Part time Master's Degree in Engineering & Technology in Canada

View all Part time Master Programs in Engineering & Technology in Canada 2017

Engineering & Technology

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Studies in engineering and technology prepare you for the technologically oriented workforce of today.

Members of the workforce with engineering and technology training are sought out by many industries including medical research and computer software development.

 

Canada is the best country to pursue your higher education if you are an interactive person. Almost every ethnic group is represented in Canada thus it's a multicultural society. Language barrier is not an issue to foreign students as Canada is considered the world's leader in language training.

Start Today Best Part time Masters Programs in Engineering & Technology in Canada 2017

Read More

Etna Software Architect Master Of Online App Developer

IONISx
Online Part time 3 years Open Enrollment Canada Canada Online

Turn innovative ideas into concrete solutions is the key to the digital economy: Become an expert in software programming and applications. [+]

Best Part time Masters in Engineering & Technology in Canada. Turn innovative ideas into concrete solutions is the key to the digital economy: Become an expert in software programming and applications. WHY THIS COMPUTER MASTERS ONLINE ETNA? You want to find a job in the computer after upgrading your skills, career reorientation, or as part of an initial training? The ETNA program allows you to access programs from a computer school recognized total flexibility. Fully online, this course is for the candidate (s) who have professional and personal life in charge or who want to accelerate their learning. TRADES A gateway to the digital professions in high demand: software architect Project Manager Application Developer computer applications engineer IT consultant SKILLS & GOALS Master new skills with our project-based teaching Know and use the most used technologies in the market (JAVA, .NET ...). Adapt to technological change. Master the different development technologies to be able to fit quickly into a team and become project manager. Integrating a quality approach. CONDITIONS OF ADMISSION Bac + 2 for the first year, and +3 for the third year. THIS COURSE IS AVAILABLE For students with a BAC + 2 level who want to target the graduation. Professionals, for which a device VAP (Validation of Acquired Partial) validates the gains they already own. For applicants seeking employment or those who wish to resume their careers. TRAINING DURATION structured curriculum: Two 3-year revenue per year: October and March RATE Student price: € 2500 TTC / level business price: 3 000 € / Level RNCP TITLE 9874 Software Architect-Developer (honest) Application ETNA Since 2004, the School of Applied Digital Technologies shape every future year "application developers software architects" and "network systems architects and security", with a placement rate of 100% business. [-]

Specialized Graduate Studies In Engineering (project Type)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Lévis

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and to increase their skills in various fields of engineering and project management with graduate courses. Enable professional development short to candidates with an undergraduate degree to complete their training and to increase their skills in different areas of engineering with graduate courses. More specifically, the student should, on completion of its curriculum: have gained extensive knowledge in one or more specialties related to engineering; be able to apply this knowledge to issues and situations or various projects related to its specialization. have developed the necessary skills and abilities to participation in industrial innovation projects. [-]

Specialized Graduate Studies In Engineering (model Course)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski

The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. [+]

Best Part time Masters in Engineering & Technology in Canada. The Graduate Diploma in Engineering enhances its expertise in various fields of engineering and project management. The student has the opportunity to deepen their knowledge in one of the six levels of the program: design and computer-aided manufacturing; electrical engineering; mechanical Engineering; wind engineering; Electromechanical Engineering; signal processing and telecommunications. It allows to integrate and apply the knowledge gained in the course as part of a project of innovation, development, technology transfer or intervention in business. paths Specialized graduate studies in engineering (project type) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 2 courses (6 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Application Project (9 credits) Total: 30 credits Specialized graduate studies in engineering (model course) This program is structured as follows: Basic knowledge of engineering: 3 courses (9 credits) project management knowledge base: 3 courses (9 credits) Specialization in engineering: 2 courses (6 credits), depending on the concentration synthesis and integration activities: Technical Project (3 credits) Total: 30 credits Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. OBJECTIVES Allow candidates with a scientific first cycle degree to complete their training and to increase their skills in various fields of engineering and project management with graduate courses. More specifically, the student should, on completion of its study program: have gained extensive knowledge in one or more specialties related to engineering and project management; be able to apply this knowledge to issues and situations or various projects related to its specialization. have developed the skills and abilities necessary for the conduct of industrial innovation projects or from the industrial sector in the field of his specialization. [-]

