Master's Program in Engineering & Technology in Ireland

See Masters Programs in Engineering & Technology in Ireland 2017

Engineering & Technology

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Studies in engineering and technology prepare you for the technologically oriented workforce of today.

Members of the workforce with engineering and technology training are sought out by many industries including medical research and computer software development.

 

Ireland lately implemented a law, which mandates all students attending university education to apply for government loans to allow them achieve their higher academic dreams. First official language is Irish, also known as Irish Gaelic, but English (the second official language) is more widely used. The national capital is Dublin. Ireland is famous for celebrating Saint Patrick’s Day (17 March) all over the world.

Top Master Programs in Engineering & Technology in Ireland 2017

Read More

Masters in Development Practice

Trinity College Dublin
Campus Part time 2 years September 2017 Ireland Dublin

The two-year Masters in Development Practice encompasses an integrated theoretical and practical approach with multidisciplinary training in four “pillars”- health, natural, social, and management sciences. Eighteen core academic modules (link) provide rigorous training across the core pillars, complemented by masters level training in research design, methodology, and methods including training in leading edge quantitative... [+]

Best Masters in Engineering & Technology in Ireland 2017. Masters in Development Practice Established in 2009 following recommendations from the International Commission on Education for Sustainable Development Practice, the Global Masters in Development Practice (MDP) is a world-leading and uniquely innovative interdisciplinary graduate degree programme that blends health, natural, social, and management sciences--combined with cross-sectoral field training and professional local and international work-based placements to better understand international development problems and best practices. The Dublin MDP is a member of this global network of Master’s in Development Practice, headquartered at Columbia University, New York, linking with over 30 universities and hundreds of partner organisations worldwide. The two-year Masters in Development Practice encompasses an integrated theoretical and practical approach with multidisciplinary training in four “pillars”- health, natural, social, and management sciences. Eighteen core academic modules (link) provide rigorous training across the core pillars, complemented by masters level training in research design, methodology, and methods including training in leading edge quantitative, qualitative, and digital tools and techniques. The programme includes four work-based placements (link) which provide hands-on practical experience for students, both in International Development NGOs and International Intergovernmental Organisations. This programme aims to create a new generation of development practitioners with the skills to implement and manage comprehensive approaches to sustainable and efficient development. The Dublin MDP is a joint degree led by the Trinity College Dublin (TCD) School of Natural Science and University College Dublin (UCD) School of Politics and International Relations, and delivered by staff from all faculties across the universities, in collaboration with leading scientific researchers, and national and international organisations with specialist skills. Course Modules The Dublin MDP it combines a range of teaching and learning approaches both in the seminar room and in the field. Students engage in a minimum of eighteen class-room based modules and four work-based placements to gain hands-on practical experience during the programme. Specialist skills are formed across a range of areas including research design and methods, development economics, global health, gender, climate change and climate justice, governance and politics and language training. Students engage with leading experts, practitioners, and academics both in the classroom and in the field. Students also produce a dissertation drawing upon research conducted during fieldwork modules. These have attracted attention from policy-makers, such as the Minister of Education in Rwanda. Year 1 Modules: Tropical Agriculture (Natural Sciences Pillar) Climate Justice, Human rights, & Development (Social Sciences) Economic Policy & Analysis I (Social Sciences) Economic Policy & Analysis II (Social Sciences) Irish NGO Placement (Management) Fieldwork 1 (Management) Global Health (Health Sciences) Global Classroom (Cross-Disciplinary) Research Design & Methods (Cross-Disciplinary) Year 2 Modules: Climate Change & Development (Natural Sciences Pillar) Science, Technology & Development (Natural Sciences Pillar) Globalization & African Development (Social Sciences) Governance, Politics & Development (Social Sciences) Post-Conflict Situations (Social Sciences) Gender & Development (Social Sciences) The UN Architecture: The MDGs & Beyond (Social Sciences) Impact Measurement in Development Aid (Cross-Disciplinary) Fieldwork 2 (Management) MDP Dissertation Entry Requirements, Applications and Closing Date Entry to the program will be based on competitive selection. Applications for admission are accepted from holders of first or upper-second class honors degrees (grade point average 3.5 equivalent) awarded by recognised universities and institutions, and recognised degree awarding bodies (e.g. NCEA, CNAA); holders of other degrees from recognised universities or degree granting institutions who have experienced at least three years of appropriate employment; holders of recognised professional qualifications obtained through examinations who have spent at least four years in study and who, in addition, have been employed for at least two years in the work of their profession; Applicants whose first language is not English must submit evidence of competency in English in a test administered by an institution independent of their own university (e.g. the British Council). [-]

M.Sc. Computer Science – Data Analytics

National University of Ireland Galway College of Engineering & Informatics
Campus Full time 1 year September 2017 Ireland Galway

Globally, there is a reported shortage of data analytics talent, particularly of individuals with the required deep [+]

