses, employing more than 60,000 employees. The French space agency (CNES), as well as Thales and EADS Astrium are also present in the area along with their lot of subcontractors. The Ecole des Mines d’Albi and Institut Supérieur de l’Aéronautique et de l’Espace (ISAE), have both a proven track record of leading research and working alongside industrial partners in the aeronautics industry. This master program is accredited by the French “Conference des Grandes Ecoles” A formation tailored to the need of the industry The Advanced Master course AMPAS, is designed by Mines Albi and ISAE with the support of aeronautical industry partners. It will give a specialization to master level students allowing them to take over high level responsibilities in airframe structure manufacturing plants. It is especially well suited to students who have followed general studies in mechanical engineering, material science or equivalent and who would like to gain a major chance to be recruited by aeronautical industry. To reach this goal, AMPAS master students will develop: general knowledge of flight dynamics constrains and airframe design knowledge and understanding of the airframe materials and processes and their qualification constrains knowledge, understanding and practice of the prevalent processes for structural applications with either metallic or fiber reinforced thermoset composites materials ability to use state of the art simulation tools for definition and optimization of metallic sheet forming and RTM/infusion process knowledge of the aeronautical supply chain structure and their communication rules understanding of the aeronautic dedicated quality and management requirements knowledge and practice of lean manufacturing tools ability to undertake manufacturing projects in an international team environment ability to communicate with written reports and by oral presentation Lecturers Professoral staff form Ecole des Mines Albi and ISAE (Institut Supérieur de l'Aeronautique) and more generally from University of Toulouse Experts form Aeronautical Insdustry, especially from AIRBUS and supply chain Experts from certification, quality, supply chain organization and management Requirements Applicants must have a Master degree, or an equivalent degree in science or engineering, or a bachelor degree with 3 years of professional experience at least. English Language Requirements IELTS band: 6 TOEFL paper-based test score : 550 TOEFL iBT® test: 79 Contents A balance of theoretical learning and practical experience: The course consists of 75 credits mixing academic teaching and professional experience. First semester: academic term of 450h and 45 credits, provided by permanent professors of Mines Albi and ISAE and expert practitioners from aerospace industry to bring current knowledge and experience. The teaching, balancing academic lessons with more applied practice. Second semester: Professional thesis in the aeronautical industry or in an academic research lab in collaboration with aeronautical industrial partners, in France or abroad. The duration is from 5 to 6 months and corresponds to 30 credits. Students are supervised by a tutor from the host organization and from Mines Albi or ISAE. Thesis is concluded by the preparation of a final report and an oral dissertation in front of a jury. Syllabus The academic course consists of 450 hours of taught modules aiming to provide a deep knowledge of the three main material families used in airframe structures (i.e. aluminum, titanium and long fiber reinforced polymer composites) as well as their related forming routes relevant to aeronautical industries. It is also devoted to gain knowledge in aircraft architecture, on aeronautical supply chain specificities, lean manufacturing and quality management required to be able to take over technical and organizational responsibilities in industry. A team project (100 hours) will demonstrate the ability to address an aeronautical part processing problem following the theoretical and professional skills. In more details: 1. Aircraft, material and process basic scientific knowledge Aircraft General Knowledge Flight Dynamic Structure and Airframe Design Aeronautical materials and processes Aluminium and titanium alloys Epoxy and thermoplastic composites Assembly processes Material and processes qualification NDT and shape control techniques NDT for metallic and composite materials Optical techniques for assembly aid Computer Aided Design 2. Composite structure forming and machining Processes Physical phenomena description and modeling related to epoxy based manufacturing Raw material and composite quality control LCM/RTM processes Autoclave Vacuum Bagging (monolithic - sandwich) processes Composite material trimming, drilling and assembly RTM/Infusion Simulation 3. Metallic structure forming and machining processes Material behaviour and mechanical model Cold and hot sheet forming processes Surface treatments Metallic material machining Sheet forming simulation 4. Industrial Organization and Management Supply chain structure and organization Materials management and Lean manufacturing Supply chain improvement and collaborative processes Quality management and tools 5. Integrated Team Project 6. Internship and Professional Thesis (2nd semester) [-]

Masters in Leather Engineering - IN FRENCH

ITECH Lyon
Campus Full time 3 years France

ITECH leather engineers work for large chemistry product firms, in tanneries and taweries and for the users: leather shops, shoe makers... [+]

