Masters in Engineering & Technology in Belgium

See Masters Programs in Engineering & Technology in Belgium 2017

Engineering & Technology

In order to successfully obtain a Masters qualification, you will need to obtain a number of credits by passing individual modules. Most taught Masters will have a number of core modules which you must take and pass in order to obtain the qualification. The assessment of research Masters is almost always entirely by a single dissertation module or project.

Studies in engineering and technology prepare you for the technologically oriented workforce of today.

Members of the workforce with engineering and technology training are sought out by many industries including medical research and computer software development.

 

With university education being upper most level in the education system of the Belgium, the government has put more emphasis to make sure that the students’ lives is made as simple as possible through the loan and grants programs. They offer sponsors for international students with poor and vulnerable backgrounds who would like to study in this country.

Top Master Programs in Engineering & Technology in Belgium 2017

Read More

Executive Master of IT Management (MITM)

Antwerp Management School
Campus Part time 2 years September 2017 Belgium Antwerp

The competitiveness and innovation capability of organizations increasingly rely on the strategic and efficient use of new information and communication technologies. Business Managers have to be responsible for IT-enabled investments and projects. They cannot avert such decisions or simply hand them over to “IT”. Managing the digital enterprise is an end-to-end responsibility between business and IT. Therefore, it’s necessary that business managers become more IT savvy and IT managers have to grasp how IT supports the business strategy. [+]

Best Masters in Engineering & Technology in Belgium 2017. Executive Master of IT Management (MITM) Are your digital assets bringing sufficient value to your business processes and organization? The competitiveness and innovation capability of organizations increasingly rely on the strategic and efficient use of new information and communication technologies. Business Managers have to be responsible for IT-enabled investments and projects. They cannot avert such decisions or simply hand them over to “IT”. Managing the digital enterprise is an end-to-end responsibility between business and IT. Therefore, it’s necessary that business managers become more IT savvy and IT managers have to grasp how IT supports the business strategy. Why follow this program at Antwerp Management School? Rooted in science: more than 20 years of research on business and IT alignment; Proven in practice: Our academic faculty advised more than 100 companies worldwide; Flexibility in starting dates via Master Classes on hot topics; Grow your network value via 3 ecosystems: TIAS, Maastricht University School of Business & Economics and Antwerp Management School; C-level guest speakers and international faculty ensure an up-to-date global outlook; Antwerp Management School is the only management school with a double accredited Master Degree in Benelux. What can you expect? Content level: deepening expertise, strategic After attending this program You will have a broader and deeper understanding of general management and IT management; You an implement information technology to help innovate the enterprise and gain a sustainable competitive advantage; You can translate business strategies into IT strategies and goals and metrics. You are able to integrate enterprise and IT architecture aspects with areas of enterprise and IT governance and value management; You will deliver a master consultancy project that can be used in your daily work; You will receive an official and internationally accredited master’s degree from Antwerp Management School and a University Certificate of Maastricht University School of Business & Economics. You will be prepared to successfully obtain professional certifications such as ISACA’s CISA, CISM, CRISC and CGEIT Dates Starts: 29th of September 2016 Duration: 2 years, part-time In-class sessions are organized every 3 weeks in blocks of 2 days: Thursdays from 14:00 – 22:00 and Fridays 09:00 – 17:00 Fees € 19500 (VAT exempted) Includes: documentation, books and residential opening seminar. Location Antwerp Management School Sint-Jacobsmarkt 9-13 BE-2000 Antwerp Belgium Requirements Candidates should hold a master degree (or an equaled by sufficient working experience) and have at least 5 years of relevant work experience. Degree/certification The Master of IT Management is officially acknowledged by the Flemish Community as a major of the “Master of Enterprise IT Architecture” and will be awarded upon successfully completing of the program. Alumni can demonstrate their “Msc” (master of science) title. The program is AACSB and NVAO accredited. In addition, you receive a University Certificate of Maastricht University School of Business & Economics. [-]

Etna Software Architect Master Of Online App Developer

IONISx
Online Part time 3 years Open Enrollment Belgium Belgium Online

Turn innovative ideas into concrete solutions is the key to the digital economy: Become an expert in software programming and applications. [+]

Turn innovative ideas into concrete solutions is the key to the digital economy: Become an expert in software programming and applications. WHY THIS COMPUTER MASTERS ONLINE ETNA? You want to find a job in the computer after upgrading your skills, career reorientation, or as part of an initial training? The ETNA program allows you to access programs from a computer school recognized total flexibility. Fully online, this course is for the candidate (s) who have professional and personal life in charge or who want to accelerate their learning. TRADES A gateway to the digital professions in high demand: software architect Project Manager Application Developer computer applications engineer IT consultant SKILLS & GOALS Master new skills with our project-based teaching Know and use the most used technologies in the market (JAVA, .NET ...). Adapt to technological change. Master the different development technologies to be able to fit quickly into a team and become project manager. Integrating a quality approach. CONDITIONS OF ADMISSION Bac + 2 for the first year, and +3 for the third year. THIS COURSE IS AVAILABLE For students with a BAC + 2 level who want to target the graduation. Professionals, for which a device VAP (Validation of Acquired Partial) validates the gains they already own. For applicants seeking employment or those who wish to resume their careers. TRAINING DURATION structured curriculum: Two 3-year revenue per year: October and March RATE Student price: € 2500 TTC / level business price: 3 000 € / Level RNCP TITLE 9874 Software Architect-Developer (honest) Application ETNA Since 2004, the School of Applied Digital Technologies shape every future year "application developers software architects" and "network systems architects and security", with a placement rate of 100% business. [-]

Master Européen Informatique

INEAD
Online 2 years Open Enrollment Belgium Belgium Online

Master Européen** délivré par la Fédération Européenne des Ecoles (FEDE) – Association régie par le droit suisse (CCS.art 60-79). Le Master Européen est un diplôme européen validé par l’IACBE (International Assembly for Collegiate Business Education) qui est un organisme d’accréditation américain. [+]

Best Masters in Engineering & Technology in Belgium 2017. UNE FORMATION, DES OBJECTIFS Connaître les aspects géographiques, géopolitiques et économiques de l’Europe Apprendre l’administration des réseaux, la gestion de parc informatique, la sécurité des systèmes d’information et l’administration des systèmes d’exploitation Apprendre à développer des applications et créer des bases de données Maîtriser la programmation avancée, les systèmes temps réel et embarqués Savoir conduire un projet UN MÉTIER Responsable sécurité des systèmes d’information Chef de projets Consultant en système d’information Auditeur informatique Chef de projet pour le développement d’applications PROGRAMME Stages: Stage ou mission en entreprise de 6 à 12 semaines en 1ère année et 12 semaines en 2ème année Ou Alternance (nous consulter) Langue vivante : 1 langue obligatoire 1 langue supplémentaire en option INFORMATIONS PRATIQUES Conditions d'admission: Niveau II (bac+3) 180 crédits ECTS Sur dossier Examens: Plusieurs sessions par an, organisées dans des centres partenaires FEDE (France et monde) Niveau De Sortie : Bac +5 Informations Diplôme : Master Européen** délivré par la Fédération Européenne des Ecoles (FEDE) – Association régie par le droit suisse (CCS.art 60-79). Le Master Européen est un diplôme européen validé par l’IACBE (International Assembly for Collegiate Business Education) qui est un organisme d’accréditation américain. [-]