Big Challenges being addressed by this programme – motivation Globally, there is a reported shortage of data analytics talent, particularly of individuals with the required deep technical and analytical skills. (1) Accenture, Gartner and McKinsey have all identified Data Analytics as one of the fastest growing employment areas in computing and one most likely to make an impact in the future. The Irish Government’s policy is for Ireland to become a leading country in Europe for big data and analytics, which would result in 21,000 potential new employment opportunities in Ireland alone. (1) CNN has listed jobs in this area in their Top 10 best new jobs in America. 1) “Assessing the Demand for Big Data and Analytics Skills”, 2013-2020. Forfás Expert Group on Future Skills Needs, 2014. Programme objectives & purpose This is an advanced programme that provides Computing graduates with advanced knowledge and skills in the emerging growth area of Data Analytics. It includes advanced topics such as large-scale data analytics, information retrieval, data mining, natural language processing, and web data analytics. It also includes foundational modules in topics such as statistics and programming for data analytics. Students on the programme further deepen their knowledge of Data Analytics by working on a project either in conjunction with a research group or with an industry partner. Graduates will be excellently qualified to go into academic research or to pursue careers in industry in a wide range of areas. Opportunities include: - PhD-level research in NUI Galway, elsewhere in Ireland, or abroad - Multinational enterprises, in Galway and elsewhere, that provide services and solutions for analytics and big data; - Multinational enterprises whose businesses depend on analytics and big data technologies; - Innovative indigenous companies and leading-edge start-ups whose provide analytics solutions and products. What’s special about CoEI/National University Ireland Galway in this area: The MSc in Computer Science (Data Analytics) is being delivered by the Information Technology Discipline, in collaboration with the Insight Research Centre and with input from the School of Mathematics, Statistics and Applied Mathematics in NUI Galway - The Information Technology Discipline is NUI Galway’s Computer Science academic discipline, with a 25-year track record of education, research, and industry collaboration - The Insight research centre in NUI Galway is Europe’s largest research centre for Data Analytics - This programme opens the door for graduates for opportunities in PhD level research, careers in industry, or starting new ventures. Programme Structure 90 ECTS programme One full year in duration, beginning September and finishing August Comprises: - Foundational taught modules (20 ECTS) - Advanced taught modules (40 ECTS) - Research/Industry Project (30 ECTS). Programme Content Sample Modules - Statistics - Probability - Advanced Biomaterials - Linear Algebra - Digital Signal Processing - Programming for Data Analytics - Research Project Fundamentals - Open & Linked Data - Information Retrieval - Machine Learning & Data Mining - Learning for Information Retrieval - Tools & Techniques for Large Scale Data Analytics - Data Mining on the Web - Systems Modelling and Simulation - Case Studies in Data Analytics - Embedded Signal Analysis and Processing - Natural Language Processing - Data Visualisation Opportunity for number of Industrial & Research internships: Students enrolled on this programme will have an opportunity to apply for a one-year post-graduation internship in either a related industry or research group in Ireland. Scholarships   A number of scholarships are being made available by the College of Engineering and Informatics to non-EU students registered on these MSc programmes. Each scholarship will be valued at €2,500 and will be awarded to successful candidates based on the submission of a personal statement and CV to the College.    A number of industry sponsored Scholarships will also be available, each to the value of €2,500. Entry Requirements The M.Sc. is suitable for high-performing graduates of Computer Science and closely related degree programmes. Entry to the programme is open to individuals who have at least Second class honours, grade one in a Level 8 degree such as a B.Sc. in Computer Science or a BE in Computer Engineering, or another degree programme that is similar in content to the relevant undergraduate degrees offered by NUI Galway and is from a recognised university or third level college. How to apply Applications are made online via the Postgraduate Applications Centre (PAC). The PAC code for this program is GYE06. [-]

M.Sc. Water Resources Engineering

National University of Ireland Galway College of Engineering & Informatics
Campus Full time 1 year September 2017 Ireland Galway

This programme will provide engineers with the technical competences to provide solutions to water security issues. Core modules will address technical aspects of water [+]

Best Masters in Engineering & Technology in Ireland 2017. Big Challenges being addressed by this programme - Water security is a major concern facing humanity, engineers are the primary professionals tackling this issue. - Annually, more than 3.4 million people die from water related diseases - 1 in 9 people world-wide do not have access to safe and clean drinking water - 1 in 3 people world-wide are affected by water scarcity - Population growth and climate change will place significant stresses on global water resources - Flooding of both urban and rural areas is being exacerbated by climate change Programme objectives & purpose This programme will provide engineers with the technical competences to provide solutions to water security issues. Core modules will address technical aspects of water provision, water resource management and flood mitigation. A primary objective of the programme is to ensure that students have a thorough understanding of modern hydrological modelling tools. The programme has a strong emphasis on the design of hydrological systems, with students working in groups to solve real world problems. Graduates of this programme will be in a position to make significant contributions to solving water resource problems in both industry and academia worldwide. What’s special about CoEI/National University Ireland Galway in this area: - Water engineering has been taught at graduate level at NUIG for over 40 years. During this period students from over 50 countries have graduated from NUIG. - This MSc in Water Resources Engineering is a re-launch of NUI Galway’s International Postgraduate Hydrology Programme established by the late Prof Eamonn Nash. Many of the staff who lectured on the Hydrology Programme contribute to the current programme; so the recognised tradition of world-class teaching in water engineering at NUIG continues. - Currently NUIG staff are involved in large-scale funded research projects in water resources, facilitated by the world-class research facilities at NUIG. Programme Structure This is a 90ECTS programme It is a one full year programme, starting in September and finishing August The programme comprises of the following elements: - taught (core and elective) modules (55 ECTS) - integrated group design project (15 ECTS) - individual research project and thesis (30 ECTS). Programme Content Sample Core Modules: - Hydrology & Water Resources - Hydraulic Modelling - Design of Sustainable Environmental Systems Water Quality Modelling - Water Resources in Developing Countries Applied Field Hydrogeology - Advanced Fluid Mechanics Sample Elective Modules: - Computational Methods in Civil Engineering - Turbomachines & Advanced Fluid Dynamics - Environmental Economics - Engineering Finance - Project Management - Applied Statistics for Engineers - Environmental Impact Assessment - Global Climate Change Opportunity for number of Industrial & Research internships. Students enrolled on this programme will have an opportunity to apply for a one-year post-graduation internship in either a related industry or research group in Ireland. Scholarships A number of scholarships are being made available by the College of Engineering and Informatics to non-EU students registered on these MSc programmes. Each scholarship will be valued at €2,500 and will be awarded to successful candidates based on the submission of a personal statement and CV to the College.    A number of industry sponsored Scholarships will also be available, each to the value of €2,500. The College of Engineering and Informatics will also award the Nash Scholarship in Water Resource Engineering. This is in memory of our deceased colleague, Eamonn Nash who was our Professor of Engineering Hydrology for many years, and was a well-known in the international engineering community. The “Nash cascade” and “NashSutcliffe coefficient” were named after him, and these still feature in scholarly publications. Over four hundred senior hydrologists throughout the world received their post-graduate hydrological education at this University. Entry Requirements: Minimum entry requirement is a Second Class Honours Grade 1 in Civil / Environmental Engineering or equivalent. Applications from candidates from cognate disciplines will be considered on a case-by-case basis. How to apply Applications are made online via the Postgraduate Applications Centre (PAC). The PAC code for this program is GYE23. [-]

ME Biosystems & Food Engineering

UCD College of Engineering and Architecture
Campus Full time 2 years September 2017 Ireland Dublin

Delivered by a School which consistently wins up to €3 million in annual research funding.This Masters will provide graduates from an engineering or mathematical based science background the opportunity to specialise in the application of engineering science... [+]