MSc In Oceanography

Université du Québec à Rimouski UQAR
Campus 6 months September 2017 Canada Lévis

Fluency in oceanography as scientists able to understand the dynamics of the marine system of a multidisciplinary and comprehensive manner. [+]

Fluency in oceanography as scientists able to understand the dynamics of the marine system of a multidisciplinary and comprehensive manner. It provides an informed knowledge of the marine environment, its resources, technical study and exploitation, pollution problems that we encounter and are appropriate intervention methods. The research project and the courses help to deepen their knowledge in one of four areas of specialization: chemical oceanography; biological oceanography; geological oceanography; Physical Oceanography. Program Structure Fluency in oceanography allows for a research project (27 credits memory) to deepen his knowledge in a specialty area of ​​science of the sea. From their first term, students participate in an oceanographic expedition on the research ship Coriolis II in the Experimental Oceanography course. The program also includes a general oceanography courses and two elective courses whose topics vary according to student research project. This program also helps develop the skills required for the pursuit of doctoral studies. Research areas physical oceanography Physicists are interested in the movement of water depending on various factors, like the tide, winds, changes in freshwater flow, as well as changes in space and time. Their research particularly affect: Waves of training; the salinity gradients and density; temperature variations; the energy exchange between the air and the sea; turbulent areas of training; related phenomena between the ocean and the temperature (global climate change, El Niño, hurricanes and typhoons); etc. chemical oceanography Chemists are interested in chemical processes in water and marine sediments. Their research particularly affect: the origins and fate of the chemical constituents of ocean water; chemical reactions that occur in the marine environment; the effects of contaminants (organic or not) and their distribution; gas exchange between the atmosphere and the ocean; etc. biological oceanography Biologists are interested organizations and living microorganisms in the marine environment, such as plankton, algae, crustaceans, molluscs, fish and mammals. Their research particularly affect: trophic relationships between these organizations and the factors that may disrupt this relationship, such as climate change and pollution; interactions and the evolution of species based on physical, chemical and geological parameters of the medium; the influence of anthropogenic and natural disturbances on biodiversity; Aquaculture (physiology, genetics, development, etc.); fish farming systems; etc. geological oceanography Geologists are interested in the evolution of the seafloor, that is to say the nature of the sediments, the mechanisms of their implementation and the history of their accumulation. Their research particularly affect: the formation of ocean basins, mountain ranges, trenches, submarine volcanoes; how sediment is transported, lifted and distributed to form islands and continents; paleoclimatic and paleoenvironmental the reconstitution from the study of the mineralogical properties, geochemical and / or magnetic sediment; etc. Projects recruitment studies Teachers ISMER regularly appear calls for applications for projects Masters or PhD in oceanography. Applicants may also contact the teachers to know the coaching opportunities. The marine sciences, an axis of excellence in research at UQAR From birth of the Université du Québec à Rimouski, understanding of the marine environment has become a niche studies and axis excellence must search. UQAR today brings an extraordinary concentration of researchers with expertise across a wide range of issues affecting the science of the sea. ISMER is a leader in areas such as climate change at different latitudes, the effects of ultraviolet radiation on the first links in the food chain or the impact of contaminants on coastal ecosystems. The marine acoustics, aquaculture, population dynamics and sediment transport are also themes that can rely on solid expertise. Employment Opportunities Every year several job opportunities available for graduates in oceanography, which depend on the disciplinary training (biological oceanography, chemical, geological or physical). Since a large number of pollutants, natural or anthropogenic, end up in the ocean, environmentalists from around the world begin to be interested in ocean affairs. The need for specialists who understand not only the interdependence of the ocean, urbanization and industrialization in constant growth, but also the potential dangers of maritime accidents continues to strengthen. Public sector In Canada, the major employer of graduates in oceanography is the federal government, specifically the Department of Fisheries and Oceans and Natural Resources. Other government departments and agencies as well as universities employ oceanographers to teach and conduct research. Private sector Employment in the private sector largely affect studies and environmental assessment. Some large companies employ their own marine scientists while others prefer to hire consultants. Fisheries and aquaculture The fisheries research require knowledge of almost all aspects of oceanography to conduct population assessment and modeling of the dynamics of fish populations. The rapid expansion of aquaculture has led to a demand for a number of specialists, including nutrition and fish disease control. OBJECTIVES This program aims to train scientists capable of conducting oceanographic research, that is to say, to study the phenomena of the sea from a multidisciplinary and comprehensive manner. At the end of their oceanography training program, students will have acquired sufficient knowledge of the marine environment, its resources, study techniques and operating in that environment pollution problems and intervention methods appropriate. The research project and courses taken in the program allow the student to acquire multidisciplinary knowledge in oceanography and deepen their knowledge in an area of ​​specialization. [-]