Master in Business Engineering

Louvain School of Management
Campus Full time 2 years September 2017 Belgium Louvain-la-Neuve

This master is designed to strengthen the management skills of students having a background in sciences and technologies (energy, electronics and telecommunications, mechanical engineering and processes, physics…) in addition to their training in economics and management and quantitative methods. This programme focuses particular attention on developing students’ ability to model and set out management problems so as to propose solutions and improvements, and to make use of technological processes and learn how to manage them. [+]

FOR WHO? This master is designed to strengthen the management skills of students having a background in sciences and technologies (energy, electronics and telecommunications, mechanical engineering and processes, physics…) in addition to their training in economics and management and quantitative methods. This programme focuses particular attention on developing students’ ability to model and set out management problems so as to propose solutions and improvements, and to make use of technological processes and learn how to manage them. WE OFFER: Professional focus courses in the field of business engineering with in-depth study of the distinctive disciplines of the engineer: quantitative methods, technology, information systems, innovation and project management; A course on corporate social responsibility as well as a seminar on topical issues in economics and management; Two option courses: to specialize in one or two fields of management, either in a particular discipline or in a multidisciplinary field: Supply Chain Management (EN), Innovation Management (EN), Sourcing and procurement (EN), Information Systems (EN), Management Research (EN), Quantitative Finance (EN-FR), Entrepreneurship (EN-FR), Finance and Accounting (EN-FR), Marketing (EN-FR), Environmental Management (FR). An optional international exchange (or elective courses at LSM) An internship and a final master’s thesis. OUR INTERNATIONAL OPPORTUNITIES: -> Possibility to do an academic exchange in one of our 145 partner universities. -> Access to 3 challenging international premium tracks, for high-profile students aiming at an international career: 1. CEMS-MIM: CEMS Master’s in International Management A top-ranked joint degree delivered by CEMS School Members. A postgraduate, pre-experience degree open to a selected group of students enrolled in a Master’s programme in one of the 29 leading universities in the CEMS Alliance. Offers double degree: Master from the LSM and the CEMS Master in International Management Experience studying abroad in one of the 29 CEMS School in Europe or outside Europe Access to a network of CEMS Corporate Partners (multinational and local companies): Annual Career Forum, Soft Skills Seminars, etc… Practice of 3 languages - one of which must be English. 2. International Business - IB 25 selected students the opportunity to act as intrapreneurs, undertaking concrete initiatives in an international context and transforming ideas into business success. One year abroad: 3 to 6 months of academic exchange in a partner university and a 6-month internship within an international SME, multinational or NGO outside Europe. 3. Double Degree – DD A fantastic opportunity to become an expert in specific management fields; to discover another teaching method; to immerse in another country and to bring language skills to a professional level. These programmes aim to prepare future business leaders to handle global development and acquire international management competencies, in a cross-cultural environment and to develop a global mindset. Graduate from two different renowned universities Double Degree partner institutions: Aalto University School of Business (Helsinki, Finland) Norwegian School of Economics (Bergen, Norway) Nova School of Business and Economics (Lisbon, Portugal) Universität zu Köln (Cologne, Germany) Vytautas Magnus University (Kaunas, Lithuania) KULeuven (Leuven, Belgium) Instituto Superior Técnico - Technical University of Lisbon, Portugal [-]

Master of Science in Electromechanical Engineering Technology

KU Leuven - University of Leuven
Campus Full time 1 year September 2017 Belgium Leuven

The cornerstones of this programme are mechanical design and energy conversion. The former starts with an idea that is shaped in a graphical design and results in a finished product through choice of materials, simulation and production technique. Energy conversion is aimed at all aspects of energy efficiency in this process and ranges in practice from electrical controls and automation to thermal power plants, combustion engines, climatisation, etc. [+]

Best Masters in Engineering & Technology in Belgium 2017. The cornerstones of this programme are mechanical design and energy conversion. The former starts with an idea that is shaped in a graphical design and results in a finished product through choice of materials, simulation and production technique. Energy conversion is aimed at all aspects of energy efficiency in this process and ranges in practice from electrical controls and automation to thermal power plants, combustion engines, climatisation, etc. Intelligent Manufacturing option The issues covered in this option include the latest production techniques; the way production systems operate; and the intrinsic relationship between production and other business processes, especially the design process. At the core of this option are the possibilities that computer-based systems offer in this context. Moreover, you learn to factor in the tension between technology, economics, and the environment and ergonomics. Intelligent Mechanics option The option Intelligent Mechanics relates to designing, developing and optimising automated mechanical machines. Based on a strong background in electricity and mechanics, you delve more deeply into aspects like advanced design methods, electronic operations, controls, measures and drives, data communication and visualisation methods. Intelligent Mobility option Intelligent Mobility deals with the sustainable application of smart solutions. Its application area is very broad, but examples include: fitting electric or hybrid cars with intelligent recharging systems and designing vehicles that can warn each other about accidents or traffic jams. Intelligent Mobility also has to do with choosing materials or production methods that have the smallest ecological impact possible, and optimally syncing transportation systems to one another. This is an initial master's programme and can be followed on a full-time or part-time basis. Add an in-company or project-based learning experience to your master's programme You can augment your master's programme with the Postgraduate Programme Innovation and Entrepreneurship. This programme is made up by a multifaceted learning experience in and with a company, with an innovative engineering challenge as the central assignment. It is carried out in a team setting, has a distinct international dimension, and usually requires a multidisciplinary approach. Entrepreneurs and students alike are encouraged to innovate, transfer knowledge and grow. It is a unique cross-fertilisation between company and classroom. Profile Are you a future industrial engineer? Are you a doer and are you fascinated by how and why things are done? Then you must be a future industrial engineer! - You enjoy looking into how to implement new ideas and improve old ones; - You prepare abstract designs for implementation in a business environment; - You like to link theory to practice; - You aim for a position of responsibility that allows you to apply your knowledge to concrete challenges in the day-to-day workings of a company; - You are eager to develop excellent communication and management skills. Objectives The Master of Industrial Sciences in Electromechanical Engineering is capable of: selecting, formulating, analyzing and answering appropriately a research question of his own choice based on a theoretical or practical problem in his area of technology while taking into consideration the paradigms and making use of appropriate research methodology. achieving maximum efficiency from products and machinery through computer-aided engineering in areas of dimension and control, materials design, kinematic, dynamic and thermal behaviour. analyzing and structuring problems of production control at the level of computer integrated manufacturing (CIM) and designing and implementing controls for installations. managing technology and communicating efficiently the results of his own work, study and research. continuing the process of self-education as well as coaching others in their development as individuals and professionals. integrating relevant research, work and/or study experiences acquired in other environments either at home or abroad. functioning and cooperating in multidisciplinary and international teams through project work and through an exchange of views and opinions. recognizing and taking into consideration the ethical, economic, ecological and aesthetic aspects and implications of his actions. International Students Diversity and an open mind are vital elements in the international learning and work environment at the Group T campus. The student population, staff, and guests come from all corners of the world, turning our campus into a true intercultural nexus for bachelor- and graduate-level education, university-industry collaboration, innovation and professional development. Advantages for international students - All of our undergraduate and graduate degree programmes are offered in English. English is ubiquitous both inside and outside the classroom. If you've mastered English, you'll feel right at home. - Admission to our programmes is not based on an entrance exam. Anyone with the necessary background can apply. - An engineering degree from KU Leuven's Group T campus is a stepping stone to universities and businesses worldwide. Our international network ensures that your degree is recognised by educational institutes and companies in Europe and across the globe. - Leuven is one of Europe's oldest university towns and is located in the heart of Western Europe - just 20 minutes from Brussels, and within easy reach of Paris, Amsterdam, and London. - Tuition fees are markedly lower than those of comparable universities in the US or the UK. Also, Leuven is a mid-sized university town, so cost-of-living expenses tend to be lower than those of other university towns. - The International Office at KU Leuven, Group T Campus has years of experience in welcoming international students from universities worldwide. [-]