ME Biosystems & Food Engineering Graduate Taught (level 9 nfq, credits 120) Delivered by a School which consistently wins up to €3 million in annual research funding.This Masters will provide graduates from an engineering or mathematical based science background the opportunity to specialise in the application of engineering science and design to biological materials and systems especially in: Food process engineering Sustainable energy Environmental protection Biosystems Engineers are at the forefront of the search for practical solutions to global problems and this specialisation will lead graduates to a wide variety of employment opportunities with companies focussing on processing of food and other biological materials, environmental protection, waste recycling, sustainable energy and green technologies. The ME Biosystems & Food Engineering involves lectures, tutorials, assignments, laboratory work, a research project and includes a 6-8 month professional work experience internship. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes Career Opportunities This is one of Ireland's most important industries and our graduates have excellent prospects finding employment in: Bioprocess and food companies Environmental protection and waste recycling companies Sustainable energy and green technology companies There are also opportunities to pursue PhD research in UCD and worldwide. Fees, Funding and Scholarships ME Biosystems & Food Engineering (T299) Full Time EU Year 1 - € 7490 nonEU Year 1 - € 23800 ***Fees are subject to change Student Internships This two years masters offers 6-8 months paid professional work experience, the practical skills acquired during this placement will give graduates a competitive advantage when applying for positions upon graduation. Entry Requirements A 3 or 4-year Bachelor's degree with minimum upper second class honours (NFQ level 8) or international equivalence in an engineering degree programme or mathematically-based science subject. Strong results (not less than Grade B or equivalent) in cognate subjects of agricultural and food engineering, biological engineering, fluid mechanics, heat transfer, unit operations. Facilities and Resources The School of Biosystems and Food Engineering has recently invested in excess of €600,000 in state-of-the-art facilities in spectroscopy, hyperspectral chemical imaging and chemometrics. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

Master of Engineering Science in Food Engineering

UCD College of Engineering and Architecture
Campus Full time 1 year September 2017 Ireland Dublin

The Master of Engineering Science in Food Engineering provides a comprehensive coverage of bioprocess and food manufacturing systems engineering. [+]

Best Masters in Engineering & Technology in Ireland 2017. MEngSc Food Engineering FT Graduate Taught (level 9 nfq, credits 90) The Master of Engineering Science in Food Engineering provides a comprehensive coverage of bioprocess and food manufacturing systems engineering. On this Masters you will develop new technical competencies in food and bioprocess engineering, learn how to develop and execute a research plan and acquire skills in the application of leading edge technologies to the agri-food and biotechnology industries, including novel food processing technology, food process automation, risk assessment, computer vision for food quality and food safety. In addition: This Masters is delivered by a highly research intensive School, comprising a European Research Council Fellow and six Marie Curie Fellowships. Two Professors, Sun and O'Donnell, are in the world's top one percent of the most cited scientists in their field. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes The programme will be of particular interest to graduates in Engineering, Science and related disciplines who are interested in food and bioprocess engineering, risk assessment, process development, process control, advanced manufacturing systems and associated environmental issues. Career Opportunities The manufacture of food and drink products is Ireland’s most important indigenous industry with a turnover approaching €24 billion. Almost 50,000 people are directly employed in the food and drink sector with a further 60,000 employed indirectly in all regions of the country. Excellent job prospects are available to graduates in the food, bioprocess, manufacturing and related agencies and industries in Ireland. Graduates have progressed to career opportunities in a broad range of internationally recognised companies including: Glanbia, Kepac, Coca Cola, Guinness, Kerry group, APV, MC O’Sullivan, and ALcontrol Laboratories. Programme structure: The programme consists of 60 credits of modules taken in Semesters 1 and 2. The remaining 30 credits is a year-long minor thesis. At the beginning of the year you will be appointed a Supervisor for your thesis and will agree upon a suitable Thesis title. Throughout the year you will be expected to meet with your supervisor to discuss progress. Fees, Funding and Scholarships MEngSc Food Engineering (X082) Full Time EU fee per year - € 7490 nonEU fee per year - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Entry Requirements A 4-year bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Graduate Profile Owen Murphy, Panelto Foods I chose the MEngSc in Food Engineering at UCD as I needed an update to my education. The good name of UCD as a third level institute in Ireland especially for Food science was a big influencing factor. I have come across many graduates of UCD in my 20 years experience working in food manufacturing and the vast majority of them were successful in their careers. In general I found the modules interesting and relevant. I continue to work in a medium sized food company, Panelto Foods. Since doing my masters I have moved from Technical Manager to Production Manager and do believe that completing the masters was a key element in achieving this move. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

ME Civil, Structural & Environmental Engineering

UCD College of Engineering and Architecture
Campus Full time 2 years September 2017 Ireland Dublin

This programme prepares graduates to work as professional engineers in the broad field of infrastructural design, construction and management. Graduates will satisfy the academic requirements for the title of Chartered Engineer. [+]

ME Civil, Structural & Environmental Engineering Graduate Taught (level 9 nfq, credits 120) This programme prepares graduates to work as professional engineers in the broad field of infrastructural design, construction and management. Graduates will satisfy the academic requirements for the title of Chartered Engineer. You can chose a specialisation either in civil, structural or environmental engineering and as such the range of module options are extensive. The programme is delivered by a culturally diverse group of internationally renowned academic staff. Graduates will satisfy the academic requirements for the title of Chartered Engineer Delivered by a highly research intensive School which is in the top 200 in the QS world subject rankings The programme is delivered by a culturally diverse group of internationally renowned academic staff Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes This programme is suitable for bachelors degree holders in a related Engineering discipline with a minimum upper second class honours (NFQ level 8) or international equivalence. Career Opportunities Graduates from the programme will find employment as engineers in the private sector (e.g. engineering consultancy, engineering design, project management, civil engineering contractors), in the public sector (e.g. local government, higher education sector), and in the nongovernmental sector (e.g., environmental advocacies, NGO’s), or may wish to pursue further qualifications (e.g., PhD, MBA) to become even more specialised. Fees, Funding and Scholarships ME Civil, Structural & Environmental Engineering (T298) Full Time EU fee per year - € 7490 nonEU fee per year - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Student Internships Professional Work Experience (PWE) module is incorporated into the two-year Masters of Engineering Programme and is designed to integrate a student’s academic and career interests with paid practical work experience for a 6-8 month period. The module provides students with the perfect opportunity to gain increased experience and understanding of their chosen field. The practical skills acquired during this placement will give graduates a competitive advantage when applying for positions upon graduation. Entry Requirements A bachelors degree in a related Engineering discipline with a minimum upper second class honours (NFQ level 8) or international equivalence. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Graduate Mark Gilsenan, AECOM I completed this ME programme in September 2012 in order to meet the new minimum education requirement for becoming a chartered engineer. The modules offered as part of the ME programme were both interesting and challenging. One aspect of the ME programme I particularly enjoyed was the research project undertaken in Year Two of the programme. It afforded me the opportunity to conduct extensive research into an area of civil engineering using my own initiative and guided by an academic. I am currently working in Essex, UK in the bridges division of AECOM, a worldwide engineering consultancy, which was advertised through the programme’s social media channels. Having an ME in Civil Engineering was essential in securing this position. I would highly recommend the programme. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