Master Of Engineering (type Course With Project)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Rimouski

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. [+]

Best Part time Masters in Engineering & Technology in Canada. The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance and management of industrial systems Telecommunications and information processing photonics Remote sensing Signal Processing Telecommunication and satellite communication and wireless Etc. Employment Opportunities Graduates senior engineering graduate programs occupy positions in several industry sectors such as: electronic; instrumentation and control; telecommunications; aerospace; design; manufacturing; automating; production engineering; energy; aviation; pulp and paper; metal processing; transport; Computer Engineering; wind engineering; marine engineering; R and D. The main functions for Graduates are: project manager; Director of R & D; researcher or associate researcher; systems engineer; project engineer; systems designer; responsible for experimentation; product development engineer; PhD student (for master's degrees). OBJECTIVES Contribute to increasing the scientific and technical knowledge in engineering, introduction to research and technological innovation and form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science . More specifically, the student should, on completion of its study program: having acquired more knowledge in some of the science and technology related to engineering; be able to apply this knowledge to issues, situations or various projects related to its specialization; demonstrate a critical able to propose and evaluate solutions to specific engineering problems; be able to conduct an engineering project in its area of ​​specialization; demonstrating that it is able to communicate orally and in writing in a clear and consistent manner, the results of scientific research work. The memory without profile (type course) promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. [-]

Master Of Engineering (with Memory)

Université du Québec à Rimouski UQAR
Campus September 2017 Canada Lévis

The master of engineering is to improve scientific and technical knowledge in engineering, [+]

The master of engineering is to improve scientific and technical knowledge in engineering, to initiate research and technological innovation and to form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science. paths Master of Engineering, course type profile with project The Master of Engineering, project course type memory without profile promotes the development of vocational training component of the candidate by the deepening of knowledge and the acquisition of a specialty. Master of Engineering, with profile memory The Master of Engineering, with profile memory favors the development of a research component by deepening knowledge in a field of specialization. This pathway also helps develop the skills required for the pursuit of doctoral studies. Targeted audience This program is open to candidates with training in the field of engineering who wish to deepen their scientific and technical knowledge in engineering. Candidates holding training in fundamental or applied sciences are also eligible. However, they will be assessed a probationary tuition undergraduate engineering. Research areas The interests and expertise of engineering faculty focus on different fields of study grouped around four pillars. renewable energy and bioresources Sustainable Development Wind power Exploitation and development of peat electric and hybrid vehicles Etc. Productique Development of products, processes and systems Performance optimization of processes and industrial equipment advanced industrial systems Planning, management and control of production processes Etc. electromechanical systems Modeling, simulation, design, optimization, control, maintenance and management of industrial systems Telecommunications and information processing photonics Remote sensing Signal Processing Telecommunication and satellite communication and wireless Etc. Employment Opportunities Graduates senior engineering graduate programs occupy positions in several industry sectors such as: electronic; instrumentation and control; telecommunications; aerospace; design; manufacturing; automating; production engineering; energy; aviation; pulp and paper; metal processing; transport; Computer Engineering; wind engineering; marine engineering; R and D. The main functions for Graduates are: project manager; Director of R & D; researcher or associate researcher; systems engineer; project engineer; systems designer; responsible for experimentation; product development engineer; PhD student (for master's degrees). OBJECTIVES Contribute to increasing the scientific and technical knowledge in engineering, introduction to research and technological innovation and form autonomous and competent specialists able to perform a professional practice of high level in various fields of engineering and applied science . More specifically, the student should, on completion of its study program: having acquired more knowledge in some of the science and technology related to engineering; be able to apply this knowledge to issues, situations or various projects related to its specialization; demonstrate a critical able to propose and evaluate solutions to specific engineering problems; be able to conduct an engineering project in its area of ​​specialization; demonstrating that it is able to communicate orally and in writing in a clear and consistent manner, the results of scientific research work. In the thesis promotes the development of the research component of the candidate's training by deepening knowledge in a field of specialization; [-]