Master of Science in Chemical Engineering Technology

KU Leuven - University of Leuven
Campus Full time 1 year September 2017 Belgium Leuven

This master's programme includes a variety of disciplines. In addition to fundamental chemical-scientific course units, the curriculum includes the fields of socio-economics (company management, economics) and chemical technology (engineering, separation techniques, chemical process technology, industrial process technology, surface chemistry, environmental technology, etc.). [+]

This master's programme includes a variety of disciplines. In addition to fundamental chemical-scientific course units, the curriculum includes the fields of socio-economics (company management, economics) and chemical technology (engineering, separation techniques, chemical process technology, industrial process technology, surface chemistry, environmental technology, etc.). A flexible cross-campus elective package and a master's thesis conducted in either a research-specific or industrial context enable you to focus your studies according to your specific interests and career goals. Sustainable Process and Materials Engineering option In the Sustainable Process and Materials Engineering option emphasis is placed on reliable technology that meets today's needs without jeopardising the welfare of future generations. This implies that materials and energy must be used efficiently, taking into account their impact on the environment. Thus, on the one hand this option is aimed at sustainable designing, development, and manufacturing of products and systems, and on the other it is aimed at development, properties, characterisation, production and processing of (new) materials. This is an initial master's programme and can be followed on a full-time or part-time basis. Add an in-company or project-based learning experience to your master's programme You can augment your master's programme with the Postgraduate Programme Innovation and Entrepreneurship. This programme is made up by a multifaceted learning experience in and with a company, with an innovative engineering challenge as the central assignment. It is carried out in a team setting, has a distinct international dimension, and usually requires a multidisciplinary approach. Entrepreneurs and students alike are encouraged to innovate, transfer knowledge and grow. It is a unique cross-fertilisation between company and classroom. Profile Are you a future industrial engineer? Are you a doer and are you fascinated by how and why things are done? Then you must be a future industrial engineer! - You enjoy looking into how to implement new ideas and improve old ones; - You prepare abstract designs for implementation in a business environment; - You like to link theory to practice; - You aim for a position of responsibility that allows you to apply your knowledge to concrete challenges in the day-to-day workings of a company; - You are eager to develop excellent communication and management skills. Objectives The Master of Industrial Sciences in Chemical Engineering is capable of: selecting, formulating, analyzing and answering appropriately a research question of his own choice based on a theoretical or practical problem in his area of technology while taking into consideration the paradigms and making use of appropriate research methodology. designing, implementing, testing, and improving industrial processes in a chemically and technologically responsible manner. researching, developing and applying new materials such as polymers, composites, metals and ceramics. integrating environment and safety in the various phases of a process supported by the principles of sustainable development. managing technology and communicating efficiently the results of his own work, study and research. continuing the process of self-education as well as coaching others in their development as individuals and professionals. integrating relevant research, work and/or study experiences acquired in a different environment either at home or abroad. functioning and cooperating in multidisciplinary and international teams through project work and through an exchange of views and opinions. recognizing and taking into consideration the ethical, economic, ecological and aesthetic aspects and implications of his actions International Students Diversity and an open mind are vital elements in the international learning and work environment at the Group T campus. The student population, staff, and guests come from all corners of the world, turning our campus into a true intercultural nexus for bachelor- and graduate-level education, university-industry collaboration, innovation and professional development. Advantages for international students - All of our undergraduate and graduate degree programmes are offered in English. English is ubiquitous both inside and outside the classroom. If you've mastered English, you'll feel right at home. - Admission to our programmes is not based on an entrance exam. Anyone with the necessary background can apply. - An engineering degree from KU Leuven's Group T campus is a stepping stone to universities and businesses worldwide. Our international network ensures that your degree is recognised by educational institutes and companies in Europe and across the globe. - Leuven is one of Europe's oldest university towns and is located in the heart of Western Europe - just 20 minutes from Brussels, and within easy reach of Paris, Amsterdam, and London. - Tuition fees are markedly lower than those of comparable universities in the US or the UK. Also, Leuven is a mid-sized university town, so cost-of-living expenses tend to be lower than those of other university towns. - The International Office at KU Leuven, Group T Campus has years of experience in welcoming international students from universities worldwide. [-]

Master of Science in Biochemical Engineering Technology

KU Leuven - University of Leuven
Campus Full time 1 year September 2017 Belgium Leuven

This master's programme incorporates knowledge from various sectors (food, biomedical, pharmaceutical, environmental, etc.) to provide a well-rounded graduate-level curriculum in biomechanical engineering. In addition to fundamental (bio)chemical-scientific course units, you will take courses in socio-economics (company management, economics) and biotechnology (engineering, separation techniques, fermentation technology, molecular biology techniques, industrial biochemistry and microbiology, environmental technology, bioreactor design, etc.). [+]