Master of Engineering Science in Structural Engineering

UCD College of Engineering and Architecture
Campus Full time Part time 1 - 2 years September 2017 Ireland Dublin + 1 more

Studying this Masters, you will cover a wide range of topics not traditionally covered in undergraduate degrees; the programme includes specialist modules in structural dynamics, bridge engineering, structural design and professional engineering. [+]

Best Masters in Engineering & Technology in Ireland 2017. MEngSc Structural Engineering FT Graduate Taught (level 9 nfq, credits 90) Studying this Masters, you will cover a wide range of topics not traditionally covered in undergraduate degrees; the programme includes specialist modules in structural dynamics, bridge engineering, structural design and professional engineering. You will also learn how to work in a multidisciplinary setting through combined modules with Architecture students. Structural engineering is a continually evolving profession, and through the third Semester Research Project you will learn how to apply this specialist knowledge to develop new concepts and ideas under the supervision of research active academic staff. This programme will distinguish you as having specialist knowledge in the area of Structural Engineering and provide you with a competitive edge over your peers in the job market. Multidisciplinary learning through collaborative modules with the School of Architecture and industry Advanced taught modules in structural design, conservation and sustainability Application of specialist knowledge to solve problems in new or emerging structural engineering applications This programme is delivered by a School ranked in the top 200 in the QS world subject rankings. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes Part Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. No This programme is suitable for students expecting to graduate with an Honours Degree in Engineering, or those already in employment, who wish to specialise in the area of Structural Engineering. Course Description The MEngSc in Structural Engineering will distinguish you as having specialist knowledge in the area of Structural Engineering and provide you with a competitive edge over your peers in the job market. Modules are taught by a combination of experienced academic staff and senior industry practitioners to provide students with the conceptual and managerial perspectives vital to a successful career in structural engineering. Career Opportunities Our graduates would typically follow careers in structural engineering consultancy, engineering contracting, construction management, project planning both in Ireland and abroad. Employed at Masters levels graduates can expect more responsibility, and faster professional progression, earlier in their careers. Fees, Funding and Scholarships MEngSc Structural Engineering (T279) Full Time EU fee per year - € 7490 nonEU fee per year - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Entry Requirements Entrants to the programme will have an Honours (Level 8) Bachelors Degree in Engineering or equivalent (with a minimum of 2H2 honours level, or equivalent) and the appropriate prior learning. Applicants will be reviewed individually and interviewed where there is any doubt about their suitability for the programme. Academic transcripts and names and contact details for two referees should be provided with your application. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Angelene Dascanio, USA This Masters is fast-paced, challenging and encompasses the skills required for a career in structural engineering. It includes both general and specialty concepts, for example, I took modules in steel and concrete design, but was also able to take a bridge engineering module to fulfil my interest in that particular field. I was initially drawn to the program because it uniquely incorporates some architecture modules into its curriculum. Also, I found the program framework, 60 credits of coursework and 30 credits of a research project, to be very efficient. During the academic year I was able to focus solely on my coursework, meet with my professors for extra help, and study for examinations. Then, during the summer, my efforts were placed on carrying out a research project with the guidance of a professor in my field of interest. As an international student (from America), I felt welcomed by the faculty and fellow classmates. I experienced a smooth transition between the material I learned as an undergraduate and the material presented on this Masters. As a whole, the program effectively prepared me with the essential skills and knowledge needed to succeed in a structural engineering career. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

Master of Engineering Science in Water, Waste & Environmental Engineering

UCD College of Engineering and Architecture
Campus Full time Part time 1 - 2 years September 2017 Ireland Dublin + 1 more

This programme prepares graduates to work in the broad field of environmental protection and management. Students in this programme will gain advanced theoretical and conceptual knowledge and understanding in the area of environmental engineering... [+]

MEngSc Water, Waste & Environmental Engineering FT Graduate Taught (level 9 nfq, credits 90) This programme prepares graduates to work in the broad field of environmental protection and management. Students in this programme will gain advanced theoretical and conceptual knowledge and understanding in the area of environmental engineering on topics such as engineering hydrology, environmental modelling, water and wastewater treatment, solid waste management, and environmental data analysis, among others. The programme is delivered by a School that is highly ranked among leading world universities - top 200 in the QS world subject rankings A culturally diverse group of internationally renowned academic staff deliver the programme. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes Part Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. No This programme is designed for graduates from recognised 4-year (240 ECTS) honours level bachelor of engineering programmes (or equivalent) who wish to specialise in environmental engineering. (Graduates from “first cycle” (3-year, 180 ECTS) engineering programmes should see the related ME in Civil and Environmental Engineering.) Career Opportunities Graduates from the programme will find employment as engineers in the private sector (e.g., engineering consultancy, engineering design, project management, risk assessment,waste management), in the public sector (e.g., environmental protection, regulation, standards development, local government, river basin management), and in the non governmental sector (e.g., environmental advocacies, NGO’s), or may wish to pursue further qualifications (e.g., PhD, MBA) to become even more specialised. Employers of environmental engineers include commercial firms, engineering consultancies, government agencies, and non-governmental organisations, all well known in Ireland and many with global operations. Some of these include: • RPS Group • White Young Green • Nicholas O’Dwyer • Atkins • Greenstar • Arup • McKinsey and Company • Mazars • Environmental Protection Agency • Local Authorities • Engineers Without Borders • Engineers Against Poverty • Friends of the Earth Fees, Funding and Scholarships MEngSc Water, Waste & Environmental Engineering (T277) Full Time EU fee per year - € 7490 nonEU fee per year - € 23800 MEngSc Water, Waste & Environmental Engineering (T278) Part Time EU fee per year - € 3830 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Entry Requirements Applicants need to hold a recognised bachelor’s degree (honours) in engineering (minimum 4-yr, 240 ECTS), preferably in civil engineering or environmental engineering, or equivalent with high academic grades, i.e. a minimum 2H1 Honours level or its equivalent (your transcript should include grades for each subject taken); names and contact details of two referees who can assess your intellectual ability, maturity and motivation. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Graduate Karl Corcoran, OCSC Consulting Engineers. I chose the MEngSc Water, Waste & Environmental Engineering because it was the only programme of this nature available in the Republic of Ireland. A mixture of lectures and workshops for several modules also allowed me to gain hands-on experience of some of the computer packages used in the fields of water, waste and environmental engineering. I am currently working with OCSC Consulting Engineers. The position I was hired for, and the main sectors that I am currently working in, were those covered in the MEngSc and having completed this masters certainly helped me to obtain employment in this field. I would highly recommend this programme. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