ITECH is the only institution in world that offers an engineering degree in leather that suits the industry in all its aspects. The leather engineer’s job involves the transformation of raw skin into leather by supplying it with main parts of its added value. Practical workshops are essential and dominant in this major. There’re many qualities that are required: observation, touch, practical knowledge, rigor, esthetical. ITECH leather engineers work for large chemistry product firms, in tanneries and taweries and for the users: leather shops, shoe makers... The leather market spreads worldwide and also requires extreme mobility, polyvalence and adaptability. Admission for Students outside France 1st year admission: Graduate studies in chemistry (Bachelor’s degree or equivalent , 180 ECTS) A satisfying level in French: B2 CERF + interview with ITECH 2nd year admission: 1 year of postgraduate studies completed (M1 or equivalent, 240 ECTS) How to apply? Visit and register at inscription.itech.fr (for EU students) Or Apply through Campus France site (CEF procedures): For countries which do not have CEF procedures with France, you must do an Application for Preliminary Admission (DAP) to the cultural service of the French embassy in your country of residence. Please visit www.campusfrance.org/en/applying-other-countries for details. Tuition fees Tuition fees for the French Section are 6 500€/year. Hands on training ITECH is adamant in supplying students with a strong professional experience. On top of a multidisciplinary teaching, the institute adds a 10 month minimum of mandatory internships in companies for the regular status students. End of 1st year: International experience - minimum 6 weeks This international experience is prepared in advance in terms of an intercultural approach and the expectations regarding the content of the report are fully defined. This is an individual review of each student’s experience and acts as a basis for reflection during the intercultural lessons the following term. End of 2nd year: Engineering placement - minimum 8 weeks Practical application with privileged trainee status allows students to come face to face with the realities of corporate life and become acquainted with companies’ material, economic and human requirements. End of 3rd year: Final year project - maximum 6 months This is a project generally entrusted to young engineers. Students demonstrate that they are capable of acting autonomously and tackling complex subjects in situations that can, at times, prove complex. The project involves a minimum 5-month placement with a company or laboratory either in France or abroad. The Region Lyon is located in the south-east of France, on the confluence of the Rhône and the Saône Rivers. It stands on a geographical crossroads, to the North of the natural corridor of the Rhône valley (which stretches from Lyon to Marseille). With the Lyon-Saint Exupéry international airport and three TGV high-speed train stations, Lyon is connected to all major European cities and the world! Lyon is only 2 hours by TGV to Paris and 1hr40 to Marseille and the Mediterranean. If it's mountains you prefer, the Alps are a mere 90 minutes away by car, the Massif Central only 30 minutes away. Historically, Lyon is an industrial city and therefore houses many petrochemical industries along the Saône and Rhône Rivers, in the so-called ‘chemistry corridor’. Lyon is also the city with the second largest number of students in France, with three universities and many engineering schools. In terms of its population, it’s the 3rd biggest city in France, with over 470,000 inhabitants, and the second largest agglomeration after Paris (2 million inhabitants). [-]

MEng in Mechanical and Manufacturing Engineering

Dublin City University
Campus Full time 1 year September 2017 Ireland Dublin

This Masters programme allows students to specialise in the widely established area of Mechanical and Manufacturing Engineering or to widen their knowledge from their undergraduate studies. [+]

Masters in Manufacturing in Europe 2017. Introduction This Masters programme allows students to specialise in the widely established area of Mechanical and Manufacturing Engineering or to widen their knowledge from their undergraduate studies. It enables graduates to apply their knowledge using computer–based technology to solve mechanical and manufacturing engineering problems. This programme introduces the use of advanced Computer Aided Engineering tools and, by experiencing these advanced techniques and software, the graduate will gain a vital edge. It allows the candidate to keep up with the rapidly changing manufacturing and design sectors. In addition, students can opt for a specialist Major in Sustainable Systems/Energy, or Biomedical Engineering. Who is eligible? To apply for this programme candidates must have an Honours degree in Mechanical and/or Manufacturing Engineering. Candidates whose first language is not English will be required to submit evidence of an English Language qualification. For more information on entry requirements please consult our website. Choice of Majors Sustainable Systems/Energy - There is a growing international market for Engineers in sustainable energy and development, eco– innovation, resource efficiency and clean–tech sectors. There are lots of career opportunities in the growing fields of Energy/Renewable Energy (wind, wave, solar, biomass etc.); a national priority area for Ireland. Biomedical Engineering - This discipline integrates the necessary aspects of biology and medicine with the technical engineering aspects required to engineer medical devices. The world of medicine is evolving and expanding rapidly, with new treatments and new diseases appearing all the time. As Ireland is a major player in Bioengineering, this Major provides graduates with specialisms required by industry. Structure The MEng in Mechanical and Manufacturing Engineering is designed to be completed in one calendar year of full-time study. It consists of two (full-time) taught semesters, followed by a practical project, completed between May and early September. The next intake for this programme will be September 2017. DCU offers a number of scholarships to international students each year. To be eligible to apply for a scholarship from DCU you must first apply to and receive an offer for a DCU Masters programme. Apply online for September 2017 entry at www.pac.ie/dcu using the PAC code DC814 [-]