Best Masters in Engineering & Technology in Belgium 2017. This master's programme incorporates knowledge from various sectors (food, biomedical, pharmaceutical, environmental, etc.) to provide a well-rounded graduate-level curriculum in biomechanical engineering. In addition to fundamental (bio)chemical-scientific course units, you will take courses in socio-economics (company management, economics) and biotechnology (engineering, separation techniques, fermentation technology, molecular biology techniques, industrial biochemistry and microbiology, environmental technology, bioreactor design, etc.). A flexible cross-campus elective package and a master's thesis conducted in either a research-specific or industrial context enable you to focus your studies according to your specific interests and career goals. Medical Bioengineering option This option relates to biotechnological developments in the medical sector. Knowledge of human physiological systems (the cardiovascular system, neurophysiology, etc.) and medical engineering techniques form the foundation of developments in the area of artificial organs, tissue engineering, biomaterials, bioelectronics and new diagnostic techniques (microarray technology, PCR technology). This is an initial master's programme and can be followed on a full-time or part-time basis. Add an in-company or project-based learning experience to your master's programme You can augment your master's programme with the Postgraduate Programme Innovation and Entrepreneurship. This programme is made up by a multifaceted learning experience in and with a company, with an innovative engineering challenge as the central assignment. It is carried out in a team setting, has a distinct international dimension, and usually requires a multidisciplinary approach. Entrepreneurs and students alike are encouraged to innovate, transfer knowledge and grow. It is a unique cross-fertilisation between company and classroom Profile Are you a future industrial engineer? Are you a doer and are you fascinated by how and why things are done? Then you must be a future industrial engineer! - You enjoy looking into how to implement new ideas and improve old ones; - You prepare abstract designs for implementation in a business environment; - You like to link theory to practice; - You aim for a position of responsibility that allows you to apply your knowledge to concrete challenges in the day-to-day workings of a company; - You are eager to develop excellent communication and management skills. Objectives The Master of Industrial Sciences in Biochemical Engineering is capable of: · selecting, formulating, analysing and answering appropriately a research question of his own choice based on a theoretical or practical problem in his area of technology while taking into consideration the paradigms and making use of appropriate research technology. · exploiting the potential of the natural world in general and life processes in particular for the benefit of a healthy, sustainable and high-quality society. being professionally active in the areas of Biomedical Engineering, Molecular Bioengineering, Bioproduction, and Environmental Engineering. continuing to build and to operate in a multifaceted manner in both an R&D and industrial engineering environment on the basis of a thorough knowledge of bioresearch methods and technology on the one hand and industrial production technology on the other. managing technology and communicating efficiently the results of his own work, study and research. continuing the process of self-education as well as coaching others in their development as individuals and professionals. integrating relevant research, work and/or study experience acquired in a different environment either at home or abroad. functioning and cooperating in multidisciplinary and international teams through project work and through an exchange of views and opinions. recognizing and taking into consideration the ethical, economic, ecological and aesthetic aspects and implications of his actions. International Students Diversity and an open mind are vital elements in the international learning and work environment at the Group T campus. The student population, staff, and guests come from all corners of the world, turning our campus into a true intercultural nexus for bachelor- and graduate-level education, university-industry collaboration, innovation and professional development. Advantages for international students - All of our undergraduate and graduate degree programmes are offered in English. English is ubiquitous both inside and outside the classroom. If you've mastered English, you'll feel right at home. - Admission to our programmes is not based on an entrance exam. Anyone with the necessary background can apply. - An engineering degree from KU Leuven's Group T campus is a stepping stone to universities and businesses worldwide. Our international network ensures that your degree is recognised by educational institutes and companies in Europe and across the globe. - Leuven is one of Europe's oldest university towns and is located in the heart of Western Europe - just 20 minutes from Brussels, and within easy reach of Paris, Amsterdam, and London. - Tuition fees are markedly lower than those of comparable universities in the US or the UK. Also, Leuven is a mid-sized university town, so cost-of-living expenses tend to be lower than those of other university towns. - The International Office at KU Leuven, Group T Campus has years of experience in welcoming international students from universities worldwide. [-]

Master in Business Engineering - taught in FRENCH

University of Mons
Campus Full time 2 years September 2017 Belgium Mons

The master’s degree in business engineering, representing 120 credits, provides solid specialist training in management, enabling effective integration into private or public industrial or non-industrial organisations. [+]

This program is taught in FRENCH. The master’s degree in business engineering, representing 120 credits, provides solid specialist training in management, enabling effective integration into private or public industrial or non-industrial organisations. Profile of the programme The master’s degree in business engineering offers graduates management training that is based on traditional courses (finance, marketing, accounting, law, industrial economics, etc.) but also on specific disciplines that are in high demand in the market, such as the environment, logistics, auditing, entrepreneurship, production management, etc. The curriculum includes: A first year of 60 credits distributed across a common core (human resource management, statistical and econometric methods in management, logistics, financial management, advanced marketing, advanced microeconomics, tax and business law, production management and one of four major options: finance, marketing, auditing and international management). A second year of 60 credits built around a common core of 40 credits (dissertation, internship, strategic management) and a deepening of the major option chosen in the first year of the master’s. Languages are naturally part of the curriculum, and follow the student through to graduation. They are taught in specific language lessons and are used for communication in seminars in English, Dutch or Spanish. The curricula offered by the Warocqué School of Business and Economics have been ISO-certified since 2003. This certification, which is identical to that used in the professional world, involves the various stakeholders in a process leading to continuous improvement in the quality of the education that is provided. This quality approach, with the student at its heart, incorporates support tools such as tutoring, mentoring and remediation, which allow for easier integration into the academic world and improve students’ success rates. Fully involved in the system, the students are regularly consulted in the quest for still higher levels of quality (satisfaction surveys, consultation on exam schedules, academic support, etc.). This approach, unique in higher education in the French Community, has been rewarded more than once with the “Walloon Quality Prize” (2007 and 2009). Key learning outcomes After completing this curriculum, graduates will be able to: join any organisation, be it commercial, industrial or neither, and take part in its management and development at the national or international level, working in finance, accounting, marketing, human resources, international business, environmental management, etc. or move to auditing or accounting reason with the necessary rigour by applying knowledge to various fields of management take into account production constraints when making management decisions use decision support methods and tools apply interdisciplinary skills: independence, rigour, group work, oral presentations, research, etc. create their own business. Occupational profiles of graduates The master’s degree in business engineering is a professional qualification, and enables direct entry into the professional world. Access to further studies The master’s degree in business engineering gives full access to the doctorate in management (including one year of research training in a graduate school). Various advanced master’s degrees are also accessible, such as the advanced master’s in microfinance (run jointly with Paris-Sorbonne, ULB Brussels and Wageningen-UR) Mode of study Full time [-]

Master in Computer Science - taught in FRENCH

University of Mons
Campus Full time 2 years September 2017 Belgium Mons

The Master's Degree in Computer Science includes 120 credits spread out over two years. It certifies solid specialised education in computer science. With the professional focus, it opens doors to careers that are indispensable in all companies and all sectors. [+]

Best Masters in Engineering & Technology in Belgium 2017. This program is taught in FRENCH. The Master's Degree in Computer Science includes 120 credits spread out over two years. It certifies solid specialised education in computer science. With the professional focus, it opens doors to careers that are indispensable in all companies and all sectors. Profile of the programme The Master's Degree in Computer Science, professional focus, includes advanced courses in computer science and other specific disciplines that are demanded on the job market. It truly prepares students for their professional insertion. The first year includes several in-depth courses that cover important issues in computer science and a consequential individual Master's project that will lead to the thesis in second year. The course module "Advanced aspects of software systems" may be replaced by one of the modules offered at ULB: "Conception des systèmes", "Modélisation et algorithmique", "Informatique graphique". The second year includes a 10-week internship in a business, an "entrepreneurship" module that will teach students to create their own business, courses and seminars on new technologies and applications, as well as a thesis that will be defended before a studies committee. The Master's Degree in Computer Science also includes a research focus. It differs from the professional focus in the content of the second year in that it is mainly geared towards research rather than business. Key learning outcomes After completing this curriculum, students will be able to: join any organisation, whether or not it is commercial or industrial, and bring to it their computer expertise, on an international as well as national level hold positions as diverse as that of software architect, software analyst, team leader, project leader, systems manager, database or network manager, create their own business, ... reason with the necessary rigour while applying their skills in the various disciplines of computer science implement crossdisciplinary skills such as autonomy, rigour, analysis, individual or group work, innovation use the methods and computer skills that were learned during the programme. Occupational profiles of graduates The Master's Degree in Computer Science opens doors to computer careers in all kinds of companies and almost all sectors of activity. Our graduates hold positions such as software architect, software analyst, project leader, systems administrator, database or network manager,... The holders of a Master’s Degree in Computer Science can also be hired in fundamental or applied science programs if they continue their studies and complete a doctoral dissertation. Access to further studies The Master’s Degree in Computer Science gives access to Advanced Master’s Degrees related to computer science and to doctoral studies. Mode of study Full time [-]