Master of Architectural Science - Sustainable Building Design & Performance

UCD College of Engineering and Architecture
Campus Full time 1 year September 2017 Ireland Dublin

The Masters in Sustainable Building Design & Performance taught masters programme is for those seeking to develop a career or hoping to undertake further studies in sustainable building analysis and design. [+]

Best Masters in Engineering & Technology in Ireland 2017. MArchSc Sustainable Building Design & Performance FT Graduate Taught (level 9 nfq, credits 90) The Masters in Sustainable Building Design & Performance taught masters programme is for those seeking to develop a career or hoping to undertake further studies in sustainable building analysis and design. It supports students to define themselves within the fields of sustainability, architecture, energy, environment and health. Students are encouraged and supported in the pursuit of a broad range of inter-related issues through active enquiry and autonomous investigation. The programme provides a learning environment within which each student is encouraged and can make a unique and individual contribution as well as being part of a team. It is delivered through lectures, seminars, tutorials and individual and group project work, all supported through contact time in class, individual supervisory sessions and online course content. The programme is designed to place value on each individual and their contribution to the group, supporting their development through an inclusive, exploratory and encouraging learning environment. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes Career Opportunities Graduates of the programme will be well positioned and will have a distinct advantage in securing roles in defining the sustainable future of the built environment. Students who have completed graduate and postgraduate programmes with the UCD School of Architecture, Planning and Environmental Policy and the UCD Energy Research Group have gone on to work in world-renowned consultancies, practices, research agencies and universities. The programme is also an introductory vehicle for those wishing to pursue further research at research masters or PhD level both at UCD and internationally. Fees, Funding and Scholarships MArchSc Sustainable Building Design & Performance (T281) Full Time EU fee per year - € 7490 va nonEU fee per year - € 23800 va ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Entry Requirements A 4-year bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Applicants are required to submit their CV as part of their application documentation. Testimonial Graduate Profile Elena Nikolova This Masters offered me everything that I am professionally interested in and everything that I was looking to learn in order to progress my career. It is a very interesting and challenging, diverse and up-to-date Master’s that offers great opportunities to expand your knowledge and grow professionally. The experience of undertaking it became even greater thanks to the devoted teachers I’ve had and the many friends from all over the world I made. Another advantage is that I had the chance to explore the amazing natural wonders of Ireland and meet lovely local people. Facilities and Resources The programme is delivered by the UCD School of Architecture, Planning & Environmental Policy and supported by the UCD Built Environment Laboratory, offering excellent laboratory resources and supported by technical expertise. UCD hosts excellent paper-based and electronic library resources in the areas of architecture and sustainable design. The School of Architecture, Planning & Environmental Policy offers dedicated studio space for its students, a dedicated architecture library and map room, access to fully equipped computer facilities,and a state-of-the-art IT infrastructure, a building laboratory space with a wide range of equipment and access to monitoring and simulation equipment in the Built Environment Laboratory. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

Master of Engineering Science in Materials Science & Engineering

UCD College of Engineering and Architecture
Campus Full time 1 year September 2017 Ireland Dublin

The MEngSc in Materials Science and Engineering provides engineers with a specialist education and training in the area of metals, ceramics, polymers and composites for industrial engineering applications from biomedical device manufacture to future energy solutions. [+]

MEngSc Materials Science & Engineering FT Graduate Taught (level 9 nfq, credits 90) The MEngSc in Materials Science and Engineering provides engineers with a specialist education and training in the area of metals, ceramics, polymers and composites for industrial engineering applications from biomedical device manufacture to future energy solutions. This programme is delivered by a School with a long history of innovation. This school attracts approximately €5m in research funding annually. Focus on the use of materials in engineering systems. Advanced integrated theoretical, conceptual and practical knowledge. Technical research project in collaboration with world leading research groups. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes Engineering students who have successfully completed a 3-year BSc (Engineering Science) ‘First Cycle’ honours degree at UCD or any other academic institution and who have achieved a good Second Class Honours standard (e.g. a UCD GPA of 2.80 or greater). Those admitted on this basis will be required to complete 120 new ECTS credits over two academic years. This structure includes a Long (30 credit) or Short (10 credit) Professional Engineering Work Placement. Engineering or science graduates from any cognate discipline who are seeking to specialise in materials science and engineering at postgraduate level. Course Description Materials Scientists and Engineers are at the centre of virtually every area of technology from optoelectronics to space materials and from automotive and aeromotive manufacturing to biomedical devices. Graduates from this programme will be fully qualified professional engineers, capable of working anywhere in the world at an advanced technical level or as a professional engineering manager. Graduates will also have specialist training in underlying scientific fundamentals and practical materials handling and analysis techniques that will make them attractive to either potential employers or equip them for further study at advanced postgraduate level such as PhD studies in Ireland or across the world. Career Opportunities If you are a graduate of the MEngSc Materials Science & Engineering programme you can look forward to limitless employment opportunities in a substantive array of industries. Most companies worldwide employ materials professionals and examples where UCD materials graduates now work are: General Electric or Rolls Royce (Aerospace), Astrium (Space), Stryker or Boston Scientific (Biomedical) or Siemens (Energy). Fees, Funding and Scholarships MEngSc Materials Science and Engineering (T286) Full Time EU fee per year - € 7490 nonEU fee per year - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Entry Requirements A 4-year bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering, Science or Technology programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Student Profile Richard Ruane. 'I chose the one year masters in Materials Science and Engineering at UCD as this was without doubt the only course of its type in Ireland, not to mention UCD’s School of Mechanical and Materials Engineering long established reputation as the finest school of engineering in Ireland. My background was initially in chemistry, having obtained an undergraduate degree in Chemical and Pharmaceutical Science from DCU. However, I decided to shift towards materials science, an incredibly broad discipline in itself, as it has been and will continue to be the field which contributes most to the advancement of technology. In this course you will study anything from biomedical applications of titanium alloys to the materials science behind nanomaterials like graphene. Wherever your interests lie, this program will give you a broad yet detailed understanding of materials science and its engineering applications. I highly recommend this course to anyone who has an interest in becoming a materials scientist or engineer. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