Master in Product Development and Materials Engineering

Jönköping University
Campus Full time 2 years September 2017 Sweden Jönköping

As competition between companies is getting tougher as the number of products on the market increases, many are realising the importance of product development and material knowledge as a competitive means. This programme covers the entire product development process, from conceptual engineering design to materials and manufacturing processes. [+]

As competition between companies is getting tougher as the number of products on the market increases, many are realising the importance of product development and material knowledge as a competitive means. This programme covers the entire product development process, from conceptual engineering design to materials and manufacturing processes. The work of engineers within product development is creative and offers a great deal of variety. This Master's programme (two years) qualifies students for positions with the manufacturers and suppliers that develop and produce components or as consultants. Emphasis is placed on design and construction of technical components and products in regards to customer demands, use, producibility and production methods. Vehicles, household appliances, medical equipment and certain sporting goods are all examples of products made up of complex components. Making complex things simpler The steady increase in the use of computer support makes possible new methods, which are parallel to the entire product development process. With the help of advanced computer tools in design and construction, real and virtual prototypes can be produced much faster, and the time needed for development can be shortened. In addition, a product can be studied and tested at an early stage of product development for its design, usability, durability, safety and producibility. Important aspects of work with the development of components and products include the analysis of function and performance, the choice of materials and the methods of production. This programme gives an understanding of the theory behind and the practical use of the computer based tools needed for these tasks. Industry contacts and guest speakers Some of the courses include project work. Students can, in smaller groups, analyse and make suggestions regarding real-life problems taken straight from the industry. Guest speakers from the field also take part in instruction. A thesis at the end of the programme helps students apply their theoretical knowledge and gain insight as to the research and development within the industry and the university. Extensive knowledge about materials is also acquired. The School of Engineering has well-equipped research labs for materials engineering and computer simulation. Next generation of engineers The School of Engineering, Jönköping University, is a member of the prestigious collaborative between leading engineering schools worldwide - the CDIO Initiative™. The CDIO Initiative is an innovative educational framework to conceive and develop a new vision of engineering education and for producing the next generation of engineers. The programme qualifies you for positions with manufacturers and suppliers that develop and produce components, or as consultants. Courses within the programme NB Preliminary list of courses Year 1 Industrial Product Realisation: Process - Methods - Leadership 9 Credits Materials And Design 6 Credits Non-Linear Finite Element Analysis 9 Credits Elective Course:Advanced CAD 6 Credits Elective Course:Multivariable Calculus 6 Credits The course multivariable calculus is compulsory to students who have not studied this course during their bachelor studies. Computer Programming For Design Automation 6 Credits Functional Materials And Surfaces 6 Credits Integrated Product Development 12 Credits Optimisation Driven Design 6 Credits Year 2 Advanced Materials Technology 6 Credits Computer Supported Engineering Design 9 Credits Industrial Placement 9 Credits Modelling And Simulation Of Casting 6 Credits Final Project Thesis, Master 30 Credits Facts Credits: 120,0 credits Level: Master's Rate of study: Full-time Place of study: Campus-based Language: English Start date: Autumn 2016 Requirements: The applicant must hold the minimum of a bachelor's degree (ie. the equivalent of 180 ECTS credits at an accredited university) with at least 90 credits in mechanical engineering or equivalent. The bachelor's degree should comprise a minimum of 21 ECTS credits in mathematics. Proof of English profiency is required. [-]

Master in Manufacturing Engineering

University West
Campus Full time 1 - 1 year September 2017 Sweden Trollhättan

The current globalisation offers many opportunities for work in international companies and abroad. It also means that competition is stiffer and that it is importan [+]

Master in Manufacturing Engineering

The current globalization offers many opportunities for work in international companies and abroad. It also means that competition is stiffer and that it is important to be adequately educated. Manufacturing engineering is one of the strongest areas of University West and in this one-year master programme, you have the possibility to improve your CV, for a career in the manufacturing industry, global corporations, or for an academic career. The education offers both specialized technological knowledge as well as breadth within manucfacturing engineering, which is a necessety for leading positions in the industry.

 ... [-]