Master of Engineering: Mechanical-Aerospace

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

Windsor’s unique climate of co-operation between academic, business and industry sectors gives you access to state-of-the-art engineering facilities and outstanding career opportunities. [+]

Best Part time Masters in Engineering & Technology in Canada. Windsor’s unique climate of co-operation between academic, business and industry sectors gives you access to state-of-the-art engineering facilities and outstanding career opportunities. The Faculty of Engineering offers programs designed to develop professional competence and to prepare students to solve the technical problems of society and the global environment. Our departments include: Civil and Environmental Engineering Electrical and Computer Engineering Industrial and Manufacturing Systems Engineering Mechanical, Automotive & Materials Engineering On behalf of our entire Faculty, we'd like to welcome you! Whether you're a high school student trying to figure out what Engineering is all about, a potential graduate student considering advanced study through a Masters or Doctoral degree, a company or industry representative wondering if our university can assist you with a research problem, we're positive that the Faculty of Engineering here at the University of Windsor can help you. For those of you who are new to university, please browse our Faculty website to find out more about what Engineering is, what we can offer you, and if you can't find the information you need, please drop us a line. We certainly hope you will join us, ready to embark on a challenging and exciting journey of education. Engineering takes work, but it is work that is well rewarded. When you finish, you'll have a degree that can lead you to many places. For those of you who already have an undergraduate degree and wondering if you should further enhance your education, we say "yes!" The demands on professional engineers around the world are increasing in terms of what they must address: our society must confront technical, societal, and environmental issues. A Masters or Doctoral degree in Engineering here at UWindsor demonstrates your commitment to the profession: we're confident that our faculty can give you that edge professionally, and reward you personally through the insights you gain. For those of you in industry, consider our Faculty as your "first stop" if you have challenges in your business or workplace that need to be addressed. We can bring some of our best minds to the table, and you'll have some of our brightest and most enthusiastic graduate students - the next generation of problem solvers - working on your challenges to turn them into opportunities. Our Faculty has seen a tremendous amount of change and interest in the last few years. We're very proud to say that much of this is because of our students. We recently had several top places finishes in the Ontario Engineering Competition; a first place finish in the North American Big Beam challenge; achieving top ten percent placings in the SAE competitions; a dynamic Engineers Without Borders chapter; hosting the Canadian Federation of Engineering Students; two consecutive first place finishes at the Waterloo Robot Racer Competition – and there are more accomplishments too numerous to mention! But we're equally proud of our students who have helped win the "small victories." Students who enter our Faculty dream about making a difference: when they graduate, they have the skill, knowledge, and passion to do so. We believe as a future professional engineer, you cannot stop learning. With that in mind, our Faculty has embarked on a number of educational initiatives to enhance what we offer and how we offer them. Some examples include the support program for our First Year Engineering (WINONE) students, and an innovative Masters in Engineering program to serve the needs of our students. Our new $110 million Centre for Engineering Innovation (CEI) serves as a dynamic hub for learning, research, and industry liaison at the University of Windsor. Mechanical Engineering with an Aerospace Option (with optional Co-op) Teaches the manufacturing, maintenance and logistics that serve the aerospace industry Involves the application of aerospace-related skills toward developing the next generation of aerospace materials, production methods and components, and toward improving aerospace operational challenges Career Tracks: State-of-the-art manufacturing and production Business Government Systems design/operation/building/maintenance Consulting Transportation Pollution control and prevention Advanced computing and communications Medicine and medical technology Bio-based engineering Research and development Structural design Failure analysis Construction and infrastructure renewal Scheduling and optimization Automotive industry Environmental protection Project, process and systems management Robotics and advanced electronics Power generation and distribution [-]