ME Materials Science & Engineering

UCD College of Engineering and Architecture
Campus Full time 2 years September 2017 Ireland Dublin

The ME in Materials Science and Engineering provides engineers with a specialist education and training in the area of metals, ceramics, polymers and composites for industrial engineering applications from biomedical device manufacture to future energy solutions. [+]

Best Masters in Engineering & Technology in Ireland 2017. ME Materials Science & Engineering Graduate Taught (level 9 nfq, credits 120) The ME in Materials Science and Engineering provides engineers with a specialist education and training in the area of metals, ceramics, polymers and composites for industrial engineering applications from biomedical device manufacture to future energy solutions. This Masters is accredited by both Engineers Ireland and the IOM3 (UK). Graduates from this programme will be fully qualified professional engineers, capable of working anywhere in the world at an advanced technical level. Focus on real-world materials used for the manufacture of advanced engineered components and systems such as biomedical implants. Integrated theoretical, conceptual and practical knowledge. Technical research project in collaboration with world leading research groups and researchers. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes A bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Engineering or science graduates from any cognate discipline who are seeking to specialise in materials science and engineering at postgraduate level Course Description Materials Scientists and Engineers are at the centre of virtually every area of technology from optoelectronics to space materials and from automotive and aeromotive manufacturing to biomedical devices. Graduates from this programme will be fully qualified professional engineers, capable of working anywhere in the world at an advanced technical level or as a professional engineering manager. Graduates will also have specialist training in underlying scientific fundamentals and practical materials handling and analysis techniques that will make them attractive to either potential employers or equip them for further study at advanced postgraduate level such as PhD studies in Ireland or across the world. Career Opportunities If you are a graduate of the ME Materials Science & Engineering programme you can look forward to limitless employment opportunities in a substantive array of industries. Most companies worldwide employ materials professionals. A number of UCD materials graduates have been employed by companies such as General Electric or Rolls Royce (Aerospace), Astrium (Space), Stryker, Boston Scientific (Biomedical) or Siemens (Energy). Fees, Funding and Scholarships ME Materials Science & Engineering (T275) Full Time EU Year 1 - € 7490 EU Year 2** - € 7490 nonEU Year 1 - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Student Internships The Professional Work Experience (PWE) module is incorporated into the two-year Masters of Engineering Programme and is designed to integrate a student’s academic and career interests with paid practical work experience for a 6-8 month period. The module provides students with the perfect opportunity to gain increased experience and understanding of their chosen field, assess where their strengths and weaknesses lie and maximise their knowledge of the available career possibilities. The practical skills acquired during this placement will give graduates a competitive advantage when applying for positions upon graduation. Entry Requirements A bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Graduate Profile Gavin McGlynn Graduate I chose this course as I was interested in working with the smallest building blocks in engineering. Once in the course I became fascinated by CSI-like investigations used to understand a material and how to improve its properties. My work placement brought me to the UK to work with polycrystalline diamond composites and was so fascinating that I did my research project with the company.Life in UCD also has the potential to be very rich. As well as studying, I had the chance to join and run many clubs and societies, experienced other cultures, picked up new sports and made friends from all areas of this diverse college. The course itself covered a broad range of processes and applications but was also flexible and allowed me to delve deeper into areas of interest to me such as medical devices, composites and nano-materials. This flexibility allowed me to work with people from different backgrounds which gave me new perspectives on how to tackle problems. The skills I have gained during this degree have given me a great grounding, allowing me to work in almost any field. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

Master of Engineering Science in Engineering Management

UCD College of Engineering and Architecture
Campus Full time 1 year September 2017 Ireland Dublin

This Masters is about developing the knowledge and skills needed by graduate engineers in order to pursue successful careers as engineering managers in a wide range of international industries and sectors. [+]

MEngSc Engineering Management FT Graduate Taught (level 9 nfq, credits 90) This Masters is about developing the knowledge and skills needed by graduate engineers in order to pursue successful careers as engineering managers in a wide range of international industries and sectors. Designed around five key engineering management themes (Operations & Supply Chain Excellence, Analytics & "Big Data", Business & Management, Innovation & Entrepreneurship, Industry Applications), the programme also enhances participants existing technical skills through the provision of advanced technical option modules to develop their undergraduate disciplinary knowledge base. Designed around five core themes, the programme addresses the principle engineering management challenges involved in the design, operations and management of international technology companies This programme is delivered by the School of Mechanical and Materials Engineering which has 50 years' experience in teaching Engineering Management. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes This programme is suitable for engineering students of all disciplines. Career Opportunities Career opportunities are very broad as the MEngSc Engineering Management students are not narrow technical specialists but “T-shaped” individuals combining specialist skills with a broad understanding of the business environment. This skill set is invaluable when embarking upon careers in many sectors including energy, consumer goods, medical technology, management consulting, ICT and automotive. Prospective employers include Accenture, SAP and Tesla Motors to name but a few. Fees, Funding and Scholarships MEngSc Engineering Management (T288) Full Time EU fee per year - € 7490 nonEU fee per year - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Entry Requirements A 4-year bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. A detailed explanation of your interest in the programme must be provided. Testimonial Graduate Profile Xuanang Lv, Assistant Technical Manager, Kerry Group. Choosing Ireland as the location for my postgraduate studies meant I could use my English and have the opportunity to interact with people from all over the world. I chose UCD due to its top university ranking in Technology and Science and because its business graduate school is fantastic. I particularly liked the modern UCD campus, however the highlight of my year at UCD was when my team won a case study competition sponsored by Deloitte and when I competed in the MIT Operation Simulation contest with two other Irish classmates. I have now secured an operation position in Shanghai as part of the Kerry Group graduate programme. The masters perfectly prepared me for my chosen career path. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