Master in Mechanical Engineering - taught in FRENCH

University of Mons
Campus Full time 2 years September 2017 Belgium Mons

The skills developed during the Master of Science in Mechanical Engineering are very wide. They are based on a common formation, the choice of a specialising field and the progressive and coordinated organization of personal works. [+]

This program is taught in FRENCH. The skills developed during the Master of Science in Mechanical Engineering are very wide. They are based on a common formation, the choice of a specialising field and the progressive and coordinated organization of personal works. Profile of the programme The common core programme provides a background in solid and fluid mechanics, in machinery, in heat transfer and in design/production. One third of the training is customised by the choice of one of three specialising field: The Controlled Systems focus allows to get into design of automated and mechatronic systems focusing on advanced integration of components from different technologies. The focus is mainly on continuous industrial processes and electronic controls. The Energy and Power Systems focus considers rational management of energy and on sustainable development. With this training, the engineer can play a vital role in the control of various processes for production, conversion and transmission of power and energy while reducing their harmful effects. This field directly benefits from the research done by the Energy Cluster. The Machine Design and Production Engineering focus provides an additional training in the design, production, operation and maintenance of mechanical systems in traditional industrial sectors. In particular, ones can notice courses offered in computer-aided kinematics and dynamics and in reliability of industrial plants. This training is linked to the Risk Cluster of the FPMs. Personal work and professional experience amount to 40% of the total study load. This enables integration and gradual application of skills acquired throughout the curriculum. In addition to the master thesis, the student in mechanical engineering carries out a second major personal assignment under the form of a project in the final year. This work, associated to the specialising field, enables to put into practice the specific skills of the specialization. It places the student in the position of the engineer who is assigned mission defined by industry. The master thesis contributes to research and development training and is a specific feature of engineering education. For example, among the various personal works, ones can find the following topics: Study, design and manufacture of a vehicle for the Shell Eco-Marathon competition; Simulation and vibration behaviour of a tennis racket ; Design, manufacture and development of a gyro-stabilised platform for radio-controlled helicopter performing aerial videos ; Study, design, manufacture and development of a robot for robotics cups; Experimental and numerical study of the improvement of heat transfer in spray cooling ; Improving vehicle efficiency (hybridation) ; Development of a simulation model of refrigeration plants; Modeling, analysis and optimisation of flysurf sails. Mechanical Engineering students can stay in a foreign institution in order to achieve part of their studies. Thus, each year some students carry out their Master thesis in the context of student exchange programmes such as Socrates-Erasmus (University of Stuttgart, Ecole Polytechnique Federale de Lausanne, INSA Lyon, Trinity College Dublin, Heriot-Watt University, Ecole Centrale de Nantes, Chalmers University of Technology in Gothenburg) and CIME (Laval University, Quebec). Others choose to obtain a double degree by spending two years in another institution of the TIME network (SUPAERO, Ecole Centrale de Lille, Universidad Politecnica de Madrid) to which FPMs belongs. In the context of these international exchanges, FPMs also hosts foreign students in the framework of their Master's degree in Mechanical Engineering. Key learning outcomes By the end of their programme in Engineering Sciences, the master graduates will be able to: Demonstrate expertise and versatility in the sciences and technology Formulate and analyse complex problems Adopt an applied scientific approach Innovate Implement solutions Plan and carry out projects in engineering Work in and lead a team Master scientific and technical communication Practice interpersonal communication appropriate to each context Be a critical, reflexive and independent professional Be a responsible person, in step with the stakes of society By the end of this specific course programme, the students will be able to: Master the basic principles governing the mechanics of solids and fluids, heat transfer and energy, the dynamic and vibrating behaviour of systems and the operation of machinery; Master the graphical modes and the techniques of representation of objects; Design and optimize mechanical systems or complete processes; For the focus on Machine Design and Production Engineering Design and define the optimal sizing of mechanical systems; Develop and operate units of mechanical production and ensure their maintenance and the quality control. For the focus on Energy and Power Systems Design and operate processes for production, conversion and transmission of power and energy; Ensure sound management of energy in industrial processes. For the focus on Controlled Systems Design and pilot mechatronic or automated systems; Incorporate and control components from different technologies, in varying operating conditions. Occupational profiles The Mechanical Engineering graduate from the FPMs is a generalist who has a wide range of skills and is therefore appreciated as a researcher and developer, designer, producer and manager of machinery, equipment and systems. He or she naturally finds his place in mechanical manufacturing industries in which he or she is required to develop new equipment (engines, vehicles, machinery, robots, ...). Within design offices, he or she takes part in the design of complete mechanical systems in response to client needs. He or she conceives their automatic steering with feedback systems to be adapted to varying operating conditions. In research and development, the mechanical engineer contributes to the creation of new products or processes. This activity is particularly important in leading sectors such as aerospace, aeronautics, automotive, biomedical... The production engineer is responsible for the production of goods and equipment. He or she implements its technical expertise and its skills in organizational problems. In the energy field, he or she provides innovative solutions in the design and optimisation for production and conversion of energy systems. The maintenance engineer is responsible for the availability of manufacturing units. Mechanical engineers are also employed to perform other varied functions. If initially, mechanical engineers are recruited on account of their technical skills, the evolution of their career often leads them to take more responsibility for management and organization. Access to further studies The Master of Science in Mechanical Engineering provides a professional qualification. The majority of graduates directly orient their activity towards a career in business. Some of them extend or deepen their education either by a complementary Master or a PhD in engineering science. Mode of study Full time [-]

Master in Computer Engineering and Management - taught in FRENCH

University of Mons
Campus Full time Part time 2 years September 2017 Belgium Mons + 1 more

The Computer Science, Management and Engineering course programme responds to two essential requirements of our time: on the one hand, the ever-growing need to computerise businesses, and on the other hand the need to manage activities more and more efficiently. [+]