Master of Engineering: Mechanical-Materials

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. [+]

MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. Engineering Materials The Vision Statement for the Engineering Materials Graduate Program is: The Engineering Materials Graduate Program recognizes the close relationship between advanced level education and the advancement of knowledge, and is committed to excellence in graduate teaching and research. The Mission statement for the Engineering Materials Graduate Program is to provide an outstanding learning environment for productive graduate research to maintain state-of-the-art research laboratories equipped with the most modern research equipment to offer students with opportunities for a rewarding education to keep self-sustained growth by a high output of student co-authored peer-reviewed research publications, and strengthening collaborative research with other universities and industry to expose students to challenging industrial problems that are studied using a sound scientific methodology and experimental/theoretical research skills to prepare students for careers in teaching and/or research in academia or in industry to train students to acquire autonomy in conducting innovative research The Engineering Materials (EM) graduate program is fully accredited by the Council on Quality Assurance of Ontario Universities (previously, Ontario Council on Graduate Studies (OCGS)). The high caliber of the research activity within the Engineering Materials Program has been a traditional strength of the program. The objective of the program is to continue to provide an outstanding learning environment for productive graduate research. The Engineering Materials faculty members are constantly seeking to attract the best qualified students to the Master’s and Ph.D. programs, and provide them with fundamental research skills on the processing, microstructures, properties, and performance of materials. We make every effort to provide a stimulating and dynamic learning and research environment that fosters the intellectual development of our students. Close relations with industry expose our students to challenging industrial problems that are studied using a sound scientific methodology and experimental/theoretical research skills. As a result, our MASc. graduates become highly regarded professionals in the materials and manufacturing industries, many assuming leadership positions. General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. Program Requirements An MEng Degree may be awarded upon successful completion of a total of 8 courses (the MEng has no research component/thesis/work with a faculty supervisor). Of these 8 courses ... 5 to 8 must be from the student's department (major; electrical, electrical-computer, mechanical, materials, industrial, environmental, civil) 0 to 3 may be from another engineering department 0 to 2 may be from a department outside of engineering Co-op work experience is optional [-]

Master of Engineering

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. [+]

Best Part time Masters in Engineering & Technology in Canada. MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. MEng degrees are available in: Electrical Engineering Electrical-Computer Engineering Mechanical Engineering Materials Engineering Industrial Engineering Environmental Engineering Civil Engineering General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. Program Requirements An MEng Degree may be awarded upon successful completion of a total of 8 courses (the MEng has no research component/thesis/work with a faculty supervisor). Of these 8 courses ... 5 to 8 must be from the student's department (major; electrical, electrical-computer, mechanical, materials, industrial, environmental, civil) 0 to 3 may be from another engineering department 0 to 2 may be from a department outside of engineering Co-op work experience is optional [-]

Master of Engineering: Mechanical-Automotive Option

University of Windsor
Campus 3 semesters September 2017 Canada Windsor

The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. [+]