ME Engineering with Business

UCD College of Engineering and Architecture
Campus Full time 2 years September 2017 Ireland Dublin

The ME in Engineering with Business offers a unique opportunity for engineering students to complement their technical expertise with a deep understanding of the business and management aspects of engineering practice such as operations, human resources, marketing and strategy. [+]

Best Masters in Engineering & Technology in Ireland 2017. ME Engineering with Business Graduate Taught (level 9 nfq, credits 120) The ME in Engineering with Business offers a unique opportunity for engineering students to complement their technical expertise with a deep understanding of the business and management aspects of engineering practice such as operations, human resources, marketing and strategy. As a result graduates will develop a distinctively cross disciplinary perspective, which is essential to a successful career in business. This programme is delivered in conjunction with the UCD Michael Smurfit Graduate Business School, Ireland's leading business school. This programme was voted GradIreland Engineering Postgraduate Course of the Year 2015 and is the only business-oriented masters programme accredited by Engineers Ireland for Chatered Engineering Status. On this programme you will be able to build on your core technical skills, while also gaining a unique set of competencies in business and technology management. As a result you will develop a cross disciplinary perspective which is essential to a successful career in business. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes The ME (Engineering with Business) is for engineering graduates from any discipline who plan to practice engineering in a business context. Course Description Professional engineers need to understand the environment in which they practice. As their career progresses, engineers are increasingly involved in functions such as finance, quality, marketing and strategy. The ME provides grounding in these areas, to give graduates an understanding of the business implications of engineering decisions. The programme focusses on the practical application of knowledge, which culminates in the 6 month work placement and the industry oriented research project in the final year. Career Opportunities The ME in Engineering with Business is designed to produce fully qualified engineers who have a particular interest in and understanding of the business context within which engineers usually operate. It was conceived to address the perceived lack of ‘industry-ready’ engineers coming out of third level education. Career opportunities are very broad as the ME degree positions the student not as a narrow technical specialist but as a ‘T-shaped’ individual, combining specialist skills with a broad understanding of the business environment. In addition to careers within their technical specialisations graduates can consider careers in commercial roles, management consulting, the financial sector or IT. Previous employers of alumni include: Accenture, PJ Walls, PM Group, MSD Carlow, Abbvie, Jaguar UK, RPS Consulting, Intel, Deloitte and Boston Scientific. Fees, Funding and Scholarships ME Engineering with Business (T166) Full Time EU Year 1 - € 7490 EU Year 2** - € 7490 nonEU Year 1 - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Student Internships A six month work placement where student’s technical and business knowledge can be applied and developed in a dynamic real-world setting. These placements are designed to expose students to all aspects of a technology business, while allowing them to develop their personal and personal and professional skills. The placement is followed by a four month Master’s research project, including research methods training. There is the potential for the project to be a follow-on to the work placement, allowing an ongoing in-depth study of the industry and the organisation. Entry Requirements A 3-year bachelors degree with a first class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 7.0 (no band less than 6.5 in each element), or equivalent. Testimonial Aislinn Murray, Boston Scientific I am delighted I chose this masters at UCD. Over the course of my studies I completed an eight month placement, a thesis related to industry and a wide range of modules. The course offers insights into many businesses across a range of verticals in Ireland and abroad. I did my work placement in Boston Scientific, a worldwide medical device leader. This placement also resulted in me doing my thesis with Boston Scientific on a project which I loved. This masters qualified me with the necessary skills to kick start my career. I now work for Boston Scientific as an Engineer in Process Development. The wide range of modules, from management to technology has made the transition from education to the working world very comfortable. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

ME Energy Systems Engineering

UCD College of Engineering and Architecture
Campus Full time 2 years September 2017 Ireland Dublin

The ME in Energy Systems Engineering prepares graduates to meet the engineering, economic and environmental challenges facing the energy systems of developed and developing countries. [+]

ME Energy Systems Engineering Graduate Taught (level 9 nfq, credits 120) The ME in Energy Systems Engineering prepares graduates to meet the engineering, economic and environmental challenges facing the energy systems of developed and developing countries. Graduates of this programme gain a comprehensive understanding of the complex multi-disciplinary and often conflicting issues that arise in the search for effective solutions. Graduates will also be capable of working anywhere in the world at an advanced technical level or as a professional engineering manager. Participants will receive a broad education which is built on strong theoretical foundations but retains a strong focus on real-world applications. This 2 year Masters includes a 6-8 professional work experience internship. Graduates will gain a strong understanding of the complex multi-disciplinary and often conflicting issues that arise in the search for effective solutions to the energy challenges. This Masters is professionally accredited and teaching is provided by academic experts drawn from all five UCD Schools of Engineering and from other disciplines. Candidates who have already completed a 4-year professional engineering bachelor degree may be eligible for recognition of prior learning, enabling them to complete this programme over 12 months. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes The ME (Energy Systems) is designed as a “Second Cycle” (level 9) degree programme for graduates who have already completed a “First Cycle” honours (level 8) engineering degree of at least 3 years duration. It is aimed at those who require a recognised professional qualification in Energy Systems Engineering. Graduates with an honours degree in a mathematically-based science subject area may be eligible to take a tailored 2-year version of the programme, thereby enabling them to become professionally qualified engineers. Course Description The ME programme prepares engineers for work in designing and developing future energy systems and aims to deepen understanding of the interactions between these systems and the environment and energy policy, taking account of economic factors. The scope of the programme includes analysis of global energy systems, use of finite natural resources and the impact on climate. It focuses on renewable and other energy sources such as wind, wave, nuclear and solar power and on the conversion, storage and transmission by electrical and other means. The programme will also address the efficient use of energy in buildings, transport and industrial processes, together with the study of other topics such as carbon sequestration. Career Opportunities Participants of this ME Energy Systems programme will be equipped with the skill set and knowledge vital for crucial roles in research, design and development in companies in the energy sector. Graduates from this programme have obtained jobs in a wide variety of organisations in Ireland and further afield, the majority in the energy sector. Perspective employers include: ESB International (Dublin), Commission for Energy Regulation (Dublin), Airport Authority, Intel Ireland Limited, Dalkia Ltd (Dublin), Accenture (Dublin), Dimplex Renewables (Irl), Enercon GmbH (Ireland and Germany), Zenith Technologies (Cork), ConocoPhillips (Cork), Imtech (UK), MCS Kenny (UK), Sellafield Ltd (UK), Schletter UK Ltd, Schwenk Zement (Germany), KBR (UK), Capula Ltd (UK), Eclareon (Spain), Dynapower LLC (USA), Sea Breeze Power Corp (Canada), KBR (Australia), and Independent Market Operator (Perth, Australia). Significant numbers of graduates have also decided to pursue further study to PhD level, at UCD and elsewhere. Fees, Funding and Scholarships ME Energy Systems (T164) Full Time EU fee per year - € 7490 nonEU fee per year - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Student Internships The Professional Work Experience (PWE) module is incorporated into the two-year Masters of Engineering Programme and is designed to integrate a student’s academic and career interests with paid practical work experience for a 6-8 month period. The module provides students with the perfect opportunity to gain increased experience and understanding of their chosen field, assess where their strengths and weaknesses lie and maximise their knowledge of the available career possibilities. The practical skills acquired during this placement will give graduates a competitive advantage when applying for positions upon graduation. Professional Accreditation The UCD ME (Energy Systems) degree programme is fully accredited at Masters level by Engineers Ireland and the programme has been awarded the EUR-ACE® Label as a Second Cycle Accredited European Engineering Programme under the EUR-ACE Framework of Standards for Accreditation of Engineering Programmes. Entry Requirements A bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Graduate Profile Gavin Hickey, Energia. I chose UCD for its superior facilities, innovative research and academic credentials. This Masters is well suited to anyone looking to enhance their knowledge of the Energy sector an exciting area of massive economic growth and change. The course takes a detailed look at the current energy system and the potential steps that can be taken to reduce its impact on the environment. A wide range of modules are offered which looks at everything from energy economics and policy, to power systems operation, all of which provide an in-depth understanding of the energy market. An understanding of these areas is an extremely attractive quality to employers both in Ireland and abroad. An additional benefit of this course is the 6-8 month internship organised by UCD which gave me the opportunity to work in Energia. During this time, I was able to apply my technical knowledge in a practical setting and enhance my engineering and professional skills. Since finishing the Master’s, I have taken up a full-time position with Energia, the majority of my classmates have also secured jobs. I would strongly recommend the Energy Systems Masters to anybody looking to pursue a career in the energy sector. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]

