Master's Degree in Automation / Autonomous Systems in Shanghai in China

View Masters Programs in Automation / Autonomous Systems 2017 in Shanghai in China

Automation / Autonomous Systems

A masters is earned after students complete an undergraduate degree program. To obtain a masters, you usually need to complete 12 to 18 college courses that often involve completing comprehensive tests and/or a thesis.

Automation program MSc in Automation / Autonomous Systemsknowledge and broad professional skills to design, develop, implement, manage and supervise automation methods for manufacturing plants, industrial processes, distribution systems, environmental systems.

China, officially the People's Republic of China, is a sovereign state located in East Asia. It is the world's most populous country, with a population of over 1.35 billion.

Request Information Master's Degrees in Automation / Autonomous Systems in Shanghai in China 2017

Read More

Master Degree in Engineering of Building Processes and Systems (Curriculum Historic Buildings Rehabilitation)

University of Bologna School of Engineering and Architecture
Campus Full time 2 years September 2017 China Shanghai

The HBR (Historic Building Rehabilitation) international curriculum of the Masters in Engineering of Building Processes and Systems was built to meet the needs of new professionals, able to integrate the functions traditionally found within the process, by focusing on the critical analysis of the historical heritage, the diagnosis of conservation conditions, the definition of procedures and techniques for consolidation and rehabilitation of the artefacts, by applying effective methods and solutions, compatible with the protection of the heritage characters. More information here: http://corsi.unibo.it/2cycle/HistoricBuildings/Pages/default.aspx [+]

Masters in Automation / Autonomous Systems in Shanghai in China. The innovation in both technical and organizational structure is increasing the complexity of the building process. The emergence of more stringent requirements and the intense penetration of new materials and technologies take special relevance in consolidation, recovery and rehabilitation of historic buildings, which is a market segment in steady expansion. The growing cultural value attributed to the existing building and the economic and environmental benefits associated with its conservation are expanding this market, whose further development fuels a demand for high-profile skills, able to meet its specific characteristics and constraints. The HBR (Historic Building Rehabilitation) international curriculum of the Masters in Engineering of Building Processes and Systems was built to meet these needs of new professionals, able to integrate the functions traditionally found within the process, by focusing on the critical analysis of the historical heritage, the diagnosis of conservation conditions, the definition of procedures and techniques for consolidation and rehabilitation of the artefacts, by applying effective methods and solutions, compatible with the protection of the heritage characters. The course is a two-years Master “second cycle Degree” requiring the students to obtain 120 ECTS. The program is two years in duration and is divided into four terms. In the first year, courses are mainly oriented to address basic issues of the Master’s studies: History of Italian and European Architecture; Conservation Theory of Historic Buildings and Heritage Conservation; Survey of Historic Buildings, Materials and Technologies for Historic Buildings; Advanced Structural Mechanics and Mechanics of Historic Masonry and Wood Structures. Additionally, a Design Project course aims at training the students in applying to a case-study the acquired knowledge. In the second year, both compulsory and elective courses are offered on specialized topics, such as Structural Diagnostics, Seismic Assessment and Rehabilitation; Geotechnical Engineering for the Preservation of Historic Buildings; Mineralogical and Petrographical Characterization of Natural and Artificial Stone Materials. The program is entirely taught in English, and requires the student a proficient use of the English language. At the end of the program, a degree titled "Master in Engineering of building processes and Systems" (Laurea Magistrale in Ingegneria dei Processi e dei Sistemi edilizi, Classe LM-24) is awarded and is valid under Italian law. The title enables graduates to take the exam for Professional Engineer qualification (Sector: Civil and Environmental) HBR Master students have the opportunity to obtain a double degree: from the University of Bologna ( MSc in Engineering of Building Processes and Systems) and from the Tongji University, Shanghai, China (MSc in Architecture and Civil Engineering) . Graduates of the program will have the training to go on to work in numerous fields, including Public Administrations, Companies carrying out works of consolidation and recovery of historic buildings, and many other specific sectors, such as production of building components, diagnostic and survey services, facility management. Completion of the HBR Master degree can also lead to entering PhD level studies. More information about the application procedure here [-]

Master's Degree in Automation Engineering

University of Bologna School of Engineering and Architecture
Campus Full time 2 years

The Master Degree in Automation Engineering is a two-year programme fully delivered in English. The Degree provides students advanced competencies in many important fields of Automation, such as robust control, system theory, software for real time control, vision systems, mechanical systems, design of advanced automatic machines, diagnostic systems. [+]