The objective of the Master of Engineering - Mechanical Engineering (Automotive Option) is to prepare graduates for leadership positions within the automotive industry. The University of Windsor is known as “Canada’s Automotive University” and you will experience firsthand the reasons why – through collaborations with industry and other partners. You will have access to exceptional research laboratories where you will receive hands-on experience and further develop your knowledge. At the University of Windsor, we strive to create an environment of learning, opportunity, and personal and professional growth. Our students go on to pursue careers in government, industry and at various universities across North America and the world. Our friendly and safe campus is ideal for learning about and becoming a part of the automotive industry. We are located on the Canada-United States border in the automotive and manufacturing heartland of North America. Our unique location means that we can offer our students opportunities for international study, research and work experience that no other university in Canada can match. Learn from the best The key to a great university education is the quality of its teaching and research done by its professors. At the University of Windsor, you will be interacting with world-class faculty conducting cutting-edge research in the automotive area. They will be your mentors as you prepare yourself for the careers of the future. You will combine what you learn in the classroom with practical application so that you are ready for the world of opportunities that will follow your university studies. Program Details MEng Mechanical Engineering (Automotive Option) is a professional, course based Masters program. The goal of the program is to provide you with the opportunity to extend your understanding of automotive engineering principles, with an emphasis on operation, design, materials and manufacturing along with some aspects of business and management. You will study and live in Canada for approximately one year and will complete eight courses. The courses are selected by academic administration and will vary from year to year. Students who require additional English language training must complete a eight week English language training program and orientation to Canada prior to commencing their studies. Students who demonstrate excellent English language skills will be exempted from this program. Course Offerings The Master of Engineering - Mechanical Engineering (Automotive Option) consists of eight prescribed courses taught over three academic terms. Courses may include: Advanced Internal Combustion Engines Hybrid Powertrains Fundamentals of Clean Engine Technology Advanced Manufacturing Methods Vehicle Dynamics Automotive Sensor Systems Vehicle Thermal Management Automotive Applications for Noise, Vibration & Harshness Evaluation After-treatment & Internal Combustion Engine Modeling Paint & Industrial Coatings Vehicle Concept Development The courses will vary from year to year depending on current market trends in the automotive industry and availability. Admission requirements for the Master of Engineering - Mechanical Engineering (Automotive Option) Confirmation of successful completion of a Bachelor of Applied Science (or equivalent degree) in Engineering from an academic institution approved by the University of Windsor. Applicants with degrees in related fields may also be considered. Evidence of having obtained a B average (75%) or higher in undergraduate studies (when converted to University of Windsor standards). Demonstrated English proficiency by meeting or exceeding one of the following test: - IELTS score of at least 6.5 or equivalent A successful interview with a representative from the University of Windsor Two letters of reference Enrolment is limited. Preference will be given to candidates who exceed the above minimum requirements and those who have relevant work experience. Internship Option In the summer following the completion of all coursework, you may have an opportunity to participate in an optional internship. This will allow you to apply your new knowledge and skills to real world situations within various organisations. If opportunities are limited, the selection may become a competitive process. We cannot guarantee that an internship will be offered to each student. Compliment your education Extracurricular activities are an important part of your education. From time to time, arrangements may be made for you to participate in seminars about industry leading topics. [-]

Master of Engineering: Industrial (optional Minor in Business)

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

Graduate programs in Industrial and Manufacturing Systems Engineering (IMSE) are designed to meet the clear and growing need for highly qualified personnel trained to have a deep appreciation for the important systems issues in manufacturing, to prepare candidates for an academic career in teaching and research or leadership roles in industrial research and development and academia. [+]

Best Part time Masters in Engineering & Technology in Canada. MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. Graduate programs in Industrial and Manufacturing Systems Engineering (IMSE) are designed to meet the clear and growing need for highly qualified personnel trained to have a deep appreciation for the important systems issues in manufacturing, to prepare candidates for an academic career in teaching and research or leadership roles in industrial research and development and academia. The objective of this program is to impart the required multi-disciplinary education and skills in an environment that fosters excellence in research and awareness of the many challenges of modern Industrial and modern Manufacturing Systems. General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. Program Requirements An MEng Degree may be awarded upon successful completion of a total of 8 courses (the MEng has no research component/thesis/work with a faculty supervisor). Of these 8 courses ... 5 to 8 must be from the student's department (major; electrical, electrical-computer, mechanical, materials, industrial, environmental, civil) 0 to 3 may be from another engineering department 0 to 2 may be from a department outside of engineering Co-op work experience is optional [-]