Best Masters in Engineering & Technology in Belgium 2017. This program is taught in FRENCH. This master is organised in daytime and in part-time. The Computer Science, Management and Engineering course programme responds to two essential requirements of our time: on the one hand, the ever-growing need to computerise businesses, and on the other hand the need to manage activities more and more efficiently. Engineers have natural skills placing them at the forefront of computer science. They also have the ability to make a rational and methodical contribution to business management. Profile of the programme The courses focus on business management: human resources and communication, marketing, financial analysis and economic and financial calculations, managing innovation, team building, etc. management mathematics and operational research: mathematical programming, stochastic models of operational research, decision-making and management support, computer-aided manufacturing, etc. computer science: programming methodology and languages, databases, software engineering, artificial intelligence, system security and administration, etc. Personal assignments play a central part in the students’ training. They allow them to implement the scientific concepts taught in lectures and to acquire those skills gained mainly by experience, such as groupwork, leadership, time and deliverables management, conflict management, autonomy, … Therefore half of the programme is dedicated to guided personal projects linked to research fields in the Computer Engineering and Management specialism (decision-making, optimization, artificial vision, grid computing, innovation management, creativity). Students may complete part of their Master’s course (6 months) in other universities, such as Barcelona, Poznan, Dublin, … within the framework of the Erasmus exchange programme or a full year in a university of the TIME network (Top Industrial Managers for Europe) such as SupElec, SupAero, …. Key learning outcomes By the end of their programme in Engineering Sciences, the master graduates will be able to: Demonstrate expertise and versatility in the sciences and technology Formulate and analyse complex problems Adopt an applied scientific approach Innovate Implement solutions Plan and carry out projects in engineering Work in and lead a team Master scientific and technical communication Practice interpersonal communication appropriate to each context Be a critical, reflexive and independent professional Be a responsible person, in step with the stakes of society By the end of this specific course programme, the students will be able to: model and solve common optimization problems, and interpret the results; master and implement decision-aid methods; specify the needs for common computing applications, analyze, conceive and implement software meeting those needs; demonstrate a sense of innovation and creativity, develop analytical and autonomous thinking and put forward arguments in a debate on macroeconomics Occupational profiles Information technology, management mathematics and business management are now seen to be interconnected. A few examples will make this clear. Implementing an IT system has an effect on "communication" within the company, and thus also affects human resources management. Market research is unimaginable without the support of a statistical method for analysing the data. The management of stocks not only involves software, but also mathematical algorithms as well as assets management. Masters in Computer Engineering and Management combine those three complementary skills - IT, management mathematics and business management. Skills in IT and management are indispensable in all activity sectors. They open the doors to employment in all fields and ensure rapid progression to managerial positions in companies, or to freelance work, joining a small business or founding new companies. The most common roles fall into the following six categories: IT (consultancy – Management); organisation and planning (all enterprises and organisations); business management (banking – insurance); engineering (electrical and electronic construction, iron and steel metallurgy, chemicals); research and development (universities and research centres); various sectors (public sector, international organisations, other industries). Access to further studies The Master of Science in Computer Science, Management and Engineering can lead to postgraduate studies in order to specialize, do further training or research: either by completing another Engineering Master’s degree, at the University of Mons or any other European university, e.g. in Quality Control and Management, Industrial Risks and Operational Safety, Transportation Management, Master in Business Administration, etc. or by conducting a PhD thesis in engineering sciences possibly with the support of research clusters of the Faculty and the University of Mons. Mode of study Full time Master in Computer Engineering and Management in part-time The Faculty of Engineering of Mons offers the Master's degree in Computer Engineering and Management on a part-time basis. This training, given in Charleroi, is accessible to Engineers, Engineering technology graduates, Business Engineers, Agronomy Engineers or Sciences graduates. It is intended for adults inserted in the professional life, who already graduated from higher education and who wish to get the essential competencies in Computer sciences and Management in all sectors. The Faculty of Engineering of Mons is unique in Belgium, as it awards a degree in engineering which cumulates the triple capacity of computerization-organization and management. Education is designed for engineers in activity having at least three years of track records. The programmes and the timetables are arranged and adapted in order to reconcile education, professional life and personal life. [-]

Master in Electrical Engineering

University of Mons
Campus Full time 2 years September 2017 Belgium Mons

The main objective of the curriculum is to offer a good foundation in electrical sciences. All core courses dedicated to electrical students cover all the fields of electrical engineering such as electrical machines, electronics (including power electronics) and microprocessor systems [+]

The main objective of the curriculum is to offer a good foundation in electrical sciences. All core courses dedicated to electrical students cover all the fields of electrical engineering such as electrical machines, electronics (including power electronics) and microprocessor systems, automatic control, telecommunications, signals processing, computer networks, multimedia, embedded systems, advanced process control, robotics, bio-engineering, numerical analysis, high voltage networks, ... Profile of the programme Besides the core courses, the curriculum gives opportunities to develop personal work through projects, in particular with the Master thesis and other various projects within the framework of the two-year master's curriculum. These projects are for electrical engineering students the opportunity to perform all steps of the design of practical electrical systems, such as, for example (not exhaustive list): ADSL modems, GSM or MP3 codecs, industrial sorting system controls, camera memory card readers, identification of bioprocess models, electric vehicles, … Moreover, the electrical division offers students the opportunity to do their Master thesis abroad within the framework of student exchange programmes (ERASMUS) between the academic staff and a large number of universities or engineering schools all over the world (University of Stuttgart, University Laval in Quebec, University of Montreal, Ecole Polytechnique Federale de Lausanne, Institute of Technology at Linköping, University of Edinburgh, Ecole Nationale des Telecommunications de Paris, etc..). In particular, thanks to its membership of the TIME (Top Industrial Managers for Europe) network, the FPMs makes it possible for some students to get a double Master's degree with other institutions involved in the network (Supélec in Paris and Metz, Ecole Centrale de Lille, Politecnico di Milano, etc.). Finally, the third objective of the curriculum is to offer a specialization domain chosen among three focuses: Multimedia and Telecommunications (related to the FPMS NTIC cluster) has close links with the research centre MULTITEL, founded by the FPMs in 1999, which is known as a worldwide centre of excellence in the field of signal processing, information technology, and telecommunications. Students have the option of carrying out their Master thesis in collaboration with MULTITEL researchers with whom they also have privileged contacts in the framework of specialized courses. Biosystems Engineering (related to the UMONS BIOSYS cluster), makes links between process modeling & control, signal processing, and life science engineering . This specialism allows to provide electrical engineers with a solid background, not only in industrial process automation, but also in biological systems modeling and biomedical signal processing. Energy & Electricity (related to the FPMS ENERGY cluster) focuses on current key issues in the specialization field, such as renewable energies, the liberalization of the electricity market, transport… Moreover, it offers the opportunity of carrying out a major corporate study in collaboration with industry. This work aims to provide results directly usable by the associated companies. The courses in "Multimedia and Telecommunications" and "Biosystems Engineering" are taught in English, and the examination is done either in English or in French, according to the student’s preference. Key learning outcomes By the end of their programme in Engineering Sciences, the master graduates will be able to: Demonstrate expertise and versatility in the sciences and technology Formulate and analyse complex problems Adopt an applied scientific approach Innovate Implement solutions Plan and carry out projects in engineering Work in and lead a team Master scientific and technical communication Practice interpersonal communication appropriate to each context Be a critical, reflexive and independent professional Be a responsible person, in step with the stakes of society By the end of this specific course programme, the students will be able to: Resolve complex issues related to all aspects of the use of electricity as power support and / or information support. Develop and apply methodologies and cutting edge technologies for efficient design and implementation of solutions to problems For the focuses, Solve complex problems more specialized in one or more areas: electronics, microelectronics, information technology (hardware and software), telecommunications, telematics, .. (Multimedia and telecommunications focus) automation, robotics, environmental systems and biotechnologies, biomedical engineering (biosignals), .. (Biosystems Engineering focus ) generation, transportation and distribution of electric energy, power electronics, electrical machines, .. (Energy & Electricity focus) Occupational profiles Inheriting from 200 years of technological developments stemming from the “magic of light”, electrical engineers have been assigned a wide variety of missions. A closer look at the various positions occupied by the electrical engineers of our Faculty reveals a great diversity of functions : in research offices, research labs, in the service sector (banks, insurance companies, etc.), in education (in Belgium and abroad), in the public sector, in supervising committees, transportation, telecommunications (telephony, broadcasting, satellites, fiber optics , wireless, multimedia, networks), in the production and transportation of energy, in electrical and mechanical engineering, …. From the giant electric power station to transoceanic photonic data links, via the microprocessor, the electrical engineer is required to study all aspects of the operation of electricity: Design and delivery of electrical power networks, telecommunication satellites, fiber optic cables for intercontinental data links; man-machine interfaces, such as speech recognition; modeling and automation of industrial processes; Design and production of microelectronic circuits; Development of renewable energies; Development of still growing scope of microprocessors; Activities in the biomedical field, where the electrical engineer is a true partner of the doctor; Business computerization and telematic networks (Internet, Intranet and fast networks). Access to further studies The Master’s degree in Electrical Engineering can lead to postgraduate studies in order to specialize, do further training or research: either by completing another Engineering Master’s degree, at the University of Mons or any other European university, e.g. in Quality Control and Management, Industrial Risks and Operational Safety, Transportation Management, Master in Business Administration, etc. or by conducting a PhD thesis in engineering sciences possibly with the support of research clusters of the Faculty and the University of Mons. Mode of study: Full time [-]