ME Electrical Energy Engineering

UCD College of Engineering and Architecture
Campus Full time 2 years September 2017 Ireland Dublin

The ME Electrical Energy Engineering programme is taught by world-renowned academics from the ERC. The professionally accredited programme addresses the challenge of transitioning towards sustainable power systems, integrating diverse generation and demand-side technologies while maintaining stable and economic operation. [+]

Best Masters in Engineering & Technology in Ireland 2017. ME Electrical Energy Engineering Graduate Taught (level 9 nfq, credits 120) The ME Electrical Energy Engineering programme is taught by world-renowned academics from the ERC. The professionally accredited programme addresses the challenge of transitioning towards sustainable power systems, integrating diverse generation and demand-side technologies while maintaining stable and economic operation. It provides strong training in various aspects of electrical engineering and enhances this through a major research project and professional work experience. A wide range of core and optional modules delivered by engineers with international reputations, including academic staff from the world-leading Electricity Research Centre in grid integration of renewables. Delivered by a highly research active school holding a position of 101-150 in the QS World Subject Rankings. This programme will provide you with a strong educational foundation in power systems and power electronics analysis & design, renewable energy sources and smart grid applications. This programme will provide you with an engineering qualification fully compliant with the Masters level accreditation requirements of Engineers Ireland. Who should apply? Full Time option suitable for: Domestic(EEA) applicants: Yes International (Non EEA) applicants currently residing outside of the EEA Region. Yes The ME programme is targeted at mathematically strong engineering students who are interested in power systems analysis and renewables integration, and who are seeking a professional career in the power system and smart grid sectors. Course Description The 2 year programme comprises subject areas relating to power system analysis & design, power electronics applications & design, sustainable power systems, smart grid communication architectures and electricity market operations, in addition to a major research project and a professional work experience opportunity. Career Opportunities By completing the ME Electrical Engineering programme, you will become a graduate with power systems expertise, whose rare skills will be attractive to a wide variety of technical and managerial roles in the electrical utility and smart grid sectors on an international scale, e.g. Alstom, ABB, EPRI, EirGrid, ESB, GE, Siemens. The ME programme also provides an excellent starting point for those aiming for a PhD programme and a research career within a university or specialised research institution. Fees, Funding and Scholarships ME Electrical Energy Engineering (T274) Full Time EU Year 1 - € 7490 EU Year 2** - € 7490 nonEU Year 1 - € 23800 ***Fees are subject to change Tuition fee information is available on the UCD Fees website. Please note that UCD offers a number of graduate scholarships for full-time, self-funding international students, holding an offer of a place on a UCD graduate degree programme. For further information please see International Scholarships. Student Internships The Professional Work Experience (PWE) module is incorporated into the two-year Masters of Engineering Programme and is designed to integrate a student’s academic and career interests with paid practical work experience for a 6-8 month period. The module provides students with the perfect opportunity to gain increased experience and understanding of their chosen field, assess where their strengths and weaknesses lie and maximise their knowledge of the available career possibilities. The practical skills acquired during this placement will give graduates a competitive advantage when applying for positions upon graduation. Entry Requirements A 4-year bachelors degree with a minimum upper second class honours (NFQ level 8) or international equivalence in a relevant Engineering programme. Applicants whose first language is not English must also demonstrate English language proficiency of IELTS 6.5 (no band less than 6.0 in each element), or equivalent. Testimonial Graduate Profile Ruth Galvin, ESB International Having completed my Bachelor of Engineering Science in UCD, the Electrical Energy Engineering Masters in UCD offered a natural progression to deepen my knowledge and skills for the Electrical Energy and Power Systems sector. For me, the Masters program struck the perfect balance between taught modules, self directed research, and an internship program. Within the two year course I got the opportunity to undertake a six month Internship with Arup Consulting Engineers in Dublin, which provided invaluable work place experience and facilitated networking in the industry. The thesis is both a challenging and rewarding aspect of the program and provided me with the scope to tackle a very topical issue in the Power Electronics field, and work with members of the ERC. Having access to the Opal RT Real Time Digital Simulator in the ERC was a real plus when it came to testing my project design. The Masters program provided a platform for a choice of graduate positions for 2015 graduates. *Courses will remain open until such time as all places have been filled, therefore early application is advised [-]