Master of Engineering: Electrical

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. [+]

MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. ELECTRICAL ENGINEERING AREAS OF SPECIALIZATION Research is carried out in the broadly defined area of Signals and Systems. Within the area of Signals and Systems such research topics as digital signal processing, microsystems, communications and computers are investigated. General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. Program Requirements An MEng Degree may be awarded upon successful completion of a total of 8 courses (the MEng has no research component/thesis/work with a faculty supervisor). Of these 8 courses ... 5 to 8 must be from the student's department (major; electrical, electrical-computer, mechanical, materials, industrial, environmental, civil) 0 to 3 may be from another engineering department 0 to 2 may be from a department outside of engineering Co-op work experience is optional [-]

Master of Engineering: Environmental

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. [+]

Best Part time Masters in Engineering & Technology in Canada. MEng Program Information In order to graduate with an MEng degree, a student must successfully complete eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialisation. ENVIRONMENTAL ENGINEERING AREAS OF SPECIALIZATION In the Environmental Engineering program, research focuses on air and water quality and modeling, wastewater and industrial waste treatment, and ground water contamination. General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. Program Requirements An MEng Degree may be awarded upon successful completion of a total of 8 courses (the MEng has no research component/thesis/work with a faculty supervisor). Of these 8 courses ... 5 to 8 must be from the student's department (major; electrical, electrical-computer, mechanical, materials, industrial, environmental, civil) 0 to 3 may be from another engineering department 0 to 2 may be from a department outside of engineering Co-op work experience is optional [-]

Master of Engineering: Civil

University of Windsor
Campus Part time 3 - 5 semesters September 2017 Canada Windsor

The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. [+]