Master in Geology and Mining Engineering - taught in FRENCH

University of Mons
Campus Full time 2 years September 2017 Belgium Mons

Most of the mineral and energy resources are buried into the ground. Therefore, the Master of Science in Geology and Mining Engineering is a major actor in prospection and evaluation of deposits, extraction of ores and hydrocarbons, and in the processing of ores and minerals. [+]

Best Masters in Engineering & Technology in Belgium 2017. This program is taught in FRENCH. Most of the mineral and energy resources are buried into the ground. Therefore, the Master of Science in Geology and Mining Engineering is a major actor in prospection and evaluation of deposits, extraction of ores and hydrocarbons, and in the processing of ores and minerals. In addition, these processes will be dealt by the Master of Science in Geology and Mining Engineering with the most adequate technical and economic means together with the lowest environmental impact. Human infrastructures, set up at the surface and into the subsurface of the earth, strongly rely on the characteristics of the soils and rocks. The expertise of the Master of Science in Geology and Mining Engineering is therefore of prime importance to the design and the achievement of civil engineering projects such as tunnels, dams, bridges, buildings, underground storage, etc. Masters of Science in Geology and Mining Engineering prevent effects on human infrastructures of natural events such as earthquakes, landslides, etc. He or she will also prevent the impacts of human activities on the environment and on natural resources. In other words, the engineer is involved in problems such as groundwater protection area, rehabilitation of polluted sites, geological storage of CO2 and radioactive waste. Profile of the programme During the course of their studies, students in geology and mining engineering acquire a good knowledge both in Earth sciences and in engineering sciences. A basic training in Earth sciences - geology, mineralogy, petrography, stratigraphy, palaeontology and tectonics - is completed by training in hydrogeology, in applied geophysics, in geostatistics and modelling in geology. The training in mining engineering concerns rock mechanics, modelling in rock mechanics, extraction of mineral resources, mineral and waste processing, drilling technologies and reservoir engineering. The training in mining and geology offers two options: Resources and Infrastructures focused on ore-forming processes, design and construction of mining-like structures and, planning and optimisation of mining operations (Project) Environment and Natural Risks focused on management of geological risks, characterisation of brownfields subsurface and remediation of polluted soils. It also contains a specific project. Practice both in laboratory and on the field is specific to geology and mining engineering studies. Corporate visits, field excursions, field camps and a study tour are organised during the course of the studies. Learning is strongly connected with research (The Mining and Geology Division participates to 3 of the 5 research clusters of the Faculty of Engineering – Materials, Energy and Risks). Erasmus conventions were signed with several Institutions, especially in Spain. Key learning outcomes By the end of their programme in Engineering Sciences, the master graduates will be able to: Demonstrate expertise and versatility in the sciences and technology Formulate and analyse complex problems Adopt an applied scientific approach Innovate Implement solutions Plan and carry out projects in engineering Work in and lead a team Master scientific and technical communication Practice interpersonal communication appropriate to each context Be a critical, reflexive and independent professional Be a responsible person, in step with the stakes of society By the end of this specific course programme, the students will be able to: Solve problems in applied geology: identifying and understanding geological and underground structures, characterisation and evaluation of mineral and energy resources deposits, production of water. Solve problems in mining engineering: planning and optimisation of extraction of mineral and energy resources, design and construction of mining-like structures (tunnels, dams), deep drilling and mineral processing. Manage problems of environment and sustainable development in connection with mineral and energy resources, water resources, waste, polluted sites, geological hazards. Apply adequate methodologies, techniques and tools to efficiently solve technical, economic and environmental issues as mentioned above. Show initiative, autonomy and ability of observation and analysis. Occupational profiles Graduating in geology and mining engineering offers a wide range of job opportunities worldwide as well as in Belgium. Extractive industries and, more generally speaking, heavy industries are the traditional sectors of employment. Masters of Science in Geology and Mining Engineering find jobs in mines and quarries, oil and gas production companies, groundwater production companies, cement works, mineral processing plants, steelmaking plants, etc. They occupy positions both in production departments as well as in R&D departments. There are also job opportunities in fields such as engineering geology and geotechnics for activities like: designing and construction of tunnels, dams and bridges or the management of geological risks (earthquakes, landslides, etc.), both in construction companies and in consultancies. Their training, both in Earth sciences and in engineering sciences, gives Masters of Science in Geology and Mining Engineering opportunities of employment in the field of the environmental engineering, with activities as diverse as the rehabilitation of mine and quarry sites, the management of waste, the study and prevention of environmental impact of industrial activities, the remediation of polluted sites. Research offers also careers both in R&D Centres and in Universities. The University provides numerous opportunities of appointment through contracts with private companies and public services and awards PhD degree. (See also topic “Assess to further studies”) Access to further studies The Master of Science in Geology and Mining Engineering can lead to postgraduate studies in order to specialize, do further training or research: either by completing another Engineering Master’s degree, at the University of Mons or any other European university, e.g. in Quality Control and Management, Industrial Risks and Operational Safety, Transportation Management, Master in Business Administration, etc. or by conducting a PhD thesis in engineering sciences possibly with the support of research clusters of the Faculty and the University of Mons. Mode of study: Full time [-]

