Part time Master's Degree in Engineering in Canada

Compare Part time Master Programs in Engineering in Canada 2017

Engineering

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Improvements made to manmade things such as tools, structures and machines are largely due to the efforts of people in the field of engineering. These people combine creativity with mathematics and worldly knowledge, resulting in innovation.

 

Canadians place great importance on learning, and have developed a first-rate education system with high standards. Not only does Canada provide a safe, clean environment, but it has been consistently ranked as one of the world’s best places to live in terms of quality of life by the UN.

Start Today Best Part time Masters Degrees in Engineering in Canada 2017

Read More

Specialized Graduate Studies In Engineering (project Type)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

Best Part time Masters in Engineering in Canada. The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and to increase their skills in various fields of engineering and project management with graduate courses. Enable professional development short to candidates with an undergraduate degree to complete their training and to increase their skills in different areas of engineering with graduate courses. More specifically, the student should, on completion of its curriculum: have gained extensive knowledge in one or more specialties related to engineering; be able to apply this knowledge to issues and situations or various projects related to its specialization. have developed the necessary skills and abilities to participation in industrial innovation projects. [-]

Specialized Graduate Studies In Engineering (model Course)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and to increase their skills in various fields of engineering and project management with graduate courses. More specifically, the student should, on completion of its study program: have gained extensive knowledge in one or more specialties related to engineering and project management; be able to apply this knowledge to issues and situations or various projects related to its specialization. have developed the skills and abilities necessary for the conduct of industrial innovation projects or from the industrial sector in the field of his specialization. [-]

Master Of Engineering (type Course With Project)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Lévis

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. [+]

Best Part time Masters in Engineering in Canada. The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance and management of industrial systems Telecommunications and information processing photonics Remote sensing Signal Processing Telecommunication and satellite communication and wireless Etc. Employment Opportunities Graduates senior engineering graduate programs occupy positions in several industry sectors such as: electronic; instrumentation and control; telecommunications; aerospace; design; manufacturing; automating; production engineering; energy; aviation; pulp and paper; metal processing; transport; Computer Engineering; wind engineering; marine engineering; R and D. The main functions for Graduates are: project manager; Director of R & D; researcher or associate researcher; systems engineer; project engineer; systems designer; responsible for experimentation; product development engineer; PhD student (for master's degrees). OBJECTIVES Contribute to increasing the scientific and technical knowledge in engineering, introduction to research and technological innovation and form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science . More specifically, the student should, on completion of its study program: having acquired more knowledge in some of the science and technology related to engineering; be able to apply this knowledge to issues, situations or various projects related to its specialization; demonstrate a critical able to propose and evaluate solutions to specific engineering problems; be able to conduct an engineering project in its area of ​​specialization; demonstrating that it is able to communicate orally and in writing in a clear and consistent manner, the results of scientific research work. The memory without profile (type course) promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. [-]

Master Of Engineering (with Memory)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski

The master of engineering is to improve scientific and technical knowledge in engineering, [+]

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance and management of industrial systems Telecommunications and information processing photonics Remote sensing Signal Processing Telecommunication and satellite communication and wireless Etc. Employment Opportunities Graduates senior engineering graduate programs occupy positions in several industry sectors such as: electronic; instrumentation and control; telecommunications; aerospace; design; manufacturing; automating; production engineering; energy; aviation; pulp and paper; metal processing; transport; Computer Engineering; wind engineering; marine engineering; R and D. The main functions for Graduates are: project manager; Director of R & D; researcher or associate researcher; systems engineer; project engineer; systems designer; responsible for experimentation; product development engineer; PhD student (for master's degrees). OBJECTIVES Contribute to increasing the scientific and technical knowledge in engineering, introduction to research and technological innovation and form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science . More specifically, the student should, on completion of its study program: having acquired more knowledge in some of the science and technology related to engineering; be able to apply this knowledge to issues, situations or various projects related to its specialization; demonstrate a critical able to propose and evaluate solutions to specific engineering problems; be able to conduct an engineering project in its area of ​​specialization; demonstrating that it is able to communicate orally and in writing in a clear and consistent manner, the results of scientific research work. In the thesis promotes the development of the research component of the candidate's training by deepening knowledge in a field of specialization; [-]

Master of Engineering

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. [+]

Best Part time Masters in Engineering in Canada. MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. MEng degrees are available in: Electrical Engineering Electrical-Computer Engineering Mechanical Engineering Materials Engineering Industrial Engineering Environmental Engineering Civil Engineering General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. Program Requirements An MEng Degree may be awarded upon successful completion of a total of 8 courses (the MEng has no research component/thesis/work with a faculty supervisor). Of these 8 courses ... 5 to 8 must be from the student's department (major; electrical, electrical-computer, mechanical, materials, industrial, environmental, civil) 0 to 3 may be from another engineering department 0 to 2 may be from a department outside of engineering Co-op work experience is optional [-]