General The Master of Engineering (MEng) degree offered at the University of Windsor is a course work professional program open to students who satisfy the admission requirements. The MEng Program takes three to five semesters to complete but is structured in such a way that it may be completed in one year by a full-time student. The minimum period of full-time registration for the MEng degree is three semesters and the maximum allowable time is five semesters. For part-time students, the minimum period of registration for the MEng degree is six semesters and the maximum allowable time is fifteen consecutive semesters. Practical work-experience placements (paid and unpaid) may be available for full-time students only, but cannot be guaranteed. CIVIL ENGINEERING AREAS OF SPECIALIZATION Within Civil Engineering, the available fields are Structural Engineering and Water Resources Engineering. In the Structures field, research encompasses ACM, structural dynamics, fatigue damage assessment, steel, concrete technology, soil mechanics, and foundations. In the Water Resources field, research is in hydraulics, hydrology, and hydrogeology. Schemes of Study The Master of Engineering may be taken by full-time students or those who wish to study on a part-time basis while remaining in full-time employment external to the University. All applicants for the MEng program are expected to be entirely self-funded and no financial assistance will be provided by the Faculty of Engineering or the University of Windsor. International students are admitted as full-time students only. Full-Time Students will be: required to register for a maximum of three courses per semester, required to register for a minimum of two courses per semester, expected to complete all degree requirements within 5 academic semesters. Part-Time Students will be: required to register for a maximum of admissible two courses per semester, required to complete all degree requirements within 15 academic semesters and should not have more than two semesters of continuous "inactive" status Admission Requirements The Department should approve the application and in addition, MEng applicants shall be recommended for admission by the Faculty of Engineering Coordinator. Official admission to any program of graduate studies is in the form of a "Letter of Acceptance" issued by the Faculty of Graduate Studies. Please note that the following are minimum requirements and do not guarantee admission. Undergraduate degree (BASc / B.Sc. / B.Eng. degree or equivalent*) with at least 73% average over the last two years. International applicants are advised to refer to the specified minimum admission requirements, listed by country, at the Faculty of Engineering’s Professional and Graduate Studies (FEPGS) website and the Faculty of Graduate Studies website. *Candidates with degrees in such areas as Mathematics, Physics and Computer Science will also be considered. Students whose undergraduate degree programs do not provide them with sufficient background in Design, Applied Science and Professional/Technical communications are required to enter a qualifying program of courses at the undergraduate level before admission to candidature for the MEng degree. Students entering and successfully completing the MEng qualifying program may receive an Advanced Certificate in Engineering. A candidate who has not fulfilled the minimum requirement of 73% average may be admitted to the MEng Program as a probationary student** provided that he/she has either: at least 2 years of industrial or engineering experience following graduation or achieved at least 77% overall standing in the Final Year of the graduation. **Such candidates will be required to achieve a grade of at least 73% in the first two MEng courses to be regularized in the MEng Program. The language of instruction for the MEng courses is English. Applicants will be required to provide certification of English language proficiency, if he or she has: not completed three or more years of post-secondary work at a Canadian institution or at an institution at which English was the primary language of instruction***, *** Countries in which English is the Official Language of Instruction, as recognized by the Faculty of Engineering are listed on the Faculty of Engineering’s FEPGS website and the Faculty of Graduate Studies website. English Language proficiency may be met by the language coursework at the secondary school level in the countries listed on the FEPGS website. or not been employed for a similar period of time in a position in which English was the primary language of business. Where applicable a student’s certification of English language proficiency can be demonstrated by a minimum score set by the department. For minimum requirements in other equivalent exams, information is available in the Faculty of Graduate Studies web-site. The Faculty of Engineering and the Faculty of Graduate Studies reserve the right to require further demonstration of English Language proficiency. The Department may consider for admission to its degree programs students from outside Canada who have excellent academic preparation, but who do not meet the usual standards of English language proficiency. Successful completion of the English Language Improvement Program (ELIP) will be considered as a means to gain admission to the Department for such students. Students who do not meet the academic requirements outlined above may be considered for admission to a transitional, probationary or qualifying program depending on their academic background. Students seeking admission to the Department’s MEng programs must also complete the Department’s Graduate Student Information Form and the Faculty of Graduate Studies Admission Reference form. [-]

Master Européen Informatique

INEAD
Online 2 years Open Enrollment Canada Canada Online

Master Européen** délivré par la Fédération Européenne des Ecoles (FEDE) – Association régie par le droit suisse (CCS.art 60-79). Le Master Européen est un diplôme européen validé par l’IACBE (International Assembly for Collegiate Business Education) qui est un organisme d’accréditation américain. [+]

Best Part time Masters in Engineering & Technology in Canada. UNE FORMATION, DES OBJECTIFS Connaître les aspects géographiques, géopolitiques et économiques de l’Europe Apprendre l’administration des réseaux, la gestion de parc informatique, la sécurité des systèmes d’information et l’administration des systèmes d’exploitation Apprendre à développer des applications et créer des bases de données Maîtriser la programmation avancée, les systèmes temps réel et embarqués Savoir conduire un projet UN MÉTIER Responsable sécurité des systèmes d’information Chef de projets Consultant en système d’information Auditeur informatique Chef de projet pour le développement d’applications PROGRAMME Stages: Stage ou mission en entreprise de 6 à 12 semaines en 1ère année et 12 semaines en 2ème année Ou Alternance (nous consulter) Langue vivante : 1 langue obligatoire 1 langue supplémentaire en option INFORMATIONS PRATIQUES Conditions d'admission: Niveau II (bac+3) 180 crédits ECTS Sur dossier Examens: Plusieurs sessions par an, organisées dans des centres partenaires FEDE (France et monde) Niveau De Sortie : Bac +5 Informations Diplôme : Master Européen** délivré par la Fédération Européenne des Ecoles (FEDE) – Association régie par le droit suisse (CCS.art 60-79). Le Master Européen est un diplôme européen validé par l’IACBE (International Assembly for Collegiate Business Education) qui est un organisme d’accréditation américain. [-]