The Master Degree in Automation Engineering is a two-year programme fully delivered in English. The Degree provides students advanced competencies in many important fields of Automation, such as robust control, system theory, software for real time control, vision systems, mechanical systems, design of advanced automatic machines, diagnostic systems. Within this Master Degree Programme students have 2 possibilities: Master Degree in Automation Engineering for 2 years in Bologna; Double-Degree Master Programme with Tongji University (AlmaTong Programme). For these students, classes of the first year will be held in Bologna. Then, students will attend classes in Shanghai for a period of 3 semesters. Upon completion of their studies, including a final graduation project, they will obtain two Master degrees: “Laurea Magistrale in Automation Engineering / Ingegneria dell’automazione” from the University of Bologna; “Msc in Control Theory and Control Engineering” from Tongji University. Admission Requirements The admission to this programme is granted to applicants that comply, first, with the curriculum requirements, secondly with the necessary prior preparation and thirdly with the language requirements (section 1.3). If the curriculum requirements are not complied with, the access to the Second Cycle Degree in Automation Engineering/Ingegneria dell'Automazione is denied. If the curriculum requirements are complied with, the applicant's prior preparation has to be assessed. The admission is granted if all requirements are fulfilled. The procedures to verify curriculum requirements and prior preparation are listed below. Curriculum requirements To be admitted to the Second cycle Degree in Automation Engineering/Ingegneria dell'Automazione the applicant must hold a University degree of at least three years (or achieved through the acquisition of at least 180 ECTS –CFU), or another degree obtained abroad and recognized by the Automation Engineering Board as equivalent. Admission to the Second cycle Degree in Automation Engineering/Ingegneria dell'Automazione is reserved to: a) Students graduated from Italian first cycle courses (“Lauree”) of the “Information Engineering area” (area 8, as defined in the DM 270/04 and area 9, as in DM 509/99) or in the “Industrial Engineering area” (area 9 as in the DM 270/04 and area 10 as in DM 509/99) whose name contains “Ingegneria dell'Automazione” or “Ingegneria Meccatronica”. Italian first cycle courses included in this definition have adequate curricula. b) Students graduated from Italian first cycle courses of the “Information Engineering area” (area 8, as defined in the DM 270/04 and area 9, as in DM 509/99) or in the “Industrial Engineering area” (area 9, as in the DM 270/04 and area 10, as in DM 509/99) with a final mark of at least 110/110. c) Students graduated from Italian first cycle courses of the “Information Engineering area” (area 8, as defined in the DM 270/04 and area 9, as in DM 509/99) or in the “Industrial Engineering area” (area 9, as in the DM 270/04 and area 10, as in DM 509/99) with a final mark less than 110/110 but complying with the following requirements: - at least 6 CFU in the SSD ING-INF/04; - at least 12 CFU in the set of SSD: ING-IND/13, ING-IND/32, ING-INF/05. d) Students graduated from Italian first cycle courses complying with all the following requirements: - at least 30 CFU in the SSD MAT/02, MAT/03, MAT/05, MAT/06, MAT/07, MAT/08, FIS/01, FIS/03; - at least 6 CFU in the SSD ING-INF/04 - at least 12 CFU in the set of SSD: ING-IND/13, ING-IND/32, ING-INF/05. The same criteria of point d) shall also apply to those who hold a University degree obtained abroad and deemed appropriate by the Automation Engineering/Ingegneria dell'Automazione Board for which it is possible to convert the degree score to the Italian system, and to identify the scientific areas and the number of credits obtained in each sector. Otherwise, the career of the applicant shall be assessed by the Automation Engineering/Ingegneria dell'Automazione. In very exceptional cases, the Automation Engineering/Ingegneria dell'Automazione Board can assign differentiated didactic plans in compliance with the “Degree Programme Regulation” to those Students with particular previous academic curricula. Such differentiated didactic plans do not concern students who have the First cycle Degree in Ingegneria dell'Automazione acquired at University of Bologna. Language requirements Adequate proficiency in English (at least B2 level according to CEFR) is required for admission to the Second cycle Degree in Automation Engineering/Ingegneria dell'Automazione. Candidates submitting a certificate issued by a recognized institution (e.g. TOEFL, IELTS, Cambridge Esol, ...) proving such knowledge are exempted from further assessment. Otherwise, English proficiency of the candidate is assessed by a Commission nominated by the Automation Engineering/Ingegneria dell'Automazione Board. Whenever English knowledge is not considered adequate, the Automation Engineering/Ingegneria dell'Automazione Board may require the Student to fill the gap before registering any exam of their second year. Expected learning outcomes The specific learning outcomes of the 2nd cycle degree programme in Automation Engineering aim to produce professional figures with a solid basic and specific background able to cover management, design and coordination roles in companies requiring knowledge of sizing and implementation of highly complex architectures, automatic and robotic systems, automation processes and plants which integrate computer components, measuring, transmission and actuation equipment. Therefore, they will have an in-depth knowledge of the specific subjects of this class, with particular attention to the fields of advanced design, innovation and development of production, planning and programming, management and organisation of complex systems. It follows that graduate automation engineers possess in-depth interdisciplinary knowledge of the automation, mechanical, computing, electronics and electro technical sectors. Graduates will possess the following skills: Inclination for advanced design, integrating mechanical, electric, computing and control aspects, for particularly complex automation systems and with high levels of innovation; Organisational skills even in complex industrial systems; In-depth knowledge of the automation sector. The computing facilities and laboratories available to students, and which are constantly being enhanced, provide the setting for students to practically apply the knowledge, working autonomously and in groups. Internships will also be available through the collaboration with many local companies with which the university has signed cooperation agreements. Moreover, students may obtain a dual degree: the 2nd cycle degree in Automation Engineering from the University of Bologna and an MSc in Control Theory and Control Engineering from Tongji University in Shanghai, China. This opportunity allows students to gain extensive experience abroad (also in the industrial field, with compulsory internships) and acquire considerable transversal and interpersonal skills. [-]