Master in Architectural Engineering - taught in FRENCH

University of Mons
Campus Full time 2 years September 2017 Belgium Mons

The training deals with a strong creative spirit, necessary to the role of architecture, as well as to a deep knowledge of the engineering techniques. [+]

This program is taught in FRENCH. The Architecture and Building Engineer shows creativity and realism by taking into account contemporary socio-economic challenges. At the end of the five-year programme, his/her knowledge permits to tackle some problems of the society and to play a responsible role. Profile of the programme The training deals with a strong creative spirit, necessary to the role of architecture, as well as to a deep knowledge of the engineering techniques. These two complementary aspects are commonly developed along the training and they are reinforced by several university exchanges (ERASMUS, TIME, in collaboration with high schools, universities or industries). Their creativity is highlighted through architecture projects, done individually or collectively. The main subjects of the curriculum in Architecture and Building engineering lead to a multipurpose profession : Human science: to adapt the building to the cultural and social environment : history of the architecture, sociology, economy, legislation. Architectural act: to develop aesthetic and creativity: urbanism, architectural arrangement, restoration, industrial design. Engineering and structural design to guarantee stability and security of the constructions : knowledge of building materials (steel, concrete, wood, masonry), structural verifications according to European standards, fire engineering, techniques of construction and restoration, planning, pathologies, ... Special techniques and environmental aspects, necessary for comfortable and reliable use: ventilation, air cooling, thermal insulation. Two optional programmes are suggested. They give the possibility to improve some topics related to research fields previously studied for several years. The optional programme concerns the energy saving in buildings and the restoration of historical buildings. Sustainable energy use in buildings – UDEBat In the early seventies, the industries began to deal with saving energy, but we have to say that the building industry took a long time to react with, sometimes, poor solutions. Today, it is common to analyse the use of the energy according its effects on people and on the environment. For several years now, the FPMS energy cluster has been dealing with sustainable use of energy in buildings. It concerns the use of primary energy, the distribution of heat, venting, air-conditioning and heat stock possibilities. Restoration Management The restoration of old buildings covers different fields which regroup a certain amount of historical, architectural, technical and scientific knowledge. With almost forty years of experience within several laboratories of the Faculty, these modules give further information to the restoration lectures. Sanitary studies and specific diagnostics applied to the field of restoration, are well represented in the lectures. They concern the description of new techniques for pathology analysis, as well as for preservation and restoration. Key learning outcomes By the end of their programme in Engineering Sciences, the master graduates will be able to: Demonstrate expertise and versatility in the sciences and technology Formulate and analyse complex problems Adopt an applied scientific approach Innovate Implement solutions Plan and carry out projects in engineering Work in and lead a team Master scientific and technical communication Practice interpersonal communication appropriate to each context Be a critical, reflexive and independent professional Be a responsible person, in step with the stakes of society By the end of this specific course programme, the students will be able to: Master urban and architectural design for building projects (remodelling of a neighborhood, restoration and renovation, collective and individual housing); Design structures according to their stability and serviceability; Apply the fundamental notions to solve problems in the fields of indoor and outdoor lighting, of sound transmission and reverberation, of energetic performance of buildings; For the optional programme “Restoration Management”, Master the disciplines and the methods used during the restoration of historical buildings; For the optional programme “Sustainable energy use in buildings”, Master the disciplines and the methods dealing with sustainable energy used in buildings; Occupational profiles Today, the Architecture and Building Engineer plays a main role in the field of urban design. The multipurpose training leads to several types of professional careers. The main role of Architecture and Building Engineers is to deal with the design and the construction of buildings such as family homes, large residential complexes, office buildings, exhibition halls or leisure centers. Moreover, their skills are extended to civil engineering tasks such as draining, road networks, foundations, or footbridge. He or she offers their competence as a consulting engineer, as a freelance or in a design office, in an architecture office, in a construction company or in the public administration. In his or her professional activities, the Architecture and Building Engineer takes care of the user’s comfort but also of their environment by proposing innovative solutions with regards to the architecture of the building: lighting, acoustic, air conditioning, heating and ventilation. Their artistic sensitivity and their architectural culture allow to deal with urban and rural renovations, rehabilitations of old buildings and to propose well adapted solutions for town and country planning works. As for the architects, a two-year mandatory internship is required in order to lead architectural projects, on their own behalf. Access to further studies The Master in Architecture and Building Engineering can lead to postgraduate studies in order to specialize, do further training or conduct a PhD thesis. Mode of study Full time [-]

Master of Science in Electronics and ICT Engineering Technology

KU Leuven - University of Leuven
Campus Full time Part time 1 - 2 years September 2017 Belgium Leuven + 1 more

In this master's programme you learn to correctly assess the workings and impact of various electronic technologies. You learn to design and implement existing analogue and digital electronic systems and leverage this knowledge to complex information [+]

Best Masters in Engineering & Technology in Belgium 2017. In this master's programme you learn to correctly assess the workings and impact of various electronic technologies. You learn to design and implement existing analogue and digital electronic systems and leverage this knowledge to complex information and communication systems. Intelligent Electronics option In the Intelligent Electronics option you will use a combination of hardware and software to develop and implement so-called embedded systems (e.g. cell phones, MP3 players, digital cameras, etc.). You learn to take into consideration limitations in the areas of I/O possibilities, memory, speed and energy consumption. Internet Computing option The Internet Computing option adopts a more broadly distributed approach to developing computer applications. The advantages to this are high reliability, scalability, high performance, easy maintenance, low cost price, etc. Examples of applications based on this approach include web-based and internet applications like search robots and voice-over IP, as well as e-commerce, enterprise resource management, and user applications in the area of info-/edu-/entertainment. This is an initial master's programme and can be followed on a full-time or part-time basis. Add an in-company or project-based learning experience to your master's programme You can augment your master's programme with the Postgraduate Programme Innovation and Entrepreneurship. This programme is made up by a multifaceted learning experience in and with a company, with an innovative engineering challenge as the central assignment. It is carried out in a team setting, has a distinct international dimension, and usually requires a multidisciplinary approach. Entrepreneurs and students alike are encouraged to innovate, transfer knowledge and grow. It is a unique cross-fertilisation between company and classroom. Career paths On completion of the programme, you will be an industrial engineer with a broad foundation of general skills and technical knowledge. At the same time, you will be familiar with the fascinating world of information processing, which plays a crucial role in many social sectors. Often, you will also play a key role in the development of a variety of digital media applications ranging from modern consumer products (positioning and navigation systems; smartphones; digital audio and video) to custom stand-alone or networked applications. An increased fee (€ 6000) is not applicable for students who come from countries belonging to the European Economic Area (EEA), the regular fee is €